Abstract:Boring trepanning association (BTA) deep hole drilling is one of the most important manufacturing techniques to produce a large length-to-diameter ratio hole for industrial applications. In addressing the challenge of excessive surface damage, inefficiency and poor indexing in BTA deep hole drilling, for which there are limited studies reported. The functional behaviour of deep hole machining and the correlation between the machined surface quality, subsurface layer deformation and the machining conditions are investigated in this paper, together with the drilling mechanism. Various parameter combinations are used to produce different samples on which surface roughness and microstructures are studied. Metallurgical characterization is performed on the subsurface regions, followed by qualitative and quantitative mechanical nanohardness investigations. Electron microscopic analysis reveals various surface features such as grooves and plateaus, folding, material flaking that are exclusive to deep hole drilling. It has been found that improved surface integrity in BTA drilling relies on a trade-off among feedrates and speeds. Although considered sample dependent, combination of a feedrate of 28 mm min(-1) and a speed of 630 r min(-1) can produce nearly excellent surface integrity. Grain structure observations over the subsurface reveal three different layered zones including an ultrafine grain structure layer, a transitional grain structure layer and a substrate material layer. A significantly hardened (56% increase) surface layer on cutting-and-burnishing region comparing with the solely cutting region is detected. The subsurface grain features are induced by repeated thermo-mechanical functioning that causes grain refinement and thus materials hardening. The different surface integrities are the result of comprehensive functions of the machining parameters and combined drilling mechanism.

Special Fixture Designed for the Fine Boring of Auto Engine Cylinder

A Multiscale Evaluation of the Surface Integrity in Boring Trepanning Association Deep Hole Drilling

A Robotic Boring System for Intersection Holes in Aircraft Assembly

Special Fixture Design for Automobile air Intake Manifold

An Adaptive Posture Following and Keeping Fixture and Experiments

A New Posture Following and Keeping Fixture for Aircraft Assembly

A Helical Milling and Oval Countersinking End-Effector for Aircraft Assembly

The design of bearing processing technology and fixture

Three-side process special machine tool design for motorcycle engine cylinder

Vibration Analysis and Suppression in Robotic Boring Process

Machining fixture and deformation control of aero-engine thin-walled casing

Two-side process craft of motorbike engine cylinder

The Motorbike Crankcase Hole Series Drill Hinge Composite Process Craft

Machining Fixture for Adaptive CNC Machining Process of Near-Net-shaped Jet Engine Blade

Research on Rapid and Accurate Fixture Design for Non-Intervention Machining of Complex Parts

Methodology to Improve the Cylindricity of Engine Cylinder Bore by Honing

Application of low-melting alloy in the fixture for machining aeronautical thin-walled component

Development of Flexible Fixtures with Incomplete Locating: Connecting Rods Machining Case Study

Application of CNC Boring Machine in Connecting rod Screw Hole Machining

High-power Diesel Engine Crankshaft Cabinet Precision Machining Technology

Research on straightness error detection and quality control of multi-crankshaft bores for large medium speed engine block