Abstract:Lithium-ion batteries (LIBs) are key solutions to clean energy. Their high energy densities have led to the dominance of LIBs in mobile devices and electric vehicles. However, traditional electrolyte limits their operation at high voltage and extreme environmental temperatures. Here, we designed a new multifunctional electrolyte, in which lithium bis(fluorosulfonyl)imide (LiFSI) is used as salt and fluorinated diethyl carbonate (DFDEC) is used as the major solvent. With this optimized electrolyte, the graphite||LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) full cells are capable of fast-charging and can deliver long-term cycling with a cutoff voltage as high as 4.5V. Specifically, the battery shows the capacity retention of 84.3% after 500 cycles with an average coulombic efficiency (CE) as high as 99.93%. Synchrotron-based characterization suggests the formation of anion derived, LiF-rich interphases on the surfaces of both graphite anode and NMC811 cathode. Thanks to the fast ion transport and stable interphase, the cell in the optimized electrolyte demonstrates stable cycling behavior within a wide operating temperature. At high temperature (60 oC), the full cell delivers 88.8% of its initial capacity after 130 cycles at a high current density of 1C. At low temperature (-20 oC), the optimized electrolyte enables a capacity retention of 90.9% after 100 cycles when charging and discharging at 0.2C. Acknowledgment: The work done at Brookhaven National Laboratory was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Vehicle Technology Office of the U.S. DOE through Applied Battery Research for Transportation (ABRT) program under contract no. DE-SC0012704. The electrodes used in this study were produced at the U.S. Department of Energy’s (DOE) CAMP (Cell Analysis, Modeling and Prototyping) Facility, Argonne National Laboratory. The CAMP Facility is fully supported by the DOE Vehicle Technologies Office (VTO). This research used beamline 7-ID-2 (SST-2) of the National Synchrotron Light Source II, U.S. DOE Office of Science User Facilities, operated for the DOE Office of Science by Brookhaven National Laboratory under contract number DE-SC0012704. SEM measurements for this manuscript were performed at Center for Functional Nanomaterials, a U.S. DOE office of Science User Facility, at Brookhaven National Laboratory under the contract number DE-SC0012704.

A Low-Concentration Sulfone Electrolyte Enables High-Voltage Chemistry of Lithium-Ion Batteries

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Multifunctional solvent molecule design enables high-voltage Li-ion batteries

Nonflammable Electrolytes for Lithium Ion Batteries Enabled by Ultraconformal Passivation Interphases

(Invited) Fluorinated Linear Carbonate Electrolyte for Lithium-Ion Batteries with Fast-Charging, High Voltage, and Wide Operating Temperatures

Non‐Flammable Electrolyte Enables High‐Voltage and Wide‐Temperature Lithium‐Ion Batteries with Fast Charging

High-Safety and High-Efficiency Electrolyte Design for 4.6 V-class Lithium-Ion Batteries with Non-Solvating Flame-Retardant

High-safety and High-Efficiency Electrolyte Design for 4.6 V-class Lithium-Ion Batteries with a Non-Solvating Flame-Retardant

Low Concentration Sulfolane-Based Electrolyte for High Voltage Lithium Metal Batteries

Low Resistance and High Stable Solid–Liquid Electrolyte Interphases Enable High‐Voltage Solid‐State Lithium Metal Batteries

High-Voltage Graphite//LiNi0.5Mn1.5O4 Full Cell with Bis(fluorosulfonyl)Imide and bis(trifluoromethyl)Sulfonylimide Ionic Liquid Electrolytes

Nonflammable dual-salt localized high-concentration electrolyte for graphite/LiNi0.8Co0.1Mn0.1O2 lithium-ion batteries: Li+ solvation structure and interphase

Localized High‐Concentration Sulfone Electrolytes with High‐Voltage Stability and Flame Retardancy for Ni‐Rich Lithium Metal Batteries

Nonflammable Dual-Salt Electrolytes for Graphite/LiNi 0.8 Co 0.1 Mn 0.1 O 2 Lithium-Ion Batteries: Li + Solvation Structure and Electrode/Eelectrolyte Interphase

Dilute Electrolytes with Fluorine‐free Ether Solvents for 4.5 V Lithium Metal Batteries

A Green, Fire‐Retarding Ether Solvent for Sustainable High‐Voltage Li‐Ion Batteries at Standard Salt Concentration

Improving High-Voltage Performance of Lithium-Ion Batteries with Sulfolane As an Electrolyte Additive

Solid-State Interphases Design for High-Safety, High-Voltage and Long-Cyclability Practical Batteries via Ethylene Carbonate-Free Electrolytes

Self-purifying electrolyte enables high energy Li ion batteries

Sulfolane‐Graphite Incompatibility and Its Mitigation in Li‐ion Batteries

Non-coordinating flame retardants with varied vapor pressures enabling biphasic fire-extinguishing electrolyte for high safety lithium-ion batteries