Abstract:Mixed matrix membranes (MMMs) with one class of fillers always require high loadings to maximize gas permeability. The incompatibility between polymers and high content fillers causes non-selective interfacial voids in the MMMs and poor mechanical properties of MMMs. This work adopts two morphology distinct fillers with chemical similarity to achieve improved gas separation performance of Tröger’ base membranes without sacrificing their mechanical properties. The three-dimensional ZIF-8 nanoparticles are beneficial for membrane gas permeability. The addition of low content ZIF-8 nanosheets can greatly improve H2/CH4 and CO2/CH4 selectivities of the membranes. ZIF-8 particles and ZIF-8 nanosheets with similar chemical properties can mix more homogeneously and disperse well in the polymer matrix with expected hydrogen bonding interaction compared to mixed ZIF-8 and CuBDC nanosheets. Eventually, the resulting dual filler MMMs doped with 4 wt% ZIF-8 nanosheets and 10 wt% ZIF-8 nanoparticles have H2/CH4 ideal selectivity of 60 with H2 permeability of 426 Barrer, which is an increase of 18% and 102% over pure membranes, respectively. Moreover, the membrane has a significantly enhanced CO2/CH4 mixed gas selectivity of 68 at sub-ambient temperature, accompanied by temperature-dependent CO2-induced plasticization behavior. Mixing morphology distinct fillers with chemical similarity is proved to be an effective method to prepare a robust MMM at low filler amounts, and the synergistic effect on gas permeability and selectivity endows these dual filler MMMs with great H2/CH4 and CO2/CH4 separation performance.

Hydrogen-bonded polyamide 6/Zr-MOF mixed matrix membranes for efficient natural gas dehydration

Mixed Matrix Membranes for C2H4/C2H6 Separation Using a Phosphate Anion-Pillared Microporous Material

Enhanced Ethylene Transport of Mixed-Matrix Membranes by Incorporating Anion-Pillared Hybrid Ultramicroporous Materials Via in Situ Growth

Natural gas dehydration membranes prepared by incorporating environmentally friendly metal‐organic framework MIP‐202 into polyetherimide

ZIF-301 MOF/6FDA-DAM polyimide mixed-matrix membranes for CO2/CH4 separation

Optimization of a MOF Blended with Modified Polyimide Membrane for High-Performance Gas Separation

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Vacuum treated amorphous MOF mixed matrix membrane for methane/nitrogen separation

Improving the Selectivity of ZIF-8/Polysulfone-Mixed Matrix Membranes by Polydopamine Modification for H2/CO2 Separation

In-situ growth of UiO-66-NH2 in porous polymeric substrates at room temperature for fabrication of mixed matrix membranes with fast molecular separation performance

Rational Matching Between MOFs and Polymers in Mixed Matrix Membranes for Propylene/propane Separation

Mixed-matrix membranes with soluble porous organic molecular cage for highly efficient C3H6/C3H8 separation

Weakly pressure-dependent molecular sieving of propylene/propane mixtures through mixed matrix membrane with ZIF-8 direct-through channels

Two Morphology Distinct Fillers with Chemical Similarity Incorporated into Tröger’ Base Polymers Towards Enhanced Gas Separation

Highly Propylene-Selective Mixed-Matrix Membranes by in Situ Metal–Organic Framework Formation Using a Polymer-Modification Strategy

Preparation and characterization of small-size amorphous MOF mixed matrix membrane

Hydrophobic-Functionalized Zif-8 Nanoparticles Incorporated Pdms Membranes for High-Selective Separation of Propane/Nitrogen

Thermally Annealed High-Aspect-Ratio ZIF-8 Nanoplates-Incorporated Mixed Matrix Membranes for Improved H2/CO2 Selectivity

Preparation of Amino-Functional UiO-66/PIMs Mixed Matrix Membranes with [bmim][Tf2N] as Regulator for Enhanced Gas Separation

Homoporous hybrid membranes containing metal-organic cages for gas separation

Improving mixed-matrix membrane performance via PMMA grafting from functionalized NH2–UiO-66