Abstract:In this work, a ∼220 μm-thick heterogeneous remelted layer is achieved in the coarse-grained AZ41 Mg alloy by the laser surface remelting treatment. Microstructural evolution observations reveal that the remelted heterogeneous layer consists of gradient refined equiaxed α-Mg grains (average grain size from ∼4.6 μm in the bottom to ∼ 60 nm at the surface) and dispersed block-shaped nanoscaled β-Mg17Al12 precipitations (∼22.8 nm), which is obviously different from the favored coarse dendritic or cellular α-Mg grains and lamellar β precipitations during conventional laser processing. The formation of this remelted layer is attributed to constitutional supercooling caused by solute elements and the thermal undercooling generated by the high cooling rates based on optimized processing parameters and liquid nitrogen cooling. The heterogeneous nanostructured remelted layer makes the laser-treated sample has a high hardness of 1.51 GPa, a yield strength of 230.4 MPa and an ultimate tensile strength of 313.7 MPa with a good ductility (12.5%). The laser-treated samples also show the higher fatigue lifetimes in low-cycle as well as high-cycle fatigue tests, which are respectively 2.3 and 18.6 times higher than the original samples. In addition, the laser-treated specimen exhibits a 25% higher fatigue limit compared with the original sample. The synergistic strengthening mechanism including gradient grain refinement and dispersed nanoscaled precipitations are quantitatively discussed to improve strength-ductility synergy and strain hardening capacity in the laser-treated samples. This mechanism could effectively facilitate resisting the initiation and propagation of the fatigue microcracks, which was further validated by the in-situ transmission electron microscope observations. Our results in this study could be further applied for the modification of grain morphology and precipitation distribution for additive manufacturing applications, critical to the development of advanced structural Mg alloys with high service performance in practical engineering environments.

Fabrication of thin silicon flakes through dealloying from laser directed energy deposition Ca-Si alloys

Developing of nano sized fibrous eutectic silicon in hypereutectic Al–Si alloy by laser remelting

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Multi-scale investigation of A356 alloy with trace Ce addition processed by laser surface remelting

Improving Surface Electrochemical Polishing Quality of Additive Manufactured AlSi10Mg by Reconstituting the Si Phase

Manipulating microstructure and mechanical properties of laser powder bed fusion processed hypo-eutectic Al-13.3Mg 2 Si alloy via annealing

Enabling plastic co-deformation of disparate phases in a laser rapid solidified Sr-modified Al-Si eutectic through partial-dislocation-mediated-plasticity in Si

Fabrication of CaSiO 3 LTCC high aspect ratio microstructure by laser chemical assisted micro-milling

Three-dimensional morphology of an ultrafine Al-Si eutectic produced via laser rapid solidification

Surface Micromorphology and Nanostructures Evolution in Hybrid Laser Processes of Slicing and Polishing Single Crystal 4H-Sic

Effects of Laser Rescanning on Microstructure and Mechanical Properties of Al-10Si-1Mg Alloy Produced by Laser-Directed Energy Deposition

Selective Laser Melting Rapid Forming Technology of Aluminum Alloy Liquid Cold Plate

Rapid Solidification and Non-equilibrium Phase Constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg Alloy: Analysis of Nano-precipitates, Eutectic Phases, and Hardness Evolution

Modifying single-crystal silicon and trimming silicon microring devices by femtosecond laser irradiation

Effect of process parameters on microstructures and properties of Al-42Si alloy fabricated by selective laser melting

Crystallography and Interface Structures in As-Arc Melted and Laser Surface-Remelted Aluminum–Silicon Alloys with and without Strontium Addition

Si-Assisted Solidification Path and Microstructure Control of 7075 Aluminum Alloy with Improved Mechanical Properties by Selective Laser Melting

Superior strength-ductility synergy and fatigue resistance of heterogeneous structured AZ41 Mg alloy by laser surface processing

In Situ Prediction of Microstructure and Mechanical Properties in Laser-Remelted Al-Si Alloys: Towards Enhanced Additive Manufacturing

Investigations of the processing–structure–performance relationships of an additively manufactured AlSi10Mg alloy via directed energy deposition

Softening kinetics and mechanism during the annealing of an Al-Si alloy produced by laser powder bed fusion