Abstract:Greenhouse effect has become a huge challenge for the sustainable development of the world. It is well known that CO2 is the major greenhouse gas that contributes to global warming more than 60%, resulting in the urgent demand to reduce the CO2 emission. Currently, post-combustion CO2 capture is a promising choice in the near-to middle-term, since it can be retrofitted to the existing power plants. Chemical absorption is generally recognized as the most mature technology for industrial application, and monoethanolamine (MEA) is the most widely used absorbent. Conventional MEA absorption process suffers from high energy consumption due to its immense steam consumption in the regeneration process, leading to the extremely high operating cost for industrial application. To reduce the high cost of chemical absorption, researches tried to improve the typical CO2 absorption process in several aspects like exploring new absorbents, improving absorbing equipment and strengthening the process. Numerous studies have been carried out on the improvement of MEA absorption in packed columns and a vast number of meaningful conclusions have been obtained. But it is not yet fully developed for application and may not be economically competitive. Packed columns generally suffer from high gas-phase pressure drop, liquid channeling and flooding, deposition onto the packing material and so on. To avoid these problems, researchers proposed a type of spray towers with no solid packing material inside and the absorbing solution is sprayed as fine droplets for absorption. Since the spray towers are empty columns, there will be a lower pressure drop for the gas flow and a wider range of gas to liquid loading ratios compared to the traditional packed columns. In addition, with the simpler structure compared with typical packed columns, the spray towers cost less for construction and maintenance. The application of spray towers for CO2 capture is a development trend in recent years. However, most of the previous jobs were conducted in a cylindrical tower by using a single spray nozzle, whose configuration and performance is not good enough for industrial application. Furthermore,

Gas and slurry flow behaviors in a CO2‐mineralization spray tower reactor

Influence of Slurry Velocity and Concentration Distributions on Fischer-Tropsch Synthesis in Slurry Bubble Column Reactor

Flow Patterns of Multi-Soil-layering Systems

Realization and Control of Multiple Temperature Zones in Liquid‐containing Gas–solid Fluidized Bed Reactor

CFD investigation of post-combustion CO 2 capture using an industrial spray tower: Regulation effects of spray schemes

Hydrodynamic Mechanism Study of the Diameter-Varying Spray Tower with Atomization Impinging Spray

Experimental and Numerical Study on CO2 Absorption Mass Transfer Enhancement for a Diameter-Varying Spray Tower

Evaluation of a Membrane-Sparged Helical Tubular Photobioreactor for Carbon Dioxide Biofixation by Chlorella Vulgaris

Experimental study of CO 2 absorption in a diameter-varying spray tower

Performance of CO2 Absorption in a Diameter-Varying Spray Tower

Experimental Study of Gas-liquid Mass Transfer Characteristics of a Liquid-curtain Type Desulfuration Absorption Tower

Gas-solid Two Phase Flow in Internally Circulating Multistage Spouted Desulfurization Towers

Experimental Study on Volumetric Mass Transfer Coefficients for CO2 Removel from Polluted Air into Aqueous Solution of NaOH in a Rotating-stream-tray Scrubber

A Scale-Up Strategy for Low-Temperature Methanol Synthesis in a Circulating Slurry Bubble Reactor

Integrated high-gravity process for HCl removal and CO 2 capture using carbide slag slurry in a rotor-stator reactor: Experimental and modeling studies

Simulation Design and Optimization of Reactors for Carbon Dioxide Mineralization

Numerical Simulations of CO2 Absorption by MgO-based Sorbent in a Gas–solid Fluidized Bed

Study of the Desulfuration Efficiency and Mass Transfer Performance of a Gas-liquid Double-flow-path Flue Gas Desulfuration Tower

Hydrodynamics and mass transfer coefficient in three-phase air-lift reactors containing activated sludge

Slurry Reactors For Gas-To-Liquid Processes: A Review

Experimental Study on Desulfurization Efficiency and Gas–liquid Mass Transfer in a New Liquid-Screen Desulfurization System