Abstract:Mechanical properties of high-entropy alloys (HEAs) with the face-centered cubic (fcc) structure strongly depend on their initial grain orientations. However, the orientation-dependent mechanical responses and the underlying plastic flow mechanisms of such alloys are not yet well understood. Here, deformation of the equiatomic FeMnCoCrNi HEA with various initial orientations under uniaxial tensile testing has been studied by using atomistic simulations, showing the results consistent with the recent experiments on fcc HEAs. The quantitative analysis of the activated deformation modes shows that the initiation of stacking faults is the main plastic deformation mechanism for the crystals initially oriented with [001], [111], and [112], and the total dislocation densities in these crystals are higher than that with the [110] and [123] orientations. Stacking faults, twinning, and hcp-martensitic transformation jointly promote the plastic deformation of the [110] orientation, and twinning in this crystal is more significant than that with other orientations. Deformation in the crystal oriented with [123] is dominated by the hcp-martensite transformation. Comparison of the mechanical behaviors in the FeMnCoCrNi alloy and the conventional materials, i.e. Cu and Fe50Ni50, has shown that dislocation slip tends to be activated more readily in the HEA. This is attributed to the larger lattice distortion in the HEA than the low-entropy materials, leading to the lower critical stress for dislocation nucleation and elastic–plastic transition in the former. In addition, the FeMnCoCrNi HEA with the larger lattice distortion leads to an enhanced capacity of storing dislocations. However, for the [001]-oriented HEA in which dislocation slip and stacking fault are the dominant deformation mechanisms, the limited deformation modes activated are insufficient to improve the work hardening ability of the material.

Fatigue crack growth behavior in CoCrFeMnNi high entropy alloy with harmonic structure topology

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Microstructure relevant fatigue short crack propagation behavior of Al 0.3 CoCrFeNi high entropy alloy: in-situ SEM study

Enhanced corrosion resistance of CoCrFeMnNi high entropy alloy using heterogeneous structure design

Microstructure sensitivity of the low cycle fatigue crack initiation mechanisms for the Al 0.3 CoCrFeNi high entropy alloy: in-situ SEM study and crystal plasticity simulation

Ultra-long life fatigue behavior of a high-entropy alloy

Microstructure and Mechanical Properties of Face‐Centered‐Cubic‐Based Cr‐Free Equiatomic High‐Entropy Alloys

Developing harmonic structure in CoCrFeMnNi high entropy alloy to enhance mechanical properties via powder metallurgy approach

Investigation on the Fatigue Crack Propagation of Medium-Entropy Alloys with Heterogeneous Microstructures

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Enhancing the fatigue property of high entropy alloy by regulating characteristics of grains and precipitates

Fatigue Behaviour and Crack Initiation in CoCrFeNiMn High-Entropy Alloy Processed by Powder Metallurgy

Fatigue Behavior of Al0.5cocrcufeni High Entropy Alloys

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Mechanical properties and fracture mechanism of as-cast MnFeCoCuNi high-entropy alloys

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Microstructure Evolution and Mechanical Property of Directionally Solidified CoCrFeMnNi High Entropy Alloy

Orientation-Dependent Mechanical Responses and Plastic Deformation Mechanisms of FeMnCoCrNi High-entropy Alloy: A Molecular Dynamics Study

Microstructural evolution and mechanical properties of FeCoCrNiCu high entropy alloys: a microstructure-based constitutive model and a molecular dynamics simulation study

Deformation mechanisms of CoCrFeMnNi high-entropy alloy under low-cycle-fatigue loading

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment