Abstract:This study focuses on the effects of a hybrid reinforcement consisting of nanosized particles of Palm Sprout Shell Ash (PSSA) and silicon carbide (SiC) on the mechanical and tribological properties of the Al-Cu-Mg alloy. Hybrid reinforced composites with different weight percentages of SiC and PSSA (0:0, 0:4, 1:3, 2:2, and 4:0 wt.%) were prepared using the ultrasonic-assisted bottom-poured stir casting technique. SEM and EDS were used to characterize the hybrid composite made of Al-Cu-Mg alloy. Optical and SEM microstructural analyses demonstrated an even distribution of SiC and PSSA nano-reinforcements within the matrix. EDS analysis revealed SiC and PSSA reinforcement in the matrix. The mechanical properties (tensile, flexural, and impact strength) and wear properties of the composites and alloy were evaluated according to the ASTM standards. The hybrid reinforced composites displayed remarkable results compared with the base alloy. Among all composites, the 2:2 wt.% SIC and PSSA hybrid reinforced composite exhibited a significant enhancement in both tensile strength and flexural strength, with a 29.15% increase in tensile strength and a 27.64% increase in flexural strength. However, the inclusion of these reinforcements led to a declined in ductility and impact strength of the Al-Cu-Mg alloy composite. Maximum reductions in ductility and impact strength were observed in the 0:4 wt.% SiC and PSSA-reinforced composites, with decreases of 47.67% and 3.56%, respectively. For the 2:2 wt.% SiC and PSSA composites, these reductions were 23.64% and 3.16%, respectively. The SEM analysis of the fractured surfaces of the composites tested for the mechanical properties revealed evidence of both ductile and brittle fracture mechanisms in the tensile, flexural, and impact tests. The wear behaviour of the prepared samples was evaluated, and all composites exhibited superior performance compared with the base alloy, demonstrating adhesive and abrasive wear mechanisms and varying coefficients of friction.

Silicon carbide-graphite action on characteristics measure of aluminium alloy hybrid nanocomposite

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Effect of Microstructure on Mechanical Behaviors of Al6061 Metal Matrix Composite Reinforced with Silicon Nitride (Si3N4) and Silicon Carbide (SiC) Micro Particles

SiC and MWCNT Blending Actions on Functional Performance of Hybrid AA2024 Alloy Nanocomposite Via Two Step Stir Cast Route

Effects of Silicon Carbide and Tungsten Carbide in Aluminium Metal Matrix Composites

Investigating the Effect of Particle Sizes of SiC and Graphite on Strengthening of Aluminium Metal Matrix Composites

Synergistic Effects of Graphene and Ceria Nanoparticulates on Microstructure and Mechanical Behavior of Stir-Cast Hybrid Aluminum Composite

Implications of SiC/Al2O3 Reinforced Al-Mg-Zn Alloy Hybrid Nano Composites Using Vacuum Sintering Method

Tribological, mechanical and microstructure characteristics of hybrid aluminium matrix composite containing titanium carbide (TiC) and graphite particles

Production and Characterization of Hybrid Al6061 Nanocomposites

A Study On The Effects Of Hybrid (Sic- Pssa) Nano Sized Reinforcement On Mechanical And Tribological Behaviour Of Al Alloy-Based Metal Matrix Composite Produced By Ultrasonic Assisted Stir Casting

Investigation on the effect of SiC and TiB2 ceramic particles on mechanical and tribological properties of Al7075 hybrid metal matrix composites prepared through conventional stir casting technique

Evaluation of Mechanical Properties of Ceramic Reinforced Aluminium-7029 Hybrid Composite

[Application of hormone determination to the diagnosis of pituitary corticotropic adenomas].

Fabrication And Characterization of Al/ Sic/ Gr Hybrid Metal Matrix Composite Fabricated By Powder Metallurgy

Experimental Investigation on Metal Matrix Nanocomposite: Aluminium Alloy 6061 and 7075 with SiC and Fly Ash

Mechanical Properties and Tribological Behavior of Al6061–SiC–Gr Self-Lubricating Hybrid Nanocomposites

Microstructure And Mechanical Properties Of Al-Sic Nanocomposites Synthesized By Surface-Modified Aluminium Powder

Experimental investigation in enhancing the mechanical, wear and corrosion resistance properties of Al6061-SiC-NSA composites fabricated using stir casting process.

Investigation of Mechanical Properties of Aluminium 6061-Silicon Carbide, Boron Carbide Metal Matrix Composite

SiC Blending Behaviour of Hybrid AZ31 Alloy Nanocomposite: Metallographic and Mechanical Studies