Abstract:A new facility for microdiffraction strain measurements and microfluorescence mapping has been built on beamline 12.3.2 at the advanced light source of the Lawrence Berkeley National Laboratory. This beamline benefits from the hard x-radiation generated by a 6 T superconducting bending magnet (superbend). This provides a hard x-ray spectrum from 5 to 22 keV and a flux within a 1 microm spot of approximately 5x10(9) photons/s (0.1% bandwidth at 8 keV). The radiation is relayed from the superbend source to a focus in the experimental hutch by a toroidal mirror. The focus spot is tailored by two pairs of adjustable slits, which serve as secondary source point. Inside the lead hutch, a pair of Kirkpatrick-Baez (KB) mirrors placed in a vacuum tank refocuses the secondary slit source onto the sample position. A new KB-bending mechanism with active temperature stabilization allows for more reproducible and stable mirror bending and thus mirror focusing. Focus spots around 1 microm are routinely achieved and allow a variety of experiments, which have in common the need of spatial resolution. The effective spatial resolution (approximately 0.2 microm) is limited by a convolution of beam size, scan-stage resolution, and stage stability. A four-bounce monochromator consisting of two channel-cut Si(111) crystals placed between the secondary source and KB-mirrors allows for easy changes between white-beam and monochromatic experiments while maintaining a fixed beam position. High resolution stage scans are performed while recording a fluorescence emission signal or an x-ray diffraction signal coming from either a monochromatic or a white focused beam. The former allows for elemental mapping, whereas the latter is used to produce two-dimensional maps of crystal-phases, -orientation, -texture, and -strain/stress. Typically achieved strain resolution is in the order of 5x10(-5) strain units. Accurate sample positioning in the x-ray focus spot is achieved with a commercial laser-triangulation unit. A Si-drift detector serves as a high-energy-resolution (approximately 150 eV full width at half maximum) fluorescence detector. Fluorescence scans can be collected in continuous scan mode with up to 300 pixels/s scan speed. A charge coupled device area detector is utilized as diffraction detector. Diffraction can be performed in reflecting or transmitting geometry. Diffraction data are processed using XMAS, an in-house written software package for Laue and monochromatic microdiffraction analysis.

Biopharmaceutical beamline TLS 15A1 for macromolecular crystallography at the National Synchrotron Radiation Research Center

BL02U1: the Relocated Macromolecular Crystallography Beamline at the Shanghai Synchrotron Radiation Facility

Performance of the Atomic and Molecular Physics Beamline at the National Synchrotron Radiation Laboratory.

Phase I Beamlines at Taiwan Photon Source

The Bio Safety Level-2 Macromolecular Crystallography Beamline (BL10U2) at the Shanghai Synchrotron Radiation Facility

Design and Commission of A Superconducting Wiggler X-Ray Beamline for Advanced Materials Investigation at the National Synchrotron Radiation Research Center

Design and performance of U7B beamline and X-ray diffraction and scattering station at NSRL and its preliminary experiments in protein crystallography

A new experimental station for microbeam X‐ray scattering at the SSRF BL10U1 beamline

BL19U2: Small-angle X-ray scattering beamline for biological macromolecules in solution at SSRF

A Dedicated Superbend X-Ray Microdiffraction Beamline for Materials, Geo-, and Environmental Sciences at the Advanced Light Source

Biological Small-Angle X-Ray Scattering Facility at the Stanford Synchrotron Radiation Laboratory

A SMALL-ANGLE X-RAY SCATTERING STATION AT BEIJING SYNCHROTRON RADIATION FACILITY

Time-resolved crystallography of proteins at the femto second x-ray plasma source in eli beamlines

In Situx-Ray Data Collection and Structure Phasing of Protein Crystals at Structural Biology Center 19-ID

A 1.2 to 6 Kev Soft X-ray Beamline at Beijing Synchrotron Radiation Facility

X-ray microscopy instrumentation developments at NSLS-II: recent progress and future directions

Crystallographic Data Collection Using a Multilayer Monochromator on an Undulator Beamline at the Shanghai Synchrotron Radiation Facility

[SPring-8 structural biology beamline]

In situ serial crystallography facilitates 96-well plate structural analysis at low symmetry

A guide to sample delivery systems for serial crystallography.

Fixed-Target Serial Synchrotron Crystallography Using Nylon Mesh and Enclosed Film-Based Sample Holder