Abstract:A precursor CuO/ZnO/Al2O3 catalyst for methanol synthesis has been prepared at room temperature by introducing a ternary salt solution into the excess of sodium carbonate solution following the reverse co-precipitation method. The catalyst was tested for the synthesis of methanol from synthesis gas. The composition (vol. %) has been presented: CO, 22; CO2, 5.8; N2, 5.5; H2, balance. The methanol productivity was recorded to be 2.7 kg kgcat–1 h–1 at a temperature of 260 °С, a pressure of 3 MPa, and a space velocity of 61,700 l (kgcat)–1 h–1. The possibility of regenerating the activity of a catalyst subjected to conditions of artificial aging (overheating in a syngas environment) has been tested: approximately 92% of the initial activity could be restored. Physicochemical studies were conducted using the thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), the scanning electron microscopy (SEM), and the X-ray diffraction (XRD) techniques using the Cu, Zn, and Al oxides obtained following the co-precipitation method. X-ray studies revealed that an amorphous phase was obtained from the Al oxide that was synthesized following both the direct and reverse co-precipitation methods. The calcination temperature was 300 °C. Individual oxides of Cu and Zn obtained following the reverse co-precipitation method form crystalline phases when calcined at 300 °C. When all three ingredients are present, calcination of the sample at 300 °C helps obtain an X-ray amorphous structure of the catalyst characterized by a high specific surface area. High-temperature carbonates are formed from samples prepared using a ternary mixture of nitrate salts when these are calcined at 300 °C.

Methanol Synthesis Using Copper Catalysts Supported on CeO2−Al2O3 Mixed Oxide

Methanol Synthesis from CO 2 and H 2 over Pd/ZnO/Al 2 O 3 : Catalyst Structure Dependence of Methanol Selectivity

Advances in copper-based catalyst for the methanol synthesis from CO2 hydrogenation

Methanol Synthesis from CO2 Hydrogenation over CuZnCeTi Mixed Oxide Catalysts

Oxidative Steam Reforming of Methanol over Cu-Based Catalysts

Preparation and properties of cerium modified Cu based catalysts for methanol synthesis

Mechanism and Nature of Active Sites for Methanol Synthesis from CO/CO 2 on Cu/CeO 2

Active Sites and Structure–Activity Relationships of Copper-Based Catalysts for Carbon Dioxide Hydrogenation to Methanol

CO2 Hydrogenation to Methanol over Bimetallic Pd-Cu Catalysts Supported on TiO2-CeO2 and TiO2-ZrO2

Low-temperature methanol synthesis catalyzed over Cu/γ-Al2O3–TiO2 for CO2 hydrogenation

Supported Pd-Cu bimetallic nanoparticles that have high activity for the electrochemical oxidation of methanol.

Effect of the nature of copper species on methanol synthesis from CO2 hydrogenation reaction over CuO/Ce0.4Zr0.6O2 catalyst

PdCu supported on dendritic mesoporous CexZr1-xO2 as superior catalysts to boost CO2 hydrogenation to methanol

Low temperature methanol synthesis in alcohol solvent over copper-based catalyst

Preparing methods of CuO/ZnO/Al2O3 catalysts for the synthesis of methanol

Low-Temperature Methanol Synthesis Catalyzed Over Cu/Gamma-Al2o3-Tio2 For Co2 Hydrogenation

Activity of bimetallic PdIn/CeO2 catalysts tuned by thermal reduction for improving methanol synthesis via CO2 hydrogenation

Alcohol Solvent Assisted Synthesis of Metallic and Metal Oxide Catalysts: As-Prepared Cu/ZnO/Al 2 O 3 Catalysts for Low-Temperature Methanol Synthesis with an Ultrahigh Yield

Effective Cu/ZnO/Al2O3 Catalyst for Methanol Production: Synthesis, Activation, Catalytic Performance, and Regeneration

Kinetics of Methanol Synthesis from Carbon Dioxide Hydrogenation over Copper–Zinc Oxide Catalysts