Abstract:The instability of sulfide solid electrolytes to Li anode and high‐voltage LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes limits the cyclic performance of all‐solid‐state lithium battery (ASSLB). Herein, the stability of Li6PS5Cl against Li anode is enhanced by mixing a small amount (0.32 wt%) of CuF2‐LiNO3 (CL) into Li6PS5Cl electrolyte layer to in‐situ form a mixed‐conductive‐lithiophobic and self‐healing LiF‐Li3N‐Cu solid electrolyte interphase (SEI) at Li6PS5Cl‐CL/Li interface. The critical current density (CCD) of Li6PS5Cl‐CuF2‐LiNO3 increases to 1.4 mA cm–2/1.4 mAh cm–2 at room temperature, which is much higher than that of pristine Li6PS5Cl (0.4 mA cm–2/0.4 mAh cm–2) even though mixing 0.32 wt% CL into Li6PS5Cl slightly reduces the ionic conductivity from 2.9 × 10–3 to 1.5 × 10–3 S cm–1. The compatibility of Li6PS5Cl‐CL electrolyte to single‐crystalline NMC811 (S‐NMC811) is further enhanced by adding a small amount (0.02 wt%) of AlF3 into Li6PS5Cl‐CL forming Li6PS5Cl‐CuF2‐LiNO3‐AlF3 (Li6PS5Cl‐CLA) as a cathode electrolyte and by doing Cl– on S‐NMC811 (Cl@S‐NMC811) surface. The Cl@S‐NMC811‐Li6PS5Cl‐CLA|Li6PS5Cl‐CL|Li cells with areal capacity of 2.55 mAh cm‐2 achieve a capacity retention of 69.4% after 100 cycles at 1C (1C = 200 mAh g‐1). Adding a small amount of SEI and cathode/electrolyte interphase (CEI) former into the sulfide electrolytes with minimal reduction (48.3%) of ionic conductivity is an effective method to enhance the performance of ASSLB. A mix‐conductive lithiophobic and self‐healing Li6PS5Cl/Li interphase is in‐situ formed by reduction of solid electrolyte interphase (SEI) former CuF2‐LiNO3 on Li6PS5Cl surface. Similarly, high stable NMC811/Li6PS5Cl interphase is achieved by cathode/electrolyte interphase (CEI) former CuF2‐LiNO3‐AlF3 and Cl– doping on the surface of NMC811. The resultant Cl@S‐NMC811‐Li6PS5Cl‐CuF2‐LiNO3‐AlF3|Li6PS5Cl‐CuF2‐LiNO3|Li cell with areal capacity of 2.55 mAh cm–2 achieves a capacity retention of 69.4% after 100 cycles at 1C.

Sn‐O Dual‐Substituted Chlorine‐Rich Argyrodite Electrolyte with Enhanced Moisture and Electrochemical Stability

Enhancing Moisture and Electrochemical Stability of the Li5.5PS4.5Cl1.5 Electrolyte by Oxygen Doping.

Enhancing Moisture and Electrochemical Stability of the Li 5.5 PS 4.5 Cl 1.5 Electrolyte by Oxygen Doping

Sb and O Dual Doping of Chlorine-rich Lithium Argyrodite to Improve Air Stability and Lithium Compatibility for All-Solid-state Batteries

ZnO Substitution in Argyrodite Li5.5+3xZnxP1‐xOxS4.5‐xBr1.5 Electrolyte with Enhanced Interface Performance for All‐Solid‐State Battery

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Enhancing the electrochemical performances of Li7P3S11 electrolyte through P2O5 substitution for all-solid-state lithium battery

Enhanced Air and Electrochemical Stability of Li 7 P 3 S 11 –Based Solid Electrolytes Enabled by Aliovalent Substitution of SnO 2

Improved Interfacial Compatibility and Ionic Conductivity of SnI4 Co-doping Li-Argyrodite Sulfide Electrolyte for All-Solid-State Lithium Batteries

Sn-Substituted Argyrodite Li6PS5Cl Solid Electrolyte for Improving Interfacial and Atmospheric Stability

Yttrium stabilized argyrodite solid electrolyte with enhanced ionic conductivity and interfacial stability for all-solid-state batteries

Enabling Argyrodite Sulfides as Superb Solid‐State Electrolyte with Remarkable Interfacial Stability Against Electrodes

High Air Stability and Excellent Li Metal Compatibility of Argyrodite‐Based Electrolyte Enabling Superior All‐Solid‐State Li Metal Batteries

Argyrodite-Li 6 PS 5 Cl/Polymer-based Highly Conductive Composite Electrolyte for All-Solid-State Batteries

High performance P-based argyrodite sulfide electrolytes enabled by Sb-based argyrodite doping for all-solid-state lithium metal batteries

Enhanced Air and Electrochemical Stability of Li7P3S11–Based Solid Electrolytes Enabled by Aliovalent Substitution of SnO2

Dendrite-Free Li5.5PS4.5Cl1.5-Based All-Solid-State Lithium Battery Enabled by Grain Boundary Electronic Insulation Strategy through In Situ Polymer Encapsulation

An Effective Strategy to Enable Argyrodite Sulfides as Superb Solid-State Electrolytes: Safeguarding Remarkable Ionic Conductivity and Interfacial Stability with Electrodes

F and N Rich Solid Electrolyte for Stable All‐Solid‐State Battery

Tailoring Electrolyte Distributions to Enable High‐performance Li <sub>3</sub> PS <sub>4</sub> ‐based All‐solid‐state Batteries under Different Operating Temperatures

A Versatile Sn‐Substituted Argyrodite Sulfide Electrolyte for All‐Solid‐State Li Metal Batteries