Abstract:The search for materials that can withstand the harsh radiation environments of the nuclear industry has become an urgent challenge in the face of ever-increasing demands for nuclear energy. To this end, polycrystalline yttria stabilized zirconia (YSZ) pellets were irradiated with 80 MeV Ag6+ ions to investigate their radiation tolerance against fission fragments. To better simulate a nuclear reactor environment, the irradiations were carried out at the typical nuclear reactor temperature (850 °C). For comparison, irradiations were also performed at room temperature. Grazing incidence X-ray diffraction and Raman spectroscopy measurements reveal degradation in crystallinity for the room temperature irradiated samples. No bulk structural amorphization was however observed, whereas defect clusters were formed as indicated by transmission electron microscopy and supported by thermal spike simulation results. A significant reduction of the irradiation induced defects/damage, i.e., improvement in the radiation tolerance, was seen under irradiation at 850 ºC. This is attributed to the fact that the rapid thermal quenching of the localized hot molten zones (arising from spike in the lattice temperature upon irradiation) is confined to 850 ºC (i.e., attributed to the resistance inflicted on the rapid thermal quenching of the localized hot molten zones by the high temperature of the environment) thereby resulting in the reduction of the defects/damage produced. Our results present strong evidence for the applicability of YSZ as an inert matrix fuel in nuclear reactors, where competitive effects of radiation damage and dynamic thermal healing mechanisms may lead to a strong reduction in the damage production and thus sustain its physical integrity.

Thermal annealing study of swift heavy-ion irradiated zirconia

Exploring metastable phase formation: swift heavy ion effects on partially stabilized zirconia

Thermal recovery of colour centres induced in cubic yttria-stabilized zirconia by charged particle irradiations

Effects of thermal annealing on the evolution of He bubbles in zirconia

One-Chip Solution to Intelligent Robot Control: Implementing Hexapod Subsumption Architecture Using a Contemporary Microprocessor

Swift heavy ion irradiation effects in zirconium and hafnium carbides

Role of temperature in the radiation stability of yttria stabilized zirconia under swift heavy ion irradiation: A study from the perspective of nuclear reactor applications

Radiation-Induced Sharpening in Cr-Coated Zirconium Alloy

Effect of Ion Irradiation on Microstructure and Hardness in Zircaloy-4

Study of Polymorphic Transformation Processes and Their Influence in Polycrystalline ZrO2 Ceramics upon Irradiation with Heavy Ions

Investigating the impact of gamma irradiation and temperature on vacancy formation and recombination in ZrB 2 ceramics using positron annihilation spectroscopy

Structural and thermodynamic evolution of an amorphous SiOC ceramic after swift heavy ion irradiation

Thermal Annealing Effect on Magnetic Properties of Fe Nanoparticles Implanted in Yttrium-Stabilized Zirconia

An in-situ TEM investigation of microstructure evolution in Cr-coated zirconium alloy under heavy ion irradiation: Simultaneous evolution of both Cr coating and Zr-4 matrix

Surface Microstructure and Phase Structure of Zirconia Ceramics under Intense Pulsed Ion Beam Irradiation

Annealing of swift heavy ion tracks in amorphous silicon dioxide

In Situ TEM Study of Microstructure Evolution of Zr-Nb-Fe Alloy Irradiated by 800 keV Kr2+ Ions

The air oxidation of yttrium ion implanted zircaloy-4 at 500°C

Ion Tracks and Nanohillocks Created in Natural Zirconia Irradiated with Swift Heavy Ions

Atomic force microscopy study of the tetragonal to monoclinic transformation behaviour of silica doped yttria-stabilized zirconia

Evolution of structures and internal stress of ZrC-SiC composite under He ion irradiation and post-annealing