Abstract:In preparation for the forthcoming High-Luminosity phase of the Large Hadron Collider, the ATLAS experiment is working on major upgrades to its detector systems to effectively accommodate the increase in radiation levels and track density. The foremost among these upgrades entails the replacement of the current inner tracking detector with an advanced all-silicon Inner Tracker (ITk). In the outer region of the ITk apparatus is the Strip Detector. Central to the new strip tracking system are the ITk Strip modules, comprising silicon sensors and hybrid Printed Circuit Boards housing the integral read-out Application-Specific Integrated Circuits (ASICs) as well as power distribution services. Thorough characterisation of the electrical characteristics of the silicon strip modules at various stages of the assembly procedure holds paramount significance in evaluating module performance. This rigorous evaluation ensures timely identification of any anomalies, thereby enabling proactive remedial measures. Notably, during the course of these electrical assessments, certain modules manifested breakdown phenomena occurring below the prescribed threshold of 500 V, mandated by the ITk Quality Control protocols. Based on these observations, controlled exposure to low levels of radiation was suspected to elevate the breakdown voltage in susceptible sensors. This contribution presents results from two irradiation campaigns to investigate potentially beneficial effects of irradiation. One study investigates the effects of gamma irradiation on modules showing an early breakdown after gluing. For this study, modules were exposed to an ionising dose of 11 krad (corresponding to the dose accumulated after several days of operation in the HL-LHC) utilising a 60 Co source. The second campaign focuses on silicon sensor test structures with low breakdown voltage due to intentionally caused mechanical defects and their development after exposure to reactor neutrons. In both cases, preliminary findings suggest a discernible improvement in the breakdown voltage.

Additives That Prevent Or Reverse Cathode Aging In Drift Chambers With Helium-Isobutane Gas

Recovery of HADES drift chambers suffering from Malter-like effects

Longevity Studies of CSC Prototypes Operating with Ar+CO$_{2}$ Gas Mixture and Different Fractions of CF$_{4}$

Experimental study of the aging of BESⅢ drift chamber prototype

Aging effect in the BESIII drift chamber

Longevity studies of CSC prototypes operating with Ar+CO gas mixture and different fractions of CF

Aging tests of the proportional wire chambers using Ar/CF4/CH4 (74:20:6), Ar/CF4/CH4 (67:30:3), Ar/CF4/CO2 (65:30:5) mixtures for the HERA-B Muon Detector

Aging suppression in Multistrip Multigap Resistive Plate Chambers for high counting rate experiments

Phase Difference Function in Coherent Temporal-spatial Region and Unified Equations of Steady, Non-steady Interference

Real-time buffer gas pressure tuning in a micro-machined vapor cell

Additively manufactured ultra-high vacuum chamber below $10^{-10}$ mbar

Experimental Study of Accelerated Aging of Small Cell Drift Chamber Prototype with Radioactive Source

Cryogenic loss monitors with FPGA TDC signal processing

Particle-in-cell techniques for the study of space charge effects in the Advanced Cryogenic Gas Stopper

Radiation Tolerance of the LHCb Outer Tracker: in the Lab and in the Forward Region at the LHC

Curing early breakdown in silicon strip sensors with radiation

On the reduction of gas permeation through the glass windows of micromachined vapor cells using Al$_{2}$O$_{3}$ coatings

Study of the effects of radiation on the CMS Drift Tubes Muon Detector for the HL-LHC

Gas related effects on multi-gap RPC performance in high luminosity experiments

Reconfiguring a Plane-Parallel Transmission Ionization Chamber to Extend the Operating Range into the Ultra-High Dose-per-pulse Regime

Draft of PRSTAB paper ELECTRICAL BREAKDOWN OF METALLIC SURFACES