Abstract:LISA is the proposed ESA-NASA gravitational wave detector in the 0.1 mHz - 0.1 Hz band. LISA Pathfinder is the down-scaled version of a single LISA arm. The arm -- named Doppler link -- can be treated as a differential accelerometer, measuring the relative acceleration between test masses. LISA Pathfinder -- the in-flight test of the LISA instrumentation -- is currently in the final implementation and planned to be launched in 2014. It will set stringent constraints on the ability to put test masses in geodesic motion to within the required differential acceleration of 3\times10^{-14} m s^{-2} Hz^{-1/2} and track their relative motion to within the required differential displacement measurement noise of 9\times10^{-12} m Hz^{-1/2}, around 1 mHz. Given the scientific objectives, it will carry out -- for the first time with such high accuracy required for gravitational wave detection -- the science of spacetime metrology, in which the Doppler link between two free-falling test masses measures the curvature. This thesis contains a novel approach to the calculation of the Doppler response to gravitational waves. It shows that the parallel transport of 4-vectors records the history of gravitational wave signals. In practice, the Doppler link is implemented with 4 bodies in LISA and 3 bodies in LISA Pathfinder. To compensate for noise sources a control logic is implemented during the measurement. The closed-loop dynamics of LISA Pathfinder can be condensed into operators acting on the motion coordinates, handling the couplings, as well as the cross-talks. The scope of system identification is the optimal calibration of the instrument. This thesis describes some data analysis procedures applied to synthetic experiments and shows the relevance of system identification for the success of LISA Pathfinder in demonstrating the principles of spacetime metrology for all future space-based missions.

On-ground tests of LISA PathFinder thermal diagnostics system

Outgassing, Temperature Gradients and the Radiometer Effect in LISA: A Torsion Pendulum Investigation

Design of the magnetic diagnostics unit onboard LISA Pathfinder

The diagnostics subsystem on board LISA PathFinder and LISA

The end-to-end testbed of the Optical Metrology System on-board LISA Pathfinder

Inflight magnetic characterization of the test masses onboard LISA Pathfinder

Inertial sensor surface properties for LISA Pathfinder and their effect on test mass discharging

Development of a capillary temperature control system for capillary electrophoresis instruments designed for spaceflight applications

ADC non-linear errors correction in thermal diagnostics for the LISA mission

Interpolation of the magnetic field at the test masses in eLISA

Estimation of the electrostatic effects in the LISA-Pathfinder critical test mass dynamics via the method of moments

Sensor noise in LISA Pathfinder : An extensive in-flight review of the angular and longitudinal interferometric measurement system

Picometer-stable hexagonal optical bench to verify LISA phase extraction linearity and precision

Design and construction of an optical test bed for LISA imaging systems and tilt-to-length coupling

Calibrating the system dynamics of LISA Pathfinder

Optical testbed for the LISA phasemeter

Design and thermal characteristic test of a temperature control system for spacecraft precision instrument

Conditional Hardness for Approximate Coloring

Spacetime Metrology with LISA Pathfinder

Development of Diagnostics for High-Temperature High-Pressure Liquid Pb-16Li Applications

Design and Fabrication of a Phase Change Material Heat Storage Device for the Thermal Control of Electronics Components of Space Applications