Abstract:Fill factor (FF) is a determining parameter for the power conversion efficiency (PCE) of organic solar cells (OSC). So far, nonfullerene (NF) OSCs with state-of-the-art PCEs exhibit FFs <0.8, lower than the values of Si or perovskite solar cells. The FFs directly display the dependence of photocurrent on bias, meaning that the competition between charge extraction and recombination is modulated by internal electric potential (Vin). Here, we report a study to understand key parameters/properties affecting the device FF based on seven groups of NF-OSCs consisting of widely used PBDBT-2F or PTB7-Th donors and representative NF-acceptors with FFs ranging from 0.60 to 0.78 and PCEs from 10.27 to 16.09%. We used field-dependent transient photocurrent measurements to reveal that fast and field-insensitive charge extraction at low Vin is an essential prerequisite for obtaining high FFs (0.75–0.8), which is enabled by balanced charge transport in steady and reduced bimolecular charge recombination in high purity phases. With bias-dependent quantum efficiency analysis, we further show that the recombination loss at low Vin in the devices with low FFs tends to be more significant involving excitons generated in the donor phase of blends. Our results provide relevance for how to improve the FF toward the boost of photovoltaic performance in NF-OSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c09123?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c09123</a>.Calculation methods of physical parameters; energy level of materials; EQE spectra; normalized photocurrent decay kinetics; τext versus FF characteristics; TPC and TPV measurements; dark J–V characteristics of single-carrier devices; illumination-dependent open-circuit curves; AFM images; and bias-dependent EQE spectra (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09123/suppl_file/am0c09123_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High fill factor organic solar cells with increased dielectric constant and molecular packing density

Increasing Molecular Packing Density and Dielectric Constant in Non-Fullerene Acceptors Enables to Boost the Fill Factor Approaching 0.82 in Organic Solar Cells

Rational Design Non-Fullerene Acceptor-Based High Efficiency BHJ Polymer Solar Cells Through Theoretical Investigations

A Highly Efficient Non‐Fullerene Organic Solar Cell with a Fill Factor over 0.80 Enabled by a Fine‐Tuned Hole‐Transporting Layer

Local Dipole Modulation Toward High Fill Factor in Organic Solar Cells

Achieving High Fill Factor in Organic Photovoltaic Cells by Tuning Molecular Electrostatic Potential Fluctuation

On the understanding of energy loss and device fill factor trade-offs in non-fullerene organic solar cells with varied energy levels

Non-fullerene acceptor with asymmetric structure and phenyl-substituted alkyl side chain for 20.2% efficiency organic solar cells

Molecular Packing and Dielectric Property Optimization through Peripheral Halogen Swapping Enables Binary Organic Solar Cells with an Efficiency of 18.77%

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

High Open-Circuit Voltage Organic Solar Cells with 19.2% Efficiency Enabled by Synergistic Side-Chain Engineering

Fast Field-Insensitive Charge Extraction Enables High Fill Factors in Polymer Solar Cells

Fibrillization of Non‐Fullerene Acceptors Enables 19% Efficiency Pseudo‐Bulk Heterojunction Organic Solar Cells

Conformation flipping of asymmetric nonfullerene acceptors enabling high performance organic solar cells with 77% fill factors

Vertically Optimized Phase Separation with Improved Exciton Diffusion Enables High-Efficiency Organic Solar Cells with Thick Active Layers

Systematic Merging of Nonfullerene Acceptor π-Extension and Tetrafluorination Strategies Affords Polymer Solar Cells with >16% Efficiency

Realizing an Unprecedented Fill Factor of 82.2% in Ternary Organic Solar Cells via Co‐Crystallization of Non‐Fullerene Acceptors

High‐Efficiency Nonfullerene Organic Solar Cells: Critical Factors that Affect Complex Multi‐Length Scale Morphology and Device Performance

High‐Efficiency Organic Solar Cells with Wide Toleration of Active Layer Thickness

Highly Efficient Fullerene-Free Organic Solar Cells Operate at Near Zero Highest Occupied Molecular Orbital Offsets

Synergistic Control of Multilength-Scale Morphology and Vertical Phase Separation for High-Efficiency Organic Solar Cells