Abstract:Polyetheretherketone (PEEK) is a high performance engineering plastics with high mechanical strength, modulus, toughness and wear resistance. For the application in some more severe work conditions, it is necessary to further improve the mechanical properties and wear resistance of PEEK. Nanoparticles reinforced PEEK has attracted more and more attentions and actually plays an important role in the field of modified PEEK plastic due to its unique properties resulting from the nano-scale structure of composites. This chapter reviewed a serial of previous works in our laboratory and focused on the mechanical and tribological properties of nanometer Al2O3 or SiO2 particles filled PEEK composites during which the research on the fretting properties of PEEK composites was novel. Results showed that the incorporation of nanometer Al2O3 or SiO2 with certain diameter and content improved the wear resistance of PEEK greatly under different testing conditions of sliding friction or fretting. Furthermore, some mechanical strength and modulus also increased. By comparison, Al2O3 always performed superior in mechanical properties and tribological properties than SiO2 especially in the fretting wear resistance. It should be noted that the modification of some coupling agents on the surface of nanometer inorganic particles would improve also the dispersion of the particles in PEEK matrix and correspondingly reduce the particles agglomeration, resulted in increase mechanical performance. Therefore, the key factors influencing the mechanical properties and tribological properties were all discussed detail in this chapter, such as the nanometer particle content, diameter, type, material preparation and modification method. In addition, the fracture mechanism and wear mechanism were both investigated through the observation of fractograph and wear surface by SEM with a view to make clear the relations between structure and performance and to provide a instruction for the nanoparticles reinforcing PEEK composites.

MoS_2 Reinforced PEEK Composite for Improved Aqueous Boundary Lubrication

Tribological behavior of modified polyetheretherketone composites in sliding against stainless steel under water lubrication

Tribological properties of PEEK composites reinforced by MoS2 modified carbon fiber and nano SiO2

Ultralow friction of PEEK composites under seawater lubrication

Carbon Fibre Reinforced Bisphenol-a Type SPEEK Composite for Water Lubricated Superlubricity

Superior Tough, Highly Wear Durable and Self-Lubricating Epoxy Composite Co-Enhanced by Soft and Hard Nanomaterials

Preparation and Tribological Behaviors of Lubrication-Enhanced PEEK Composites

Tribological properties of PEEK-based composite coating prepared by thermal spraying

Preparation and tribological properties of Mo/MoS2-Pb-PbS composite films

Tribological Properties of PEEK and Its Composite Material under Oil Lubrication

Tribological Performance Study of Low-Friction PEEK Composites under Different Lubrication Conditions

Tribological Behavior of Sulfonated Polyether Ether Ketone with Three Different Chemical Structures under Water Lubrication

Anti-friction Epoxy Resin-Based Self-Lubricating Coatings Containing Mo2C MXene Driven by Friction Chemistry Mechanisms

Improved Wear Resistance and Environmental Adaptability of a Polysiloxane/Molybdenum Disulfide Composite Lubricating Coating Using Polyhedral Oligomeric Silsesquioxane

Effect of MoS2 on the Tribological Properties of Carbon Fabric Composites under Wet Conditions

Preparation and tribological property of MoS 2 @PDA@POSS core-shell-shell/Epoxy composite lubricating coating with good humidity adaptability

A Sulfonated Modification of PEEK for Ultralow Friction

Diatomite@MoS2 Nanocomposite Layers as Composite Coating Targeting for Mg Alloys Endowed with Properties of Anticorrosion and Antiwear.

Preparation and Friction Wear Performance of Zro2/Mos2 Peo Composite Coating

MECHANICAL AND TRIBOLOGICAL BEHAVIORS OF NANOMETER AL(2)O(3) AND SIO2 REINFORCED PEEK COMPOSITES

Friction and Wear Properties of Cyanex 302-Modified MoS2 Micro-Sized Spheres as Additive in Liquid Paraffin