Abstract:Magnetorheological fluids (MRFs) have the excellent comprehensive properties and have widespread applications in lubrication, sealing, vibration reduction and wastewater treatment. When MRFs are used to recover oil from water, the Fe3O4 magnetic nanoparticles (MPs) in MRF are coated by a surfactant which has good hydrophobic and oleophilic properties. After the surfactant fully adsorbs the oil in wastewater, the oil together with MPs can be moved by a magnet. To effectively recycle the oil slick, a magnetorheological fluid was prepared in this work. A core-shell material of Fe3O4 magnetic nanoparticles (MPs) coated by oleic acid (OA) was evenly dispersed in a base fluid. The Fe3O4 MPs was prepared by using the chemical precipitation method and the OA was used to improve the oleophilic and hydrophobic performances of MPs. The structure of Fe3O4 MPs was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), and thermogravimetric analysis (TGA). The results show that nanoparticles have good coating effect of OA and the measured water contact angles after different separation cycles remains at 138 degrees, which means nanoparticles still have good oleophilic and hydrophobic performances. The oil-removal experiments using the MRF were conducted. The mixture of MRF and oil slick floating on water was extracted. After the centrifugal separation and ultrasonic oscillation treatments, the oil and wet precipitate were separated. By mixing the wet precipitate with base fluid, the regenerated MRF is used to recover the oil slick again to investigate the reusability of the MRF. The results indicate that more than 90 % oils slick can be recovered using the prepared MRF and its oil-removal performed well according to the three-times experiments. It is shown that the prepared Fe3O4@OA MRF has a broad prospect in surface oil slick treatment.

Preparation method of kerosene-based magnetic fluid in which oleic-acid-coated nano Fe3O4 disperses

Preparing method of perfluoroalkylpolyether oil-based magnetofluid

Study on the Preparation and the Characteristic of Kerosene Based Magnetic Fluid

Study on the Fluidity Experiments of Engine Oil-Based Magnetic Fluid with Fe3O4/Ag Nanoparticles

Efficient Oil-Water Separation with Amphipathic Magnetic Nanoparticles of Fe3O4@TiO2

Study on preparation and properties of magnetic fluid

Praperation of Fe3O4 hexane ferrofluid with phase-transfer method

Preparation and Characterization of Diesel Fuel-Based Magnetic Fluids

Preparation and stability of magnetite ferrite magnetic fluid

Praperation of Fe_3O_4 Hexane Ferrofluid with Phase-transfer Method

Synthesis of Ferrofluids Using a Chemically Induced Transition Method and Their Characterization

Preparation Technology of Nanosized Magnetic Fluids

Preparation and performance studies of Fe3O4@SiO2 silicon oil based magnetic fluid

Modeling the Effect of Surfactant (linoleic Acid/oleic Acid/stearic Acid) on the Stability of Kerosene-Based Magnetic Fluid with Fe3O4

Preparation and characterization of silicone-oil-based γ-Fe2O3 magnetic fluid

Preparation and Characterization of Polydimethylsiloxane Based Magnetic Fluid

Magnetic Fe3O4 Nanoparticles: Synthesis and Application in Water Treatment

Superhydrophobic Fe3O4/OA Magnetorheological Fluid for Removing Oil Slick from Water Surfaces Effectively and Quickly

Polyol Synthesis of Superparamagnetic Fe_3O_4 Nanoparticles for Magnetic Resonance Imaging

Effective Recovery of Oil Slick Using the Prepared High Hydrophobic and Oleophilic Fe3O4 Magnetorheological Fluid

One-pot preparation of environmentally friendly, high demulsification rate and novel functional magnetic demulsifier: used for oil and water separation in crude oil emulsion