Abstract:Capacities deionization (CDI) denitrification technology has attracted considerable attention, and electrode materials with nitrate adsorption properties have become a research hotspot. In this study, a multi cavity carbon microsheets (MCCM-5) was prepared using a hard template method and low-cost nitrated pitch as a carbon source. The results of the electrosorption experiments showed that the material had an excellent capacity of NaNO 3 (45 mg g −1 ). Furthermore, although the actual specific surface area and specific capacitance of MCCM-5 are lower than those of hierarchical porous carbon materials (HPCM-1), MCCM-5 exhibit lower diffusion and charge-transfer resistances, resulting in a better denitrification performance. The adsorption capacity of MCCM-5 for NaNO 3 was twice that HPCM-1 and 11.8 times that of commercial activated carbon, which is superior to the material properties reported thus far. Our analysis indicated that the material combined the advantages of both a layered structure and hierarchical pores. First, the uniformly distributed hierarchical pores in the layered structure enhanced the ion concentration potential. Second, the layered structure provided good ion diffusion channels, thereby increasing the effective adsorption area of the material. DFT calculation shows that the carbon cavity structure enriched in the material shows a stronger adsorption capacity for NO 3 – , which can promote the electron transfer process during NO 3 – adsorption. This study shows that a precise regulation of the carbon material structure can be achieved by adjusting the size of the template material and carbonization conditions to obtain a higher adsorption capacity and provides a new idea for the structural optimization of electrode materials.

Preparation and evaluation of petroleum pitch-based carbon materials with three-dimensional structure containing micron-scale carbon sheets for capacitive deionization anode material

Pitch-based porous carbon via the solid–liquid synergistic oxidation of K 2 FeO 4 for excellent electrocapacitive desalination

Application of pitch-based multi cavity carbon microsheets in capacitive deionization removal of NO 3 –

Preparation of nitrogen-doped hierarchical porous carbon electrodes for high performance capacitive deionization

Three-dimensional electrode design with conductive fibers and ordered macropores for enhanced capacitive deionization performance

Pitch-based 3D tremella-like porous carbon with cavitary structures: Applications in symmetric capacitors and zinc ion capacitors

3D-Printed river-type thick carbon electrodes for docking possible practical application-level capacitive deionization

Nanoarchitectonics of heteroatom-doped hierarchical porous carbon derived from carboxymethyl cellulose carbon aerogel and metal-organic framework for capacitive deionization

Direct synthesis of oxygen-enriched 3D porous carbons via NaCl template derived from oxidized coal tar pitch for excellent cycling stability electric double layer capacitor

Efficient capacitive deionization with 2D/3D heterostructured carbon electrode derived from chitosan and g-C3N4 nanosheets

Laser-induced nitrogen and phosphorus-doped spongy carbon with graphene wings derived from lignin for significantly enhanced capacitance deionization performance

Hierarchical Micro/Mesoporous Carbons Synthesized with a ZnO Template and Petroleum Pitch via a Solvent-Free Process for a High-Performance Supercapacitor

3D Graphene-supported N-doped Hierarchically Porous Carbon for Capacitive Deionization of Saline Water

Nitrogen-enriched micro-mesoporous carbon derived from polymers organic frameworks for high-performance capacitive deionization

Hierarchical nickel cobaltite nanoneedle arrays armored flexible electrospinning carbon nanofibers membrane for electrochemical deionization

Ultrahigh Performance of Novel Capacitive Deionization Electrodes based on A Three-Dimensional Graphene Architecture with Nanopores

Petroleum pitch derived carbon as both cathode and anode materials for advanced potassium-ion hybrid capacitors

GO/auricularia-derived Hierarchical Porous Carbon Used for Capacitive Deionization with High Performance

Boron-nitride-carbon nanosheets with different pore structure and surface properties for capacitive deionization

Electrocapacitive desalination with nitrogen-doped hierarchically structured carbon prepared using a sustainable salt-template method

Use of steam to prepare super active carbon with large pore volume for efficient capacitive deionization