Abstract:Purpose The use of additive manufacturing in many branches of industry is increasing significantly because of its many advantages, such as being able to produce complex parts that cannot be produced by classical methods, using fewer materials, easing the supply chain with on-site production, being able to produce with all kinds of materials and producing lighter parts. The binder jetting technique, one of the additive manufacturing methods researched within the scope of this work, is predicted to be the additive manufacturing method that will grow the most in the next decade, according to many economic reports. Although additive manufacturing methods have many advantages, they can be slower than classical manufacturing methods regarding production speed. For this reason, this study aims to increase the manufacturing speed in the binder jetting method. Design/methodology/approach Adaptive slicing and variable binder amount algorithm (VBAA) were used to increase manufacturing speed in binder jetting. Taguchi method was used to optimize the layer thickness and saturation ratio in VBAA. According to the Taguchi experimental design, 27 samples were produced in nine different conditions, three replicates each. The width of the samples in their raw form was measured. Afterward, the samples were sintered at 1,500 °C for 2 h. After sintering, surface roughness and density tests were performed. Therefore, the methods used have been proven to be successful. In addition, measurement possibilities with image processing were investigated to make surface roughness measurements more accessible and more economical. Findings As a result of the tests, the optimum printing condition was decided to be 180–250 μm for layer thickness and 50% for saturation. A separate test sample was then designed to implement adaptive slicing. This test sample was produced in three pieces: adaptive (180–250 μm), thin layer (180 μm) and thick layer (250 μm) with the determined parameters. The roughness values of the adaptive sliced sample and the thin layer sample were similar and better than the thick layer sample. A similar result was obtained using 12.31% fewer layers in the adaptive sample than in the thin layer sample. Originality/value The use of adaptive slicing in binder jetting has become more efficient. In this way, it will increase the use of adaptive slicing in binder jetting. In addition, a cheap and straightforward image processing method has been developed to calculate the surface roughness of the parts.

Effect of printing speed on quality of printed parts in Binder Jetting Process

A review of binder jet process parameters; powder, binder, printing and sintering condition

Real Time Observation of Binder Jetting Printing Process Using High-Speed X-ray Imaging

Process development for green part printing using binder jetting additive manufacturing

High-Speed X-Ray Imaging of Droplet-Powder Interaction in Binder Jet Additive Manufacturing

Binder jetting: A review of process, materials, and methods

Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges

Using adaptive slicing method and variable binder amount algorithm in binder jetting

State of the art of metal powder bonded binder jetting printing technology

Location dependency of green density and dimension variation in binder jetted parts

Binder jetting of SS316L: a computational approach for droplet-powder interaction

Optimization of Binder Jetting Using Taguchi Method

Simulation of Binder Jetting and Analysis of Magnesium Alloy Bonding Mechanism

Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals

Effective use of adaptive slicing in binder jetting using Taguchi method and surface roughness measurement with image processing

Binder jetting additive manufacturing: Three-dimensional simulation of micro-meter droplet impact and penetration into powder bed

Metal Binder Jetting Additive Manufacturing: A Literature Review

Greyscale printing and characterization of the binder migration pattern during 3D sand mold printing

Removal of Stair-Step Effects in Binder Jetting Additive Manufacturing Using Grayscale and Dithering-Based Droplet Distribution

Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment

Non-heat source forming technology of binder jetting metal powder and its post-treatment process