Abstract:Polyetheretherketone (PEEK) is a high performance engineering plastics with high mechanical strength, modulus, toughness and wear resistance. For the application in some more severe work conditions, it is necessary to further improve the mechanical properties and wear resistance of PEEK. Nanoparticles reinforced PEEK has attracted more and more attentions and actually plays an important role in the field of modified PEEK plastic due to its unique properties resulting from the nano-scale structure of composites. This chapter reviewed a serial of previous works in our laboratory and focused on the mechanical and tribological properties of nanometer Al2O3 or SiO2 particles filled PEEK composites during which the research on the fretting properties of PEEK composites was novel. Results showed that the incorporation of nanometer Al2O3 or SiO2 with certain diameter and content improved the wear resistance of PEEK greatly under different testing conditions of sliding friction or fretting. Furthermore, some mechanical strength and modulus also increased. By comparison, Al2O3 always performed superior in mechanical properties and tribological properties than SiO2 especially in the fretting wear resistance. It should be noted that the modification of some coupling agents on the surface of nanometer inorganic particles would improve also the dispersion of the particles in PEEK matrix and correspondingly reduce the particles agglomeration, resulted in increase mechanical performance. Therefore, the key factors influencing the mechanical properties and tribological properties were all discussed detail in this chapter, such as the nanometer particle content, diameter, type, material preparation and modification method. In addition, the fracture mechanism and wear mechanism were both investigated through the observation of fractograph and wear surface by SEM with a view to make clear the relations between structure and performance and to provide a instruction for the nanoparticles reinforcing PEEK composites.

Tribological properties of PEEK composites reinforced by MoS2 modified carbon fiber and nano SiO2

MoS_2 Reinforced PEEK Composite for Improved Aqueous Boundary Lubrication

Friction and Wear Properties of Carbon Fabric Composites Filled with PTFE and MoS2

Preparation and Tribological Behaviors of Lubrication-Enhanced PEEK Composites

MECHANICAL AND TRIBOLOGICAL BEHAVIORS OF NANOMETER AL(2)O(3) AND SIO2 REINFORCED PEEK COMPOSITES

Study on Tribological Properties of Kevlar Fabric Composites Filled with PFW and MoS2

Effect of MoS2 on the Tribological Properties of Carbon Fabric Composites under Wet Conditions

Friction and Wear Performance of PTFE Modification Composites Filled with Micrometer and Nanometer MoS2

Tribological Properties of Carbon Fabric Reinforced Phenolic-Based Composites Containing CNTs@MoS2 Hybrids

MoS2 Nanosheets-Decorated Carbon Fiber Hybrid for Improving the Friction and Wear Properties of Polyimide Composite

Synergism of Hollow MoS2 Nano-Particles and WS2 Micro-Particles on Improving the Tribological Properties of Carbon Fiber Fabric Reinforced Phenolic-Based Composites

Preparation and Tribological Properties of Graphene/poly(ether Ether Ketone) Nanocomposites

Tribological Behaviour of Polymeric Coatings: II. SCF‐Reinforced PEEK Nanocomposite Systems

Nano-MOS2 Modified PBO Fiber Hybrid for Improving the Tribological Behavior and Thermal Stability of TPI/PEEK Blends

The Tribological Properties of PTFE Composites Reinforced with Different Fillers

Tribological properties of PEEK-based composite coating prepared by thermal spraying

Tribological Properties of Molybdenum Disulfide and Helical Carbon Nanotube Modified Epoxy Resin

Synergistic Effects of Carbon Nanotube/Nano-MoS2 Hybrid on Tribological Performance of Polyimide Nanocomposite Films

Fabrication and Tribological Properties of Epoxy Nanocomposites Reinforced by MoS2 Nanosheets and Aligned MWCNTs

In Situ Formation of MoS2 on the Surface of CF to Improve the Tribological Properties of PUE

Friction and Wear Properties of PTFE Composites Filled with Nano-Si3N4,Nano-Si3N4-graphite or Nano-Si3N4-MoS2