Abstract:Electrospray ionization (ESI) mass spectrometry can be divided into three steps: Nebulization of a sample solution into electrically charged droplets, liberation of ions from droplets, and transportation of ions from the atmospheric pressure ionization source region into the vacuum and mass analyzer of the mass spectrometer. A sample solution is fed through a capillary tube and a high electric field at the tip of the tube pulls positive charge towards the liquid front. When electrostatic repulsion becomes stronger than the surface tension, a small electrically charged droplet leaves the surface and travels through the surrounding gas to the counter-electrode. Under the majority of experimental liquid chromatography–mass spectrometry and capillary electrophoresis–mass spectrometry conditions, positive charge on droplets is generated by the removal of negative charge via electrochemical discharge of negative ions against the metal wall of the spray capillary. When the ESI source is set up for the detection of negative ions, all power supplies are at reversed polarity. Removal of positive ions inside the tip of the spray capillary provides droplets depleted of positive charge. The supply of negative charge to the solution may also take place; electrons released from the spray capillary can be captured by sample molecules having a high electron affinity. Droplet size decreases and charge density at the droplet surface increases after droplet disintegration and solvent evaporation. When the electric field at the surface of a droplet has become sufficiently high, ions are emitted from the droplet surface into the surrounding gas and are sampled by the mass analyzer. Sample ion intensity is dependent on ion structure and is affected by solvent composition and presence of additives. ESI behaves as a concentration sensitive detector for chromatography. When the sample concentration is increased above 10 μM, the sample ion signal saturates, which can be explained by the assumption that the surface of ion-emitting droplets is full at 10 μM. Sample ion abundance over a wide m/z range is further affected by inherently mass-dependent efficiencies of ion transportation, ion separation and ion detection.

Electric Field-Modulated Electrospray Ionization Mass Spectrometry for Quantity Calibration and Mass Tracking

Mechanistic aspects of electrospray ionization

On-Demand Mass Spectrometry Analysis by Miniature Mass Spectrometer.

Electrospray Ionization Mass Spectrometry: A Technique to Access the Information beyond the Molecular Weight of the Analyte

A Simplified Electrospray Ionization Source Based On Electrostatic Field Induction For Mass Spectrometric Analysis Of Droplet Samples

Induced Self-aspiration Electrospray Ionization Mass Spectrometry for Flexible Sampling and Analysis.

About the Electrospray Ionization Source in Mass Spectrometry: Electrochemistry and On-chip Reactions

Ion transfer between ion source and mass spectrometer inlet: electro-hydrodynamic simulation and experimental validation

Electrochemical Aspects of Electrospray and Laser Desorption/Ionization for Mass Spectrometry

Practical implications of some recent studies in electrospray ionization fundamentals

Pulsed Electrospray for Mass Spectrometry.

High Accuracy Mass Measurement of Peptides with Internal Calibration Using a Dual Electrospray Ionization Sprayer System for Protein Identification.

Does the Formation of a Taylor Cone in a Pulsating Electrospray Directly Impact Mass Spectrometry Signals?

Time-of-flight mass spectrometry with an electrospray ion beam

Electrostatic-Spray Ionization Mass Spectrometry

Electrostatic Spray Ionization Mass Spectrometry Imaging.

Explore the Feasibility of Electrospray Ionization High-Resolution Mass Spectrometry in Elemental Analysis

Nucleosides as Excellent Molecules for Teaching the Basics and Capabilities of Electrospray Ionization Mass Spectrometry

Dynamics of the Aspiration of Charged Droplets into a LC-ESI-MS System

Exploiting the Native Inspiratory Ability of a Mass Spectrometer to Improve Analysis Efficiency

Digital Ion Trap Isolation and Mass Analysis of Macromolecular Analytes with Multiply Charged Ion Attachment