Abstract:MXenes, as an emerging group of two-dimensional materials, have attracted significant interest for diverse photoelectric applications by virtue of their tunable terminated surface, excellent electrical conductivity, and strong nonlinear optical response. They are usually synthesized via strategies involving hydrofluoric acid, which may result in oxygenic and hydrophilic termination groups on the MXene surface and thus decrease their stability in air. Herein, a mild synthesis method based on electrochemical exfoliation is proposed to prepare Ti3C2Tx MXene quantum dots (QDs), which are highly fluorinated to enhance stability. The open-aperture Z-scan system was employed to measure the nonlinear transmittance of the MXene QDs and proves their broadband saturable absorption from 540 to 1550 nm. By integrating the MXene QD saturable absorber into an ytterbium-doped fiber laser, a set of highly stable 357 ps mode-locked pulses centered at 1069.17 nm was achieved under a low threshold power of 54 mW. In addition, tunable mode-locked optical spectra could be observed in the cavity when switching the polarization state. This work provides an environmentally friendly approach to synthesize stable MXene QDs and opens an avenue for the realization of low-threshold and tunable photonics applications based on MXene QDs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02369?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02369</a>.Synthesis method for Ti3C2Tx MXene QDs by HF etching, electrochemical etching and fluorination mechanism, CV test, AFM and FTIR results and the stability of MXene QDs, high-resolution XPS of aluminum (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02369/suppl_file/an0c02369_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Linear-cavity-based single frequency fiber laser with a loop mirror and Ti2CTx quantum dots

Microlaser based on a hybrid structure of a semiconductor nanowire and a silica microdisk cavity.

Development of a 1550-nm InAs/GaAs Quantum Dot Saturable Absorber Mirror with a Short-Period Superlattice Capping Structure Towards Femtosecond Fiber Laser Applications

High Modulation Depth Enabled by Mo2Ti2C3Tx MXene for Q-Switched Pulse Generation in a Mid-Infrared Fiber Laser

Ti3C2Tx MXene Quantum Dots with Enhanced Stability for Ultrafast Photonics

A single frequency fiber laser with an on-chip high-Q silicon microring cavity

Liquid-Phase Exfoliation of Ta<sub>2</sub>NiS<sub>5</sub> and Its Application in Near-Infrared Mode-Locked Fiber Lasers with Evanescent Field Interactions and Passively Q-Switched Bulk Laser

Widely Wavelength-Tunable High Power Single-Longitudinal-Mode Fiber Laser in Mid-Infrared Waveband

Spatiotemporal mode-locking in a linear-cavity Er:ZBLAN fiber laser

Single-frequency narrow-linewidth Tm-doped fiber laser using silicate glass fiber

Passively generated Q-switched pulses fiber laser in 2μm wavelength using MXene Ti 3 C 2 T x and Ti 2 CT x saturable absorber

Quasi-2D Mn3Si2Te6 Nanosheet for Ultrafast Photonics

Zero‐Dimensional MXene‐Based Optical Devices for Ultrafast and Ultranarrow Photonics Applications

MXene Ti3C2Tx (T = F, O, or OH) saturable absorber for a 2 μm doubly Q-switched laser with AOM

Compact passively Q-switched single-frequency distributed Bragg reflector fiber laser at 2.0 µm

High-Power Mode-Locked Fiber Laser Using Lead Sulfide Quantum Dots Saturable Absorber

Zero‐Dimensional MXene: Zero‐Dimensional MXene‐Based Optical Devices for Ultrafast and Ultranarrow Photonics Applications (adv. Sci. 22/2020)

Ti3C2 MXene Photoexciting Nanoflakes for Localization of Supercontinuum Lasing of Aqueous-Phase Quantum Dots

Ti 3 C 2 T x MXene Quantum Dots with Enhanced Stability for Ultrafast Photonics

Slope efficiency over 30% single-frequency ytterbium-doped fiber laser based on Sagnac loop mirror filter

Optical modulation of the MXene Ti3C2Tx saturable absorber for Er:Lu2O3 laser