Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. The manufacturing process of composite structural components involves the assembly of composite parts using adhesives, which introduces variations in the geometrical and mechanical properties of bonded joints. The fracture energy under mode-I loading (GIc) is a parameter used to predict crack propagation and evaluate the residual strength of the joint. This work proposes a numerical-experimental procedure to determine GIc in mode I, while considering the uncertainties inherent in the manufacturing process of bonded joints. The proposed procedure employs a three-dimensional finite element model to simulate a double cantilever beam test, using finite element commercial software. The cohesive zone model is applied to simulate the mechanical behavior of the adhesive, and experimental data are used to feed the computational model. A Plackett-Burman design is performed to reduce the number of experiments and evaluate the effect of the main influence parameters. Force-displacement curves are obtained, the compliance-based beam method is applied to determine GIc in mode I, employing both trapezoidal and triangular traction-separation laws. The results are thoroughly examined, taking into account the potential strengths and limitations of the proposed procedure, particularly in its application to predicting the behavior of bonded composite joints under mode I loading conditions. The proposed approach can help to understand the uncertainties effect related to the manufacturing process of bonded joints on GIc values, and improve the reliability of predicting crack propagation and residual strength assessment in bonded joints.

Energy release rate in bimaterial specimens tested in pure modes I and II

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Evaluation of the cracked lap shear test for mixed-mode fracture toughness estimation of adhesive joints

Study of Ligament Length Effect on Mode Mix of a Modified In-Plane Shear Test Specimen

Mixed-Mode Fracture Of Hybrid Material Bonded Interfaces Under Four-Point Bending

The effects of shear and near tip deformations on interface fracture of symmetric sandwich beams

Numerical Analysis of the Stress Intensity Factor for Two Kinds of Mixed-Mode Crack Specimens

Influence of the Test Method on the Characterization of the Fatigue Delamination Behavior of a Composite Material under Mixed Mode I/II Fracture

Novel beam analysis of end notched flexure specimen for mode-II fracture

Assessing critical fracture energy in mode I for bonded composite joints: A numerical–experimental approach with uncertainty analysis

Energy Release Rate of Beam-Type Fracture Specimens with Hygrothermal Influence

Mode-II Fatigue Fracture of Bi-material Bonded Interfaces Using Tapered ENF Specimens

Characterization of Mode-II Fracture of Bi-Material Bonded Interfaces Using Tapered ENF Specimen

Nonlinear Fracture Mechanics Analysis of Nano-Scale Piezoelectric Double Cantilever Beam Specimens with Surface Effect

Analysis of Tapered ENF Specimen and Characterization of Bonded Interface Fracture under Mode-II Loading

Numerical Fatigue Crack Growth on Compact Tension Specimens under Mode I and Mixed-Mode (I+II) Loading

Energy release rate of a single edge cracked specimen subjected to large deformation

Numerical investigation of two-dimensional Mode-II delamination in composite laminates

Acoustic Emission Characteristics of Pre-Cracked Specimens under Biaxial Compression

Fracture Analysis of Shear Deformable Bi-Material Interface

Mechanical investigation of inverse FML under mode II loading using acoustic emission and finite element method