Abstract:Production of fibers from nonthermoplastic polymers, such as chitosan, usually requires dissolution with subsequent fiber formation, for instance, via coagulation. Good fiber-forming properties enable simultaneous spinning of multiple fibers into a yarn, which is one of the prerequisites for process scalability. Here, we report a multifilament wet-spinning process that eliminates the use of such volatile organic compounds as methanol and acetone, enhances fiber formation, and allows producing continuous well-separated chitosan fibers after drying. This is achieved by (i) solidification of the extruded solution by alkali and sodium acetate in the coagulation bath and (ii) further stabilization of the fibers by adsorbing the anionic surfactant, sodium dodecyl sulfate. The obtained fibers have a circular cross section and smooth surface. We demonstrate that it is possible to increase fiber breaking tenacity and Young's modulus by applying stretching (draw ratios up to 1.77) or by incorporating cellulose nanofibrils (CNFs, up to 4 wt % based on chitosan) in the spinning solutions. However, the limitation of increased viscosity when adding CNF is needed to be overcome for possible higher reinforcement effects. We demonstrate that fiber breaking tenacity, Young's modulus, and elongation at break can be enhanced even further by increasing the spin dope temperature from 22 to 60 °C, with simultaneously increasing the spin dope solid content to keep the same dope viscosity. The fibers with a maximum breaking tenacity of ca. 10 cN/tex at an elongation at break of ca. 7.5% were obtained.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsapm.0c00562?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsapm.0c00562</a>.Chemical structures of CNF and CNC, microscopy images of chitosan solutions and fibers, rheological data, SEM images, and EDS spectra (<a class="ext-link" href="/doi/suppl/10.1021/acsapm.0c00562/suppl_file/ap0c00562_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Pure chitosan multifilament yarns made using a semi‐industrial pilot scale wet‐spinning process with ionic liquids

Pure Chitosan-Based Fibers Manufactured by a Wet Spinning Lab-Scale Process Using Ionic Liquids

Continuous Pilot‐Scale Wet‐Spinning of Biocompatible Chitin/Chitosan Multifilaments from an Aqueous KOH/Urea Solution

Wet Spinning of Chitosan Fibers: Effect of Sodium Dodecyl Sulfate Adsorption and Enhanced Dope Temperature

Aqueous-Based Coaxial Electrospinning of Genetically Engineered Silk Elastin Core-Shell Nanofibers

From Spinning Process to Physical Properties

Assembly of porous filaments by interfacial complexation of nanochitin-based Pickering emulsion and seaweed alginate

Emulsion Electrospinning as an Approach to Fabricate PLGA/Chitosan Nanofibers for Biomedical Applications

Effect of Wetting Pretreatment on Structure and Properties of Plasma Induced Chitosan Grafted Wool Fabric

Fabrication Of Chitosan-Blend-P(Lla-Cl) Nanofibers By Electrospinning

Preparation and Characterization of Ultrafine Chitosan/PLA Fibers Scaffolds

High-performance cellulosic filament fibers prepared via dry-jet wet spinning from ionic liquids

Preparation of alginate–chitosan fibers with potential biomedical applications

Wet spinning of fibers made of chitosan and chitin nanofibrils

A review on chitin dissolution as preparation for electrospinning application

Effect of Fiber Length and Blending Method on the Tensile Properties of Ring Spun Chitosan–cotton Blend Yarns

BINARY CHITOSAN/QUATERNIZED CHITOSAN VIA ELECTROSPINNING. MORPHOLOGY AND ANTIMICROBIAL ACTIVITY

High strength chitin nanocrystal/alginate filament prepared by wet-spinning in "green" coagulating bath

Super‐Strong and Super‐Stiff Chitosan Filaments with Highly Ordered Hierarchical Structure

Preparation and Characterization of Chitosan/Poly(Vinyl Alcohol) Blend Fibers.