Abstract:Silty sand can be prone to erosion because it is short of stability cementation materials. In recent years, various emerging soil stabilizers, especially natural organic substance and polymer, have been used to improve soil strength, water stability and ability of erosion resistance. In this study, a new type of soil stabilization additive modified carboxymethyl cellulose (M-CMC), consisting of carboxymethyl cellulose (CMC) and polyacrylamide (PAM), was developed for stabilization treatment of silty sand. A series of laboratory tests were conducted to evaluate the performance of M-CMC application on shear strength, permeability, water susceptibility and microstructure of the silty sand soil treated with additive concentration range of 0% - 1.3%. Moreover, rainfall simulation experiments were conducted to evaluate the effect of M-CMC on the erosion control of silty sand which compacted soil in a large-sized runoff (1 m2) plots. Test plot which treated with 1.1% concentration of soil stabilizer and control plot which treated with same amount of water were cured outdoor for 50 days before rainfall simulation test. Rainfall intensity was applied at 120 mm·h-1 for 60 min. Finally, a field test is performed in order to assess the practical application effect of silty sand with 1.1% M-CMC. In general, the results showed that an increase of the concentration of M-CMC resulted in an improvement in water susceptibility and shear strength but a decrease in the infiltration rate. Internal friction angle of the treated soil remarkably increased under a low M-CMC concentration (less than 0.7%), while cohesion of them sharply increased under a relatively high M-CMC concentration (larger than 0.7%). Water susceptibility of the treated samples was improved remarkably under a relatively high M-CMC concentration (larger than 0.7%). Permeability coefficient of them decreased significantly when the M-CMC concentration was increased from 0 to 0.5% and, then, from 0.9% to 1.3%. Based on the images obtained from a scanning electron microscopy (SEM), the “coating” and “netting” effects were attributable to the observed improvement of the treated soil. When a plot was protected by a thin layer of soil treated with 1.1% MCMC, its erosion resistance was greatly improved, infiltration rate of water and soil loss yield of plot decreased greatly and even though under a rainfall intensity of 120 mm·h-1. The field test with long-term monitoring (three years) confirmed the M-CMC can effectively control erosion of silty sand slopes for a prolonged period of time.

Dry–wet degradation of calcareous silt stabilized with carrageenan

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Degradation effect of seawater on the long-term dynamic behavior of artificially cemented sand

Experimental Study on the Strength Deterioration and Mechanism of Stabilized River Silt Reinforced with Cement and Alginate Fibers

Effect of Stabilization/solidification on Mechanical and Phase Characteristics of Organic River Silt by a Stabilizer

Multiscale experimental analysis of marine clay stabilized with coal gangue–calcium carbide residue geopolymer

Impact of polymer mixtures on the stabilization and erosion control of silty sand slope

Strength and hygroscopic behavior of biopolymer-treated silty sand under remodeling and dry-wet cycles

Combined stabilization/solidification and electroosmosis treatments for dredged marine silt

Undrained cyclic responses of biocemented calcareous silty sand

Dry-Wet Cycles Durability of Solid Waste Based Cementing Materials Solidifying Different Characteristic Soils

Mechanics, durability, and microstructure analysis of marine soil stabilized by an eco-friendly calcium carbide residue-activated coal gangue geopolymer

Mechanical and micro-mechanical investigations of nano-SiO2 and polypropylene fiber reinforced cement soil in marine environments

Microstructural and mechanical properties of marine clay cemented with industrial waste residue-based binder (IWRB)

Effect of seawater on solidification/stabilisation treatment of marine soft soil slurry by lime-activated ISSA and GGBS

The Influence of Different Curing Environments on the Mechanical Properties and Reinforcement Mechanism of Dredger Fill Stabilized with Cement and Polypropylene Fibers

The Role of Biopolymers on the Water Retention Capacity of Stabilized Sand

Coupling effect of biocementation-fiber reinforcement on mechanical behavior of calcareous sand for ocean engineering

Wetting–drying effects on the mechanical performance of xanthan gum biopolymer-stabilized soil

Effects of Biopolymers on the Liquid Limit and Undrained Shear Strength of Soft Clays

Performance Evaluation and Mechanism Study of Solid Waste-Based Cementitious Materials for Solidifying Marine Soft Soil under Seawater Mixing and Erosion Action