Abstract:Quality of waste tire pyrolysis oil was improved via hydrogenation over NiMo/γ‐Al2O3 or NiW/γ‐Al2O3 catalysts to eliminate PAHs compounds. Simultaneously, organosulfurous compounds was reduced. Under 50 bar initial H2 pressure at 350°C for 6 h, NiMo catalyst exhibited the higher performance for hydrodesulfurization (98.4% sulfur removal) with lower ability for PAHs hydrogenation (66.0% PAHs removal), while NiW catalyst showed a preference for PAHs hydrogenation with lower performance for sulfur elimination (74.2% sulfur removal and 71.1% PAHs removal). Summary This research aimed to improve the quality of waste tire pyrolysis oil (WTPO) via hydrogenation to eliminate polycyclic aromatic hydrocarbons (PAHs), which are classified as toxic compounds or precursors to induce the formation of particulate matter. Given the presence of organosulfurous compounds in WTPO, this research was consisted of two steps. First, the hydrogenation of naphthalene, a model PAH compound, was used to screen for suitable promoters [molybdenum (Mo), tungstate (W), and platinum (Pt)] for nickel‐supported gamma‐alumina (Ni/γ‐Al2O3) catalyst to provide a high sulfur tolerance and high PAH hydrogenation efficiency. Second, the obtained suitable catalysts were applied for the hydrogenation of 50 wt% WTPO solution in decane containing 15 982 ppm PAHs and a 0.75 wt% sulfur content. Although the NiPt/γ‐Al2O3 catalyst exhibited the highest performance with 83.8% naphthalene conversion under 40 bar initial H2 pressure at 350°C for 6 hours, it was less tolerant to the presence of thiophene, one of the organosulfurous compounds found in WTPO. Thus, the NiMo/γ‐Al2O3 and NiW/γ‐Al2O3 catalysts were selected for WTPO hydrogenation. The PAHs hydrogenation and hydrodesulfurization occurred simultaneously in both catalytic systems. Under 50 bar initial H2 pressure at 350°C, the NiMo/γ‐Al2O3 catalyst had a higher ability for hydrodesulfurization (98.4% maximum sulfur removal) than hydrogenation of PAHs (66.0% removal of PAHs), whereas NiW/γ‐Al2O3, with lower acidity, showed a preference for hydrogenation of PAHs (71.1% removal of PAHs) with a lower hydroisomerization efficiency (74.2% sulfur removal). Moreover, the chemical structure of PAHs affected the ability to be eliminated by hydrogenation. PAHs having unsubstituted rings could be easily hydrogenated, while the removal of PAHs containing alkyl substituents in both aromatic rings required severe reaction conditions due to their high steric hindrance for adsorption onto the catalyst active sites.

Effect of Mo promoters on catalytic performance of Ni-based catalyst for hydrogenation of naphthalene derivatives

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Production of cleaner waste tire pyrolysis oil by removal of polycyclic aromatic hydrocarbons via hydrogenation over Ni‐based catalysts

Effect of Ni Promoter on Dibenzothiophene Hydrodesulfurization Performance of Molybdenum Carbide Catalyst

Effect of Ni/Mo on the preparation of non-loaded NiMoSx catalysts and the hydrogenation performance of coal tar

Comparative Study on the Hydrogenation of Naphthalene over Both Al2O3-Supported Pd and NiMo Catalysts against a Novel LDH-Derived Ni-MMO-Supported Mo Catalyst

Catalytic Hydropyrolysis of Lignin Using NiMo-doped Catalysts: Catalyst Evaluation and Mechanism Analysis

Promotion of Ni/MCM-41 Catalyst for Hydrogenation of Naphthalene by Co-Impregnation with Polyols

Effect Of Ni Loading On The Catalytic Properties Of Molybdenum Oxides For The Isomerization Of Heptane

Synthesis of Ni/Mo/N Catalyst and Its Application in Benzene Hydrogenation in the Presence of Thiophene

Influence of Ni on the active phase and hydrodenitrogenation and hydrodesulfurization activities of MoS2 catalysts

MoNi/gamma-Al2O3 Catalyst: Preparation and Catalytic Activity for Acetic Acid Hydrotreating

Electronic Tuning of Ni by Mo Species for Highly Efficient Hydroisomerization of N-Alkanes Comparable to Pt-Based Catalysts

MoO x regulating Ni-based catalyst anchored on N-doped carbon microspheres for catalytic hydrogenation of nitroarenes

Effect of Mo Addition on the Performance of Ni-Based Methanation Catalysts Supported by Halloysites

Effect of Ammonia on the Performance of Catalysts for Selective Hydrogenation of 1-Methylnaphthalene

Fabrication of Well-Structured NiMo Hydrodesulfurization Catalysts Using Electropositive Mo-based Nanoparticles

Nickel aluminate spinel-derived catalysts for aqueous-phase hydrogenolysis of glycerol with in-situ hydrogen production: Effect of molybdenum doping

Ultra-small Mo2N on SBA-15 As a Highly Efficient Promoter of Low-Loading Pd for Catalytic Hydrogenation

Nickel molybdenum bimetallic nitrides as efficient catalysts for hydrodeoxygenation of methyl palmitate

A Study on the Role of Ni Atoms in the HDN Activity of NiMoS2/Al2O3 Catalyst