Barrier Materials Integrated with Gas Regulation Function Are Used to Reduce the Explosion Risk of Battery Systems
Jingyu Chen,Chengshan Xu,Junyuan Liu,Ye Sun,Shaw Kang WONG,Wenyu Dong,Hongni Huang,Zhikai Yang,Yong Peng,Jiangyun Zhang,Languang Lu,Guoqing Zhang,Xuning Feng,Minggao Ouyang
DOI: https://doi.org/10.1016/j.cej.2024.158235
IF: 15.1
2024-01-01
Chemical Engineering Journal
Abstract:Large-capacity lithium iron phosphate batteries are widely used in energy storage stations and electric vehicles due to their high cost-effectiveness and long lifespan. However, research shows that the gases generated during thermal runaway are mainly combustible, which may lead to fires or even explosions. Nevertheless, within the millimeter-scale confined space of a battery pack, effective solutions are scarce, making it challenging to simultaneously suppress kilowatt-level heat transfer and dilute the accumulated combustible gases. This research has developed a multifunctional fire shield with capabilities of “low-temperature heat conduction, medium-temperature heat absorption, high-temperature thermal insulation, and gas regulation.” The material is composed of hydrogel, aluminum hydroxide, ceramic fiber, and ammonium bicarbonate. In the low-temperature range, it exhibits an excellent thermal conductivity (0.58 W·m−1·K−1), capable of maintaining the battery module’s operating temperature within a reasonable range. In the medium to high-temperature range, its thermal conductivity rapidly decreases (0.04 W·m−1·K−1), and with its high phase change enthalpy (1727 J/g), the material can suppress the thermal propagation of a 100 Ah lithium iron phosphate battery module. This material starts to release CO2 at 90℃. In a confined space, the CO2 mixes uniformly with the gases generated during the thermal runaway process of the battery, reducing the risk of these gases (increasing the lower explosion limit by 44 % and reducing the maximum laminar flame speed by 58 %). Therefore, the multifunctional fire shield demonstrates exceptional heat conduction, heat absorption, thermal insulation, and gas regulation performance. This research provides new insights for the safety design of battery systems.