Abstract:The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe-soil interaction and thermal insulation. Due to the small-amplitude oscillations driven by the sea state as well as lay vessel motions, the as-laid embedment is significantly greater than the predictions derived from static penetration analyses. This paper presents a numerical study into the cyclic embedment behavior of deep-water pipelines in soft clay using a recently developed sequential limit analysis (SLA) technique. It directly models the evolution of model geometry and material properties through a consecutive series of small displacement analyses and incorporates the effect of strain softening and strain rate on soil strength. A rigid plane-strain pipe section is pushed-in-place and then subjected to small-amplitude cyclic lateral displacements, with an accumulated lateral pipe displacement of up to 60 diameters. Careful comparisons between the numerical results with published centrifuge data are provided to demonstrate the robustness of SLA, in terms of pipe invert trajectory and soil resistance, followed by an extensive parametric study investigating the effect of strain rate, strain softening, oscillation amplitude, and loading history. More detailed aspects of the cyclic loading behavior are discussed with reference to soil failure mechanisms and bearing capacity yield envelopes. A strong correlation between accumulated lateral pipe displacement and pipe embedment is identified, regardless of the varying oscillation amplitudes, and soil buoyancy is found to play the most significant role in determining the final pipe embedment. The present study aims to assist the development of a macro-element plasticity pipe-soil model that can be incorporated into simplified three-dimensional (3D) pipeline-seabed models, as well as to promote the application of SLA to model complex large-displacement pipe-soil interaction problems.

Visualization Investigation of the Plugging Effect on Open-Ended Pipe Pile Jacked in Transparent Sand

Three-Dimensional DEM Simulation of Plugging Behaviour of Small-Diameter Open-Ended Model Piles Penetrating Into Sand

Effect of Soil Set-Up on the Capacity of Jacked Concrete Pipe Piles in Mixed Soils

DEM analysis of the plugging effect of open-ended pile during the installation process

Theoretical study of dynamic pore water pressure dissipation characteristics of open-hole pipe pile

Load Transfer of Offshore Open-Ended Pipe Piles Considering the Effect of Soil Plugging

Research on Plugging Effect of Jacked Prestressed Concrete Pipe Pile

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model tests on pipe pile penetration by using transparent soils

Response of Open-End Pipe Piles to Vertical Dynamic Load Considering the Effects of Soil Plug and Soil Disturbance During Driving

Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis

Case History of Installing Instrumented Jacked Open-Ended Piles

Application of Particle Image Velocimetry (PIV) in the Study of Uplift Mechanisms of Pipe Buried in Medium Dense Sand

Influence of the Penetration of Adjacent X-section Cast-in-place Concrete (XCC) Pile on the Existing XCC Pile in Sand

Dynamic Response of Offshore Open-Ended Pile under Lateral Cyclic Loadings

Finite Element Analysis of Compacting Displacements of Single Jacked Pile

Squeezing Effects Of Jacked Pile In Layered Soil

A novel analytical approach to vertical dynamic vibration of pipe‐pile groups considering soil‐plug effect

Analytical Analysis of Pipeline–soil Interaction During J-lay on a Plastic Seabed with Bearing Resistance Proportional to Depth

COMPARATIVE STUDY OF DYNAMIC SIMULATION FOR COMPACTING DISPLACEMENT OF JACKED PILE AND IN-SITU TEST