Abstract:This work proposes a wide‐temperature localized high‐concentration electrolytes (LHCE) with a high safety feature. A particular electrolyte additive of the electrolytes, 1‐fluoroethyl methyl carbonate (1FEMC), is explored to improve the performance of electrolytes with a better interfacial stability than the previously reported multifunctional additive (4,5‐difluoro‐1,3‐dioxolan‐2‐one DFEC). The 1FEMC achieves an inorganic‐dominated solid electrolyte interphase at both cathode and anode, which leads to an uniform lithium deposition and inhibits the electrolyte decomposition as well as cathode degradation. This LHCE achieves over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Additionally, NCM811||Li cells maintains 84% discharge capacity at −20 °C (compared with that at room temperature). This work presents a research foundation for designing safer Li‐metal batteries that operate in a wide temperature range. The increasing need for energy storage devices with high energy density has led to significant interest in Li‐metal batteries (LMBs). However, the use of commercial electrolytes in LMBs is problematic due to their flammability, inadequate performance at low temperatures, and tendency to promote the growth of lithium dendrites and other flaws. This study introduces a localized high‐concentration electrolyte (LHCE) that addresses these issues by employing non‐flammable electrolyte components and incorporating carefully designed additives to enhance flame retardancy and low‐temperature performance. By incorporating additives to optimize the electrolyte, it is possible to attain inorganic‐dominated solid electrolyte interphases on both the cathode and anode. This achievement results in a uniform deposition of lithium, as well as the suppression of electrolyte decomposition and cathode deterioration. Consequently, this LHCE achieve over 300 stable cycles for both LiNi0.9Mn0.05Co0.05O2||Li cells and LiCoO2||Li cells, as well as 50 cycles for LiNi0.8Mn0.1Co0.1O2 (NCM811||Li) pouch cells. Furthermore, NCM811||Li cells maintain 84% discharge capacity at −20 °C, in comparison to the capacity at room temperature. The utilization of this electrolyte presents novel perspectives for the safe implementation of LMBs.

Widening the Operational Temperature Range of Lithium Batteries Using Flame-Retardant Sulfone-Based Highly Concentrated Electrolytes

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Flame-Retardant and Polysulfide-Suppressed Ether-Based Electrolytes for High-Temperature Li-S Batteries

Flame-retardant concentrated electrolyte enabling a LiF-rich solid electrolyte interface to improve cycle performance of wide-temperature lithium–sulfur batteries

Concentrated Electrolytes Widen the Operating Temperature Range of Lithium‐Ion Batteries

Non-solvating fluorosulfonyl carboxylate enables temperature-tolerant lithium metal batteries

A Novel Zwitterionic Ionic Liquid-Based Electrolyte for More Efficient and Safer Lithium-Sulfur Batteries.

All-temperature Batteries Enabled by Fluorinated Electrolytes with Non-Polar Solvents

Nonflammable Sulfone-Based Electrolytes with Mechanically and Thermally Stable Interfaces Enabling LiNi0.5Mn1.5O4 to Operate at High Temperature

A Fluorinated Ether Co-solvent Enables High Operating Temperature Li-ion Batteries

Achieving Uniform Li Deposition and Suppressed Electrolyte Flammability in Li‐Metal Batteries via Designing Localized High‐Concentration Electrolytes

Fire-extinguishing, recyclable liquefied gas electrolytes for temperature-resilient lithium-metal batteries

Distinct roles: Co-solvent and additive synergy for expansive electrochemical range and low-temperature aqueous batteries

An inorganic molten salt electrolyte-based Li-CO2 battery with moderate working temperature and enhanced performance

High-concentration LiPF6/sulfone electrolytes: structure, transport properties, and battery application.

Highly stable lithium-ion wide-temperature storage performance achieved via anion-dominated solvation structure and electric double-layer engineering

From −20 °C to 150 °C: a lithium secondary battery with a wide temperature window obtained via manipulated competitive decomposition in electrolyte solution

A Low-Concentration Sulfone Electrolyte Enables High-Voltage Chemistry of Lithium-Ion Batteries

Localized High‐Concentration Sulfone Electrolytes with High‐Voltage Stability and Flame Retardancy for Ni‐Rich Lithium Metal Batteries

Expanding the low-temperature and high-voltage limits of aqueous lithium-ion battery

A Wider Temperature Range Polymer Electrolyte for All-Solid-State Lithium Ion Batteries