Abstract:Thin film CdTe-based photovoltaic devices have achieved high efficiency above 22 %. The recent improvement in efficiency is due to Se alloying in the CdTe absorbers to form a CdSeTe/CdTe structure. The subsequent band gap grading increases the short circuit current density . The Se can be introduced by depositing a precursor thin film of either CdSe or a CdSeTe alloy and then diffusing the Se into the CdTe during the high temperature cadmium chloride activation process. Using CdSe is preferred because it is easier to control the Se concentration. However, during fabrication of the CdSeTe/CdTe devices, the CdSe thickness needs to be precisely controlled to prevent the retention of a CdSe remnant layer after the activation treatment. Retention of a remnant CdSe layer causes a dramatic reduction in device efficiency. In this work, we show that the reduction in efficiency is caused by a number of factors. The remnant CdSe layer is n-type which moves the position of the p-n junction. Also, it is widely thought that the CdSe remnants are photo-inactive. In this work, we clarify that the individual CdSe grains are actually highly photo-active. However, the grain sizes in the CdSe remnant and the adjacent CdSeTe layer are very small resulting in a high grain boundary area. Although the grain boundaries are passivated with chlorine, cathodoluminescence imaging and electrical measurements show that this is only partially effective. Also, EQE measurements show that the remnant CdSe causes parasitic absorption. Overall, the remnant CdSe layer causes a reduction in short circuit current density and device efficiency. The thickness of the CdSe precursor layer and the cadmium chloride activation process conditions must be precisely optimised to ensure that all the CdSe is consumed and inter-diffused to form the CdSeTe alloy for highest efficiency devices.

Performance of State-of-the-Art CdTe-Based Solar Cells: What Has Changed?

CdTe-based thin film photovoltaics: Recent advances, current challenges and future prospects

20%-efficient polycrystalline Cd(Se,Te) thin-film solar cells with compositional gradient near the front junction

High-efficiency CdTe-based Thin-Film Solar Cells with Unltrathin CdS:O Window Layer and Processes with Post Annealing

As‐Doped Polycrystalline CdSeTe: Localized Defects, Carrier Mobility and Lifetimes, and Impact on High‐Efficiency Solar Cells

Enhancing CdTe Solar Cell Performance by Reducing the "Ideal" Bandgap of CdTe through CdTe1-xSex Alloying

CdTe thin film solar cells with a SnTe buffer layer in back contact

Radiative Efficiency and Charge‐Carrier Lifetimes and Diffusion Length in Polycrystalline CdSeTe Heterostructures

Strategy for Performance Enhancement of Cd1-XZnXTe/CdS Core/shell Quantum Dot Sensitized Solar Cells Through Band Adjustment

Efficient CdTe Nanocrystal/TiO₂ Hetero-Junction Solar Cells with Open Circuit Voltage Breaking 0.8 V by Incorporating A Thin Layer of CdS Nanocrystal

Improving CdTe‐Based Thin‐Film Solar Cell Efficiency with the Oxygenated CdSe Layer Prepared by Sputtering Process

Several Efficiency Influencing Factors in CdTe/CdS Solar Cells

Coevaporated Cd1-xMgxTe Thin Films for CdTe Solar Cells

Highly efficient CdTe solar cell with a thin CIT current booster: theoretical insights

Performance Enhancement of Solar Cells Based on High Photoelectric Conversion Efficiency of H-Bn and Metal Nanoparticles.

Highly Efficient Cadmium telluride Solar Cell with a Thin CuInTe2 Current Booster: Theoretical Insights

Research progress in doped absorber layer of CdTe solar cells

Combined Optical-Electrical Optimization of Cd1-xZnxTe/Silicon Tandem Solar Cells

17.2% Efficient CdSexTe1−x solar cell with (InxGa1−x)2O3 emitter on lightweight and flexible glass

The effect of remnant CdSe layers on the performance of CdSeTe/CdTe photovoltaic devices

Four‐Terminal Perovskite‐CdSeTe Tandem Solar Cells: From 25% toward 30% Power Conversion Efficiency and Beyond