Abstract:Polyvinylidene fluoride (PVDF) porous membranes have been widely used as the filtration and separation industry. Herein, novel microfiltration membranes based on 1-vinyl-3-butylimidazolium chloride ([VBIm][Cl]) grafted PVDF (PVDF-g-[VBIm][Cl]) were prepared via the non-solvent induced phase separation method. The chemical composition and microstructure of PVDF-g-[VBIm][Cl] membranes were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, Scanning electron microscopy and Water contact angle measurements. The results showed that an increasing in [VBIm][Cl] grafting content leads to the increasing hydrophilicity and wetting capacity of the PVDF-g-[VBIm][Cl] porous membranes. The anti-biofouling properties of membranes were evaluated by measuring the water flux before and after Bovine serum albumin solution treatment. It was found that the modified membranes presented a good anti-biofouling property. The degree of irreversible flux loss caused by protein adsorption dramatically reduced from 42.1% to 2.9% compared with the pristine hydrophobic PVDF membranes. Meanwhile, these PVDF-g-[VBIm][Cl] membranes also exhibited excellent bactericidal properties against both gram-positive bacteria Staphylococcus saureus and gram-negative bacteria Escherichia coli, while PVDF membranes did not show any antibacterial activity. The vitro biocompatibility of the modified membranes was studied by hemolysis analysis, the platelet adhesion observation, thromboelastography assay and cytotoxicity assay. It was found that the incorporation of [VBIm][Cl] into PVDF membranes has less effect on the hemolysis and cytotoxicity of PVDF membranes. Furthermore, both hydrophilicity and charges of the membrane surface played important role in the adhesion and activation of platelet cells, which consequently affected the clotting process of whole blood. The membrane with appropriate [VBIm][Cl] grafting ratio (2.94 wt.%) exhibited good hemocompatibility with less blood coagulation effect. As an ultrafiltration membrane, PVDF-g-[VBIm][Cl] membranes have potential applications in the biomedical field due to the improved antibacterial property and biocompatibility.

Preparation of PVDF-g-PSBA Membrane by Homogeneous Solution Gamma-Ray Co-Irradiation and Its Antibacterial Effects

Surface modification of PVDF porous membranes by electron irradiation

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Preparation and Characterization of Poly(vinyl Chloride)‐graft‐acrylic Acid Membrane by Electron Beam

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Preparation of PES-g-PMBA Filtration Membrane by Gamma-ray Irradiation and Its Membrane Performance for the Treatment of BSA Aqueous Solution

Poly(vinylidene Fluoride) with Grafted Poly(ethylene Glycol) Side Chains Via the RAFT-Mediated Process and Pore Size Control of the Copolymer Membranes

Influences of gamma-ray irradiation on PVDF membrane behavior: An experimental study based on simulation and numerical analysis

The Radiation Graft Copolymerization of Allylmethacrylate to Polyvinylidene Fluoride to Prepare of Membrane and Its Affordability for Domestic Wastewater Treatment

The impact of gamma-irradiation on physical properties and membrane distillation performance of PTFE and PVDF hollow fiber membrane

Surface modification of a PVDF membrane by co‐grafting hydroxyl and zwitterionic polymers to enhance wettability and antifouling property

Anti-biofouling microfiltration membranes based on 1-vinyl-3-butylimidazolium chloride grafted PVDF with improved bactericidal properties and vitro biocompatibility

Preparation of antimicrobial PVDF and EVOH membranes by grafting quaternary ammonium compounds

Preparation Of Sulfobetaine-Grafted Pvdf Hollow Fiber Membranes With A Stably Anti-Protein-Fouling Performance

Surface Modification of Poly(vinylidene fluoride) Ultrafiltration Membranes with Chitosan for Anti-Fouling and Antibacterial Performance

Fabrication of Hydrophilic and Antibacterial Poly(vinylidene Fluoride) Based Separation Membranes by a Novel Strategy Combining Radiation Grafting of Poly(acrylic Acid) (PAA) and Electroless Nickel Plating

A PEGylated PVDF Antifouling Membrane Prepared by Grafting of Methoxypolyethylene Glycol Acrylate in Gama-Irradiated Homogeneous Solution

Influence of Low Dose Gamma-Ray Irradiation on the Performance and Degradation of Pvdf Ultrafiltration Membrane

Preparation of proton exchange membrane by radiation-induced grafting of PVDF film

Surface modification of polyvinylidene fluoride (PVDF) membrane via radiation grafting: novel mechanisms underlying the interesting enhanced membrane performance

Antibacterial performance of the PVDF membranes doped with Ag photodeposited TiO2 particles