Abstract:Metal 3D Printing (M3DP) has rapidly grown as a viable manufacturing method over recent years. These methods promise reducing the barrier to entry for prototyping and fabricating highly complex geometries that are almost impossible to create using traditional metal manufacturing processes, such as casting and machining. There are several M3DP methods that are widely accepted for prototyping applications, but almost no methods provide mass-scale and reliable fabrication of metal components for industrial use. One potential method which has shown a lot of promise over the past few years is binder jetting (BJet). Unlike most laser-based M3DP prototyping applications which generate parts on a point-by-point basis, BJet has the ability to fabricate parts on a layer-by-layer basis allowing for arrays of components to be generated simultaneously on one print bed while maintaining a similar resolution quality compared to laser-based processes. This process is predominantly available through original equipment manufacturers (OEM) as they require extensive pre-processing of a computer-aided design (CAD) before printing. This is due to the highly porous green parts which emerge from the printer before sintering. During sintering, one can observe extreme shrinkage and warping of geometries, which widely vary based on the geometric features. This study presents a computational framework to model the qualitative deformation of BJet green parts during sintering. We utilize a fully coupled thermo-mechanical model with space-varying mechanical and thermal properties to characterize the porous, viscous material during sintering. An Affine-particle-in-cell (APIC) material point method (MPM) is used to track large deformations in the component. A 2-dimensional numerical example is shown with qualitative comparison of BJet sintered components shown in literature. Ongoing work looks to integrate this physical model with a data-driven model to more efficiently predict the deformation of M3DP components during bulk sintering.

Location dependency of green density and dimension variation in binder jetted parts

Effect of Particle Size Distribution on Powder Packing and Sintering in Binder Jetting Additive Manufacturing of Metals

Process development for green part printing using binder jetting additive manufacturing

Greyscale printing and characterization of the binder migration pattern during 3D sand mold printing

Binder jetting additive manufacturing: Three-dimensional simulation of micro-meter droplet impact and penetration into powder bed

Binder Jetting Additive Manufacturing: Effect of Particle Size Distribution on Density

Metal Binder Jetting Additive Manufacturing: A Literature Review

Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing

Effect of printing speed on quality of printed parts in Binder Jetting Process

Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges

A review of binder jet process parameters; powder, binder, printing and sintering condition

Powder condition and spreading parameter impact on green and sintered density in metal binder jetting

X-ray observation study of the influence of binder deposition on sintering process of aluminum binder jetting

A coupled thermo-mechanical material point model of binder jetted green part sintering

Binder jetting of SS316L: a computational approach for droplet-powder interaction

High-Speed X-Ray Imaging of Droplet-Powder Interaction in Binder Jet Additive Manufacturing

Modeling of Powder Bed Deformation in the Binder Jetting Technology

Removal of Stair-Step Effects in Binder Jetting Additive Manufacturing Using Grayscale and Dithering-Based Droplet Distribution

Simulation of Binder Jetting and Analysis of Magnesium Alloy Bonding Mechanism

Binder jetting: A review of process, materials, and methods

Powder reusability in Metal Binder Jetting