Abstract:Multijunction solar cells offer high potential to improve the efficiency beyond the single-junction limit. The record power conversion efficiency of monolithic all-perovskite tandem solar cells (26.4%) has now surpassed that of the single-junction counterparts (25.7%). The two-terminal tandem architectures, in most cases, require a “matched” current between the top and bottom subcells for an optimal tandem performance. In some cases, where the two subcells have distinct fill factors, a “power matching” strategy shows better performance than “current matching”. In this study, we prove that optimal performance of monolithic all-perovskite tandem solar cells is obtained when the top subcell has a higher short-circuit current than the bottom one. This is attributed to both optical and electrical properties of the all-perovskite tandem cells. We also investigate the optimal tandem configurations under real-world conditions, where solar spectra, angle of incidence, and cell temperature are different from the standard test conditions. We find that the top subcell shifts to thinner optimal thickness under blue-rich solar spectra. We also observe that the bottom subcell shifts to thicker optimal thickness due to larger angle of incidence under real-world conditions. Since two perovskite subcells have similar temperature coefficients, the real-world cell temperatures have little impact the optimal tandem configurations, but will affect the annual energy yield. We further obtain the real-world optimized tandem configurations, which can increase the annual energy yield compared with the one optimized under standard test conditions. The current-mismatching losses under real-world conditions can be reduced by optimized configurations, and even be turned into energy gains in certain cases. This finding enhances the confidence in promoting high-efficient, customizable tandem solar cells for different regions and installation methods.

Design of Efficient Inverted NiOX‐Based Three‐Terminal Back‐Contact All Perovskite Tandem Solar Cells

All-perovskite tandem solar cells with 3D/3D bilayer perovskite heterojunction

Theoretical Analysis of All‐Inorganic Wide Bandgap Perovskite /Sn‐Based Narrow Bandgap Perovskite Tandem Solar Cells

Optical Design of Monolithic Two-Terminal Perovskite/Si Tandem Solar Cells for Efficient Photon Management

Efficient All‐Perovskite Tandem Solar Cells with Low‐Optical‐Loss Carbazolyl Interconnecting Layers

Design and simulation of three-junction all perovskite tandem solar cells: A path to enhanced photovoltaic performance

Current or Power Matching? A Third Option for Monolithic All-Perovskite Tandem Solar Cells

Efficient and Thermally Stable All‐Perovskite Tandem Solar Cells Using All‐FA Narrow‐Bandgap Perovskite and Metal‐oxide‐based Tunnel Junction

Monolithic All‐Perovskite Tandem Solar Cells with Minimized Optical and Energetic Losses

Low-bandgap mixed tin–lead iodide perovskite absorbers with long carrier lifetimes for all-perovskite tandem solar cells

All-perovskite Tandem Solar Cells with 24.2% Certified Efficiency and Area over 1 Cm2using Surface-Anchoring Zwitterionic Antioxidant

Homogenized contact in all-perovskite tandems using tailored 2D perovskite

All-perovskite tandem solar cells with improved grain surface passivation

All-perovskite tandem solar cells with 24.2% certified efficiency and area over 1 cm2 using surface-anchoring zwitterionic antioxidant

Simulating High‐Efficiency, Lead‐Free Inorganic‐Organic Perovskite Tandem Solar Cells with over 46% Efficiency

Toward High-Performance HTL-Free All-Perovskite Tandem Solar Cells: SCAPS Simulation

All‐In‐One Additive Enabled Efficient and Stable Narrow‐Bandgap Perovskites for Monolithic All‐Perovskite Tandem Solar Cells

Dual‐Site Anchors Enabling Vertical Molecular Orientation for Efficient All‐Perovskite Tandem Solar Cells

Monolithic Perovskite/si Tandem Solar Cells Exceeding 22% Efficiency Via Optimizing Top Cell Absorber

Recent Advances of Monolithic All‐Perovskite Tandem Solar Cells: From Materials to Devices

Device Simulation of Quasi-Two-dimensional Perovskite/silicon Tandem Solar Cells Towards 30%-Efficiency