Abstract:Applications of solid-phase microextraction (SPME) in the measurement of very hydrophobic organic compounds (VHOCs) are limited, partly due to the difficulty of calibrating SPME fibers for VHOCs. This study used a static SPME strategy with a large sample volume (1.6L) and a five-point calibration procedure to determine the distribution coefficients for a large suite of polychlorinated biphenyls (PCBs) and chlorinated pesticides between a polydimethylsiloxane (PDMS) phase (100μm thickness) coated on a glass fiber and seawater. An extraction time of 12 days was deemed adequate for equilibrium calibration from kinetic experiments. Two groups of randomly selected fibers divided into three batches (up to nine fibers in each batch) were processed separately with two gas chromatography–mass spectrometry (GC–MS) systems. Matrix effects arising from losses of the analytes to glass container walls and stirring bars were corrected. Relative standard deviations within the same batch were generally smaller than those for the entire group. Furthermore, KfVf (Kf and Vf are the distribution coefficient of an analyte between the polymer-coated fiber and aqueous phase and the fiber volume, respectively) values determined with two GC–MS systems were statistically different. These results indicate the calibrated KfVf values were less affected by the random selection of SPME fibers than by other experimental conditions, and therefore average KfVf values may be used for the same type of commercially available SPME fibers. The relative accuracy of our calibration method was similar to that of a previous study [P. Mayer, W.H.J. Vaes, J.L.M. Hermens, Anal. Chem. 72 (2000) 459] employing different coating thickness and calibration procedure. The present study also obtained a bell-shaped relationship between logKf and logKow (octanol–water partition coefficient) for PCB congeners with the maximum logKf corresponding to logKow∼6.5. This bell-shaped relationship was attributed mainly to steric effects arising from the interplay between the PDMS thickness and molecular sizes of the target analytes.

Developing a consistent model for predicting equilibration in polymeric passive samplers across various HOC classes in sediment pore water

Recalibrating polyparameter linear free energy relationships and reanalyzing mechanisms for partition of nonionic organic compounds to low-density polyethylene passive sampler

Development of A Low-Density Polyethylene-Containing Passive Sampler for Measuring Dissolved Hydrophobic Organic Compounds in Open Waters

Effect of Dissolved Organic Matter on Pre-Equilibrium Passive Sampling: A Predictive QSAR Modeling Study.

In silico prediction of polyethylene-aqueous and air partition coefficients of organic contaminants using linear and nonlinear approaches

Prediction of Polydimethylsiloxane-Water Partition Coefficients Based on the Pp-Lfer and QSAR Models.

Passive sampling of polycyclic aromatic hydrocarbons with low-density polyethylene: Equilibration limitations in aqueous suspensions

Principles of passive sampling for ex situ measurement of hydrophobic organic compounds in sediment: Key considerations on dilution, depletion, and equilibrium

Predicting organic contaminant concentrations in sediment porewater using solid-phase microextraction.

Development of predictive models for silicone rubber-water partition coefficients of hydrophobic organic contaminants.

Sorption Kinetics of Parent and Substituted PAHs for Low-Density Polyethylene (LDPE): Determining Their Partition Coefficients Between LDPE and Water (KLDPE) for Passive Sampling

Versatile in Silico Modeling of Partition Coefficients of Organic Compounds in Polydimethylsiloxane Using Linear and Nonlinear Methods

Experimental verification of a model describing solid phase microextraction (SPME) of freely dissolved organic pollutants in sediment porewater

Equilibrium passive sampling: A novel approach to determine internal tissue concentrations of hydrophobic organic compounds in biota

Versatile Modelling of Polyoxymethylene-Water Partition Coefficients for Hydrophobic Organic Contaminants Using Linear and Nonlinear Approaches.

Passive Sampling Methods for Contaminated Sediments: State of the Science for Organic Contaminants.

Polyethylene-Water and Polydimethylsiloxane-Water Partition Coefficients for Polycyclic Aromatic Hydrocarbons and Polychlorinated Biphenyls: Influence of Polymer Source and Proposed Best Available Values

Calibration of a passive sampler based on stir bar sorptive extraction for the monitoring of hydrophobic organic pollutants in water

Determination of polydimethylsiloxane–seawater distribution coefficients for polychlorinated biphenyls and chlorinated pesticides by solid-phase microextraction and gas chromatography–mass spectrometry

In-situ and ex-situ measurement of hydrophobic organic contaminants in soil air based on passive sampling: PAH exchange kinetics, non-equilibrium correction and comparison with traditional estimations.

Polyethylene-water Partition Coefficients for Polychlorinated Biphenyls: Application of QSPR Predictions Models with Experimental Validation.