Abstract:Aero-engine nacelle acoustic liners are complex curved surface subassemblies with tens of thousands of dense acoustic holes for noise reduction. Traditional robotic drilling systems with a single spindle and conventional teaching programming cannot meet the high-quality and high-efficiency drilling requirements for nacelle acoustic liners. This paper developed a novel robotic multi-spindle drilling system, which integrates standard industrial robots with a multi-spindle drilling end-effector to drill acoustic holes on an acoustic liner. The task planning strategy and offline programming method are investigated for the robotic multi-spindle drilling of the acoustic liner. A dedicated offline programming software capable of quickly generating robotic machining programs has been designed and developed. A precise acoustic hole arrangement applicable to curved drilling zones is demonstrated. The virtual surrogate hole is introduced to target the array layout of the developed end-effector's multiple spindles. A virtual surrogate hole generation method is proposed based on the minimum mutually exclusive set cover and the greedy algorithm. After that, a virtual surrogate hole layout optimization method is developed using an adaptive genetic annealing algorithm. Then, the frame chain is constructed as the kinematic foundation in robotic multi-spindle drilling of a nacelle acoustic liner. The drilling pose planning of the multi-spindle end-effector based on normal vectors and coordinates of acoustic hole points covered by virtual surrogate holes is explored. And a multi-spindle drilling path planning algorithm is developed using the genetic algorithm. To drill the aero-engine nacelle of a large aircraft, an offline programming software for robotic multi-spindle drilling of the nacelle acoustic liner is developed by integrating the methods above. A case study of multi-spindle drilling task planning of a nacelle acoustic liner is carried out. The case study results indicate that, compared to traditional single-spindle robotic drilling systems, the developed multi-spindle drilling system increases drilling efficiency by approximately 347 %. Using the proposed multi-spindle drilling path optimization algorithm, the drilling path has been shortened by 84.8 %. These results validate the effectiveness of the proposed series of drilling task planning methods and the developed offline programming software, which significantly enhance drilling efficiency while meeting the technical requirements for drilling acoustic holes on the acoustic liner.

Application of CNC Boring Machine in Connecting rod Screw Hole Machining

Drilling Task Planning and Offline Programming of a Robotic Multi-Spindle Drilling System for Aero-Engine Nacelle Acoustic Liners

A Robotic Boring System for Intersection Holes in Aircraft Assembly

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

Research on Control Method for Machining Non-Cylinder Pin Hole of Piston

Vibration Analysis and Suppression in Robotic Boring Process

Accelerating Axle Gear-Shift Hole Processing Technique Improvement of Cnc Equipment Headstock

Research on CNC turning technology of threads

The Improvement Method of the Auxiliary Tool Holder of the Inner Diameter Tool of the CNC Lathe in the Internet Era

The Design of the Control System for Equipment of Drilling-Tapping Once Shaping

Extracted Control Approach For Cnc Non-Circular Turning

INNOVATIVE THREAD METHOD THROUGH CYLINDRICAL HOLES

Simulation and Experimental Research on Robot Drilling

Optimization and execution of multiple holes-drilling operations based on STEP-NC

Special Fixture Designed for the Fine Boring of Auto Engine Cylinder

Research on CNC Machining Technology of the Upper Shell of Electro-hydraulic Servo Valve

CNC Machining Technology for the Sliding Block Parts with Special Shape in the Automobile Mold

Mechanism design and process control of micro-EDM for drilling deep hole of bellows

Development of CNC System for Machining of Grooves in Automobile Synchronization Regulators Sleeve

The Present Situation and Development of Small Holes Machining Technology

Design and implementation of an innovative canned cycle for variable pitch thread cutting on CNC milling machines