Abstract:Lithium–oxygen (Li–O2) batteries are outstanding as next-generation energy-storage devices because of their extremely high theoretical specific energy density. However, their practical application is hindered by various issues from both unstable electrodes and electrolyte. Notably, the uncontrollable growth of a lithium dendrite and severe lithium pulverization deteriorates the practical energy density and service life of Li–O2 batteries. Here we build a flexible protective membrane, which is reduced graphene oxide coated on nonwoven fabrics (rGO @ NWF), for a stable Li metal anode/electrolyte interface via a simple dipping-penetration and in situ electrochemical reduction strategy. The lowest lithium nucleation overpotential on rGO sheets results in the uniform lithium deposition behavior on the Li anode surface with the rGO protective nanofilm after different plating capacities, which is demonstrated by SEM analysis. The cycling life of the Li–O2 cell with a membrane extended to more than 500 cycles under the limited capacity of 500 mA h g–1, which is about 3-fold that of the pure Li anode. This work demonstrates a scalable approach to inhibit the growth of the lithium dendrite and corrosion of Li metal anodes by rGO nanofilm for long-term cycling Li–O2 batteries, holding an excellent potential for the development of other lithium metal batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01316?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01316</a>.Schematics of cell configuration, photos of commercial NWF in large scale, SEM images and NWF membranes, impedance spectroscopy of symmetric cells with pure Li and membrane after the first cycle, photograph and SEM images of pristine Li metal, SEM image of membrane after the first cycle in the symmetric cell, plating/stripping voltage profiles of Li metal with membrane and , lifespan curves of LOBs with pure Li, with NWF membrane and with membrane, SEM images of pristine NSGA and SEM images of NSGA after 50 cycles in cells with pure Li, with NWF membrane, and with membrane (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01316/suppl_file/ae0c01316_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Engineering rGO/MXene Hybrid Film as an Anode Host for Stable Sodium-Metal Batteries

A robust, highly reversible, mixed conducting sodium metal anode

Ultrahigh areal capacity and long cycle stable sodium metal anodes boosted by 3D printed sodiophilic MXene/rGO microlattice aerogel

3D-Printed Sodiophilic V 2 CT x /rGO-CNT MXene Microgrid Aerogel for Stable Na Metal Anode with High Areal Capacity

3D printed Au/rGO microlattice host for dendrite-free sodium metal anode

In Situ Plating of Mg Sodiophilic Seeds and Evolving Sodium Fluoride Protective Layers for Superior Sodium Metal Anodes

A simple and effective host for sodium metal anode: 3D printed high pyrrolic-N doped graphene microlattice aerogel

3D Printed Sodiophilic Nb2CTx/Reduced Graphene Oxide Monoliths Enable Long Cycle Stability of Sodium Metal Anodes

Processable and Moldable Sodium Metal Anodes.

3D‐Printed Hierarchically Microgrid Frameworks of Sodiophilic Co3O4@C/rGO Nanosheets for Ultralong Cyclic Sodium Metal Batteries

One-step and Universal Fabrication of MXene/metal Sodiophilic Frameworks Via Lewis Acidic Etching Toward Dendrite-Free Sodium Metal Anodes

Simultaneous Formation of Artificial SEI Film and 3D Host for Stable Metallic Sodium Anodes

Long Cycle Life and High‐Rate Sodium Metal Batteries Enabled by Regulating 3D Frameworks with Artificial Solid‐State Interphases

MXene-rGO Aerogel assisted Na3.5MnTi(PO4)3 Cathode for High-performance Sodium-ion Batteries

Flexible rGO @ Nonwoven Fabrics’ Membranes Guide Stable Lithium Metal Anodes for Lithium–Oxygen Batteries

Ultrafine Tin Oxide on Reduced Graphene Oxide As High-Performance Anode for Sodium-Ion Batteries

Stabilize Sodium Metal Anode by Integrated Patterning of Laser‐Induced Graphene with Regulated Na Deposition Behavior

Enabling High-Performance Sodium Metal Anodes Via A Sodiophilic Structure Constructed by Hierarchical Sb2MoO6 Microspheres

Stable Sodium Metal Anode Enabled by an Interface Protection Layer Rich in Organic Sulfide Salt

Definable Two-Dimensional Mesoporous Polydopamine-Graphene Heterostructure as Multi-Functional Ion Redistributor for Ultrastable Sodium Metal Anodes

Synchronous Promotion in Sodiophilicity and Conductivity of Flexible Host via Vertical Graphene Cultivator for Longevous Sodium Metal Batteries