Abstract:X-ray diffraction/scattering computed tomography (XRS-CT) was used to create two-dimensional images, with 20 μm resolution, of passivated Co/TiO2/Mn Fischer-Tropsch catalyst extrudates postreaction after 300 h on stream under industrially relevant conditions. This combination of scattering techniques provided insights into both the spatial variation of the different cobalt phases and the influence that increasing Mn loading has on this. It also demonstrated the presence of a wax coating throughout the extrudate and its capacity to preserve the Co/Mn species in their state in the reactor. Correlating these findings with catalytic performance highlights the crucial phases and active sites within Fischer-Tropsch catalysts required for understanding the tunability of the product distribution between saturated hydrocarbons or oxygenate and olefin products. In particular, a Mn loading of 3 wt % led to an optimum equilibrium between the amount of hexagonal close-packed Co and Co2C phases resulting in maximum oxygenate selectivity. XRS-CT revealed Co2C to be located on the extrudates' periphery, while metallic Co phases were more prevalent toward the center, possibly due to a lower [CO] ratio there. Reduction at 450 °C of a 10 wt % Mn sample resulted in MnTiO3 formation, which inhibited carbide formation and alcohol selectivity. It is suggested that small MnO particles promote Co carburization by decreasing the CO dissociation barrier, and the Co2C phase promotes CO nondissociative adsorption leading to increased oxygenate selectivity. This study highlights the influence of Mn on the catalyst structure and function and the importance of studying catalysts under industrially relevant reaction times.

Fischer−Tropsch Synthesis: Influence of Mn on the Carburization Rates and Activities of Fe-Based Catalysts by TPR-EXAFS/XANES and Catalyst Testing

Effect of Mn-dopant on carburization of the Fe3O4 catalysts in Fischer-Tropsch synthesis

Impact of H2/CO Ratios on Phase and Performance of Mn-modified Fe-based Fischer Tropsch Synthesis Catalyst

Chemical Imaging of Carbide Formation and Its Effect on Alcohol Selectivity in Fischer Tropsch Synthesis on Mn-Doped Co/TiO2 Pellets

Tuning the Size of TiO2-Supported Co Nanoparticle Fischer-Tropsch Catalysts Using Mn Additions

Kinetics Study of Fischer-Tropsch Reaction to Lower Olefins over MnOx-promoted Fe/SiO2 Catalysts

The role of Manganese in CoMnOx Catalysts for Selective Fischer-Tropsch Synthesis

Tailoring of Fe/MnK-CNTs Composite Catalysts for the Fischer–Tropsch Synthesis of Lower Olefins from Syngas

Impact of Inverse Manganese Promotion on Silica-Supported Cobalt Catalysts for Long-Chain Hydrocarbons via Fischer–Tropsch Synthesis

Revisiting the Syngas Conversion to Olefins over Fe-Mn Bimetallic Catalysts: Insights from the Proximity Effects

Study of the Fischer-Tropsch synthesis on nano-precipitated iron-based catalysts with different particle sizes

Effects of Sm on Fe–Mn Catalysts for Fischer–Tropsch Synthesis

The role of manganese in CoMnO x catalysts for selective long-chain hydrocarbon production via Fischer-Tropsch synthesis

Sintering and carbidization under simulated high conversion on a cobalt-based Fischer-Tropsch catalyst; manganese oxide as a structural promotor

High-Temperature Fischer–Tropsch Synthesis of Light Olefins over Nano-Fe3O4@MnO2 Core–Shell Catalysts

MnOx Promotional Effects on Olefins Synthesis Directly from Syngas over Bimetallic Fe‐MnOx/SiO2 Catalysts

Manganese promotion of a cobalt Fischer-Tropsch catalyst to improve operation at high conversion

Phase characterization of iron/manganese fischer-tropsch catalysts: effect of compositon and reduction conditions

Synthesis of SiO2-stabilized FeMn catalysts for catalytic production of liquid fuels: effect of SiO2 position over bimetallic catalysts

The effect of Mn on the performance of MCF-supported highly dispersed iron catalysts for Fischer–Tropsch synthesis

Tuning Direct CO Hydrogenation Reaction over Fe-Mn Bimetallic Catalysts Toward Light Olefins: Effects of Mn Promotion