Abstract:Electrospray ionization (ESI) mass spectrometry can be divided into three steps: Nebulization of a sample solution into electrically charged droplets, liberation of ions from droplets, and transportation of ions from the atmospheric pressure ionization source region into the vacuum and mass analyzer of the mass spectrometer. A sample solution is fed through a capillary tube and a high electric field at the tip of the tube pulls positive charge towards the liquid front. When electrostatic repulsion becomes stronger than the surface tension, a small electrically charged droplet leaves the surface and travels through the surrounding gas to the counter-electrode. Under the majority of experimental liquid chromatography–mass spectrometry and capillary electrophoresis–mass spectrometry conditions, positive charge on droplets is generated by the removal of negative charge via electrochemical discharge of negative ions against the metal wall of the spray capillary. When the ESI source is set up for the detection of negative ions, all power supplies are at reversed polarity. Removal of positive ions inside the tip of the spray capillary provides droplets depleted of positive charge. The supply of negative charge to the solution may also take place; electrons released from the spray capillary can be captured by sample molecules having a high electron affinity. Droplet size decreases and charge density at the droplet surface increases after droplet disintegration and solvent evaporation. When the electric field at the surface of a droplet has become sufficiently high, ions are emitted from the droplet surface into the surrounding gas and are sampled by the mass analyzer. Sample ion intensity is dependent on ion structure and is affected by solvent composition and presence of additives. ESI behaves as a concentration sensitive detector for chromatography. When the sample concentration is increased above 10 μM, the sample ion signal saturates, which can be explained by the assumption that the surface of ion-emitting droplets is full at 10 μM. Sample ion abundance over a wide m/z range is further affected by inherently mass-dependent efficiencies of ion transportation, ion separation and ion detection.

A Simplified Electrospray Ionization Source Based On Electrostatic Field Induction For Mass Spectrometric Analysis Of Droplet Samples

Induced Self-aspiration Electrospray Ionization Mass Spectrometry for Flexible Sampling and Analysis.

Mechanistic aspects of electrospray ionization

Capillary Self-Aspirating Electrospray Ionization (CSESI) for Convenient and Versatile Mass Spectrometry Analysis.

Surface charge-induced electrospray for high-throughput analysis of complex samples and electrochemical reaction intermediates using mass spectrometry

Characterization and application of a self-aspirating electrospray source with pneumatic-assisted ionization

Electrostatic-Spray Ionization Mass Spectrometry

[Preliminary Exploration of Energy Transfer about Sample Ionization Process in Electrospray Ionization Source].

Electroless Ionization Mass Spectrometry Using a Compact Electrokinetic Ionization Source

Pulsed Electrospray for Mass Spectrometry.

Ion transfer between ion source and mass spectrometer inlet: electro-hydrodynamic simulation and experimental validation

Exploiting the Native Inspiratory Ability of a Mass Spectrometer to Improve Analysis Efficiency

On-Demand Portable Paper-Based Electrospray Ionization Mass Spectrometry for High-Sensitivity Analysis of Complex Samples

Developing a Vacuum Electrospray Source to Implement Efficient Atmospheric Sampling for Miniature Ion Trap Mass Spectrometer

On-Demand Mass Spectrometry Analysis by Miniature Mass Spectrometer.

Alleviation of Electrochemical Oxidation for Peptides and Proteins in Electrospray Ionization: Obtaining More Accurate Mass Spectra with Induced High Voltage

About the Electrospray Ionization Source in Mass Spectrometry: Electrochemistry and On-chip Reactions

Arc-Induced Electrospray Ionization Mass Spectrometry.

Dynamics of the Aspiration of Charged Droplets into a LC-ESI-MS System

A 3D-Printed Sub-Atmospheric Pressure Electrospray Ionization Source for Robust, Facile, and Flexible Mass Spectrometry Analysis.

Integrated droplet analysis system with electrospray ionization-mass spectrometry using a hydrophilic tongue-based droplet extraction interface.