Abstract:An electromechanically-coupled micro-contact resistance measurement system is built to mimic the contact process during fatigue testing of nanoscale-thickness interconnects using multiple probe methods. The design combines an optical microscope, high-resolution electronic balance, and micromanipulator-controlled electric probe, and is coupled with electrical measurements to investigate microscale contact physics. Experimental measurements are performed to characterize the contact resistance response of the gold nanocrystalline pad of a 35-nm-thick interconnect under mechanical force applied by a tungsten electrode probe. Location of a stable region for the contact resistance and the critical contact force provides better understanding of micro-contact behavior relative to the effects of the contact force and the nature of the contact surface. Increasing contact temperature leads to reduced contact resistance, softens the pad material, and modifies the contact surface. The stability of both contact resistance and interconnect resistance is studied under increasing contact force. Major fluctuations emerge when the contact force is less than the critical contact force, which shows that temporal contact resistance will affect interconnect resistance measurement accuracy, even when using the four-wire method. This performance is demonstrated experimentally by heating the Au line locally with a laser beam. Finally, the contact resistances are calculated using the LET (Li–Etsion–Talke) model together with combined Holm and Sharvin theory under various contact forces. Good agreement between the results is obtained. This research provides a way to measure change in interconnect line resistance directly under a stable contact resistance regime with a two-wire method that will greatly reduce the experimental costs.

In Situ Optical Observation of Nanoscale Contact Spots Evolution Under Normal Loading

Molecular Dynamics Simulation of Elastic–plastic Deformation Associated with Tool–workpiece Contact in Force Sensor–integrated Fast Tool Servo

Experimental Analysis of Interface Contact Behavior Using a Novel Image Processing Method

In Situ Interface Characterization of Arcing Electrode Materials and Evolution in Electrical Endurance Experiments

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

In Situ Observation and Understanding of the Arc Erosion Behavior of Electrical Contact Materials

Observation and Understanding of the Initial Unstable Electrical Contact Behaviors

Computer experiments on nano-indentation: A molecular dynamics approach to the elasto-plastic contact of metal copper

Measurement of real contact area for rough metal surfaces and the distinction of contribution from elasticity and plasticity

The study of anisotropic behavior of nano-adhesive contact by multiscale simulation

An Optical Probe Stage and Its Applications in Mechanical Behavior Measurements of Micro-Objects and Thin Films

On the Relationship Between Contact Resistance and Load Force for Electrode Materials with Rough Surfaces.

Characterization of Micro-Contact Resistance Between A Gold Nanocrystalline Line and A Tungsten Electrode Probe in Interconnect Fatigue Testing

Experimental Study on the Load-Area Relation of Rough Surfaces and Comparison with Theoretical Model

In Situ Observation of Nano-Abrasive Wear

Dynamic Nanoparticle‐Substrate Contacts Regulate Multi‐Peak Behavior of Single Silver Nanoparticle Collisions

Unstable Electrical Contact Behaviors At Nanoscale For Mems Switch

Contact and Friction at Nanoscale

Effect of normal load and roughness on the nanoscale friction coefficient in the elastic and plastic contact regime

Multiscale Simulation of Indentation, Retraction and Fracture Processes of Nanocontact

In-situ measurements of contact evolution for fractal rough surfaces under normal compression