Abstract:A small sample size automated adiabatic calorimeter for measuring heat capacities in the temperature range of 60-360 K has been constructed. The sample cell of the calorimeter was made of thin-walled gold-plated copper with an internal volume of 6 cm(3), equipped with a miniature platinum thermometer, surrounded by two adiabatic shields and housed in a high vacuum can. Two sets of six-junction chromel-constantan thermocouples were mounted between the cell and shields to indicate the temperature difference between them. The lid of the cell was sealed to the main body with a special sealant cycleweld. The adiabatic conditions of the calorimeter cell were automatically controlled by two units of temperature controller. A mechanical pump was used to pump out the vapor of liquid nitrogen in the cryostat to obtain 60 K or even lower temperature. All the experimental data, including the electrical energy and temperature were collected and processed automatically by a personal computer with a predetermined program. The performance of the calorimeter was examined by measuring the heat capacities of alpha-Al2O3. The deviations of experimental results from the smoothed curve lie within +/-0.2%, while the inaccuracy is within +/-0.5% compared with the recommended reference data.The heat capacities of two important nonlinear optical crystals KTiOPO4 and RbTiOAsO4 have been measured by using this calorimeter in the range of 60-360 K, No thermal anomaly was observed from the heat capacity measurements for the two materials in the above-mentioned range. (C) 2000 Elsevier Science B.V. All rights reserved.

Virtual model of the differential pulse calorimeter

Novel Quasi-Isothermal Method of Measuring Heat Capacity in Temperature Modulated Differential Scanning Calorimetry

Accurate heat capacity determination of solids and liquids using a heat conduction calorimeter

A High-Speed Data Acquisition System for ECT Based on the Differential Sampling Method

A small sample-size automated adiabatic calorimeter from 70 to 580 K

Membrane-based nanocalorimeter for high-resolution measurements of low-temperature specific heat

Comparison of Temperature Difference Measurement Technologies Used in Vehicular Heat Exchangers

Heat capacity measurements by a Setaram μDSC3 evo microcalorimeter: estimation of deviation in the measurement, advanced data analysis by mathematical gnostics, and prediction by the artificial neural network

Modulated-bath AC calorimetry using modified commercial Peltier-elements

Design, calibration and testing of a novel isothermal calorespirometer prototype

A small sample-size automated adiabatic calorimeter from 70 to 580 K - Molar heat capacities of α-Al2O3

An Adiabatic Calorimeter for Heat Capacity Measurements of Small Samples - the Heat Capacity of Nonlinear Optical Materials Ktiopo4 and Rbtioaso4 Crystals

Adsorptive microcalorimeter and its volume calibration

Pulsed differential scanning calorimeter measurement of collagene fiber heat capacity

New, Optimized Skin Calorimeter Version for Measuring Thermal Responses of Localized Skin Areas during Physical Activity

A Power-Modulated Accelerating Rate Calorimetry for Varying Heat Capacity Measurement During Thermal Decomposition

A Method to Determine Human Skin Heat Capacity Using a Non-Invasive Calorimetric Sensor

A New Flow Calorimeter For The Determination Of The Isobaric Heat-Capacity Of Vapors

Chemical Calibration for Cooling Constants of Conduction Calorimeter

Heat Dissipation Analysis and Correction of the Sample in Accelerating Rate Calorimetric Experiment

Peltier ac calorimeter