Abstract:In this article, 3-D vector-based model predictive current control (MPCC) for the open-end winding permanent magnet synchronous generator (OEW-PMSG) system driven by a dual inverter with a common dc bus is proposed to suppress the zero-sequence current. First, the 3-D voltage vector distribution of this system is analyzed and their zero-sequence voltages are investigated. Then, in order to reduce the computation burden of prediction control caused by vector enumeration, an improved current prediction control is developed, in which candidate voltage vectors for the dual inverter are determined according to the position of the zero-sequence reference voltage vector and the sector location of the $alpha beta $ -axis reference voltage vector. Moreover, to further improve the steady-state control performance of the whole generation system, a separate vector-selection method for the dual inverter is proposed. In this method, the first inverter applies one voltage vector in a control period and the voltage vector of the second inverter is synthesized by two vectors and selected in 3-D space. Finally, experiments are carried out to validate proposed methods, and the comparison experiments indicate that the proposed method has better control performance compared to conventional methods.

What problem does this paper attempt to address?

This paper aims to solve the problem of suppressing zero - sequence current in the open - end winding permanent magnet synchronous generator (OEW - PMSG) system. Specifically, the paper proposes a three - dimensional vector - based model predictive current control (MPCC) method for the OEW - PMSG system driven by dual inverters and with a common DC bus, in order to effectively suppress the zero - sequence current. The existence of zero - sequence current will lead to an increase in additional losses in the system, aggravated torque ripple, and a decline in system efficiency. Therefore, suppressing zero - sequence current is crucial for improving the overall performance of the system. The main contributions of the paper are as follows: 1. **Three - dimensional voltage vector analysis**: First, a detailed analysis of the three - dimensional voltage vector distribution in the system was carried out, and the zero - sequence voltages generated by these vectors were studied. 2. **Improved current predictive control**: In order to reduce the computational burden caused by vector enumeration in predictive control, an improved current predictive control method was developed. This method determines the candidate voltage vectors of the dual inverters according to the position of the zero - sequence reference voltage vector and the sector where the αβ - axis reference voltage vector is located. 3. **Separate vector selection method**: To further improve the steady - state control performance of the entire power generation system, a separate vector selection method for dual inverters was proposed. In this method, the first inverter applies one voltage vector within one control cycle, while the voltage vector of the second inverter is synthesized by two vectors and selected in three - dimensional space. 4. **Experimental verification**: Finally, the effectiveness of the proposed method was verified through experiments. The experimental results show that, compared with the traditional method, the proposed method has better control performance. Through the above methods, the paper has successfully solved the problem of suppressing zero - sequence current in the OEW - PMSG system and improved the overall performance of the system.

3-D Vector-Based Model Predictive Current Control for Open-End Winding PMSG System With Zero-Sequence Current Suppression

Zero Sequence Current Suppression Strategy for Open Winding PMSG Fed by Semi-controlled Converter

Synthetic Vectors-Based Predictive Control of Dual Three-Phase PMSMs for Current Harmonics Mitigation Considering Average Deception Effect

Zero-Sequence Current Suppression Strategy of Open-Winding PMSG System With Common DC Bus Based on Zero Vector Redistribution

Model Predictive Control of the Open-winding PMSG System Based on Three-Dimensional Reference Voltage-Vector

Dual-Vector Predictive Current Control of Open-End Winding PMSM with Zero-Sequence Current Hysteresis Control

Current Zero-Crossing Duration Reduction of a Semicontrolled Open-Winding PMSG System Based on Third Harmonic Current Injection

Hybrid Vector Model Predictive Control for Open-winding PMSM Drives

Model Predictive Control Of Semi-Controllable Open Winding Pmsg Based On Three Level Npc Converter

Model Predictive Current Control for an Open-Winding PMSM System with a Common DC Bus in 3-D Space

Investigation and Suppression of Current Zero Crossing Phenomenon for a Semicontrolled Open-Winding PMSG System

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Improved Three-Vector Based Dead-Beat Model Predictive Direct Power Control Strategy for Grid-Connected Inverters.

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

Bilateral Four-Segment-Mode Model Predictive Control for Open-Winding PMSM Drives

Virtual Voltage Vector-Based Sequential Model-Free Predictive Control for Multiparalleled NPC Inverters

Model Predictive Current Control for Dual Three-Phase Permanent Magnet Synchronous Motor with Common-Mode Voltage Suppression

Model-Free Predictive Current Control of a Multilevel Cascaded H-bridge inverter for Photovoltaic Systems

Sensorless Control of Pmsg Based on Dual Two-Level Inverter Open Winding Configuration for Wind Turbines

Virtual Voltage Vector Based Model Predictive Control for a Nine-Phase Open-End Winding PMSM With a Common DC Bus

A Zero-sequence Current Suppression strategy for Five-phase Open-end Winding PMSM with Vector Proportional Integral Controller