Abstract:Ultra-high molecular weight polyethylene (PE) fiber with startling mechanical properties and elastic modulus is considered as an ideal reinforcing component for Ultra-High-Strength and High-Ductility Cementitious Composites (UHS-HDCCs). However, the fiber/matrix interface bonding is weakened due to the hydrophobic nature of the PE fiber surface, restricting the perfect expression of the PE fiber inherent characteristics. In this work, a promising technology for the PE fiber surface functionalization using a combination of bio-inspired polydopamine (PDA) and deposited nano-SiO 2 was proposed to enhance the fiber/matrix interfacial bonding in UHS-HDCCs. The results showed that PDA produced a uniform coating layer on the surface of PE fiber, and nano-SiO 2 was successfully grafted to the surface of PE fiber through PDA as a bridge. The coated PDA and nano-SiO 2 layers enhanced the wettability of the PE fiber surface. Nano-SiO 2 layers provided nucleation sites and reaction raw materials for C–S–H gel. Moreover, the SiO 2 -PDA-PE fibers improved the ultimate tensile stress and tensile strain capacity of UHS-HDCCs to be 116.3% and 133.5% respectively, compared to that of UHS-HDCCs incorporating pristine PE fiber. Furthermore, the SiO 2 -PDA-PE fibers effectively reduced the crack width and crack spacing while increasing the number of cracks and energy absorption capacity of UHS-HDCCs when subjected to increasing uniaxial tensile load. The single fiber pullout results showed that both PDA-PE fibers and SiO 2 -PDA-PE fibers enhanced the peak force, chemical bond, frictional bonding stress, slip hardening coefficient, and pullout energy. Obviously, the positive effect of SiO 2 -PDA-PE fibers on the critical parameters of the fiber interface is higher than that of PDA-PE fibers except for the chemical bond. This work explored a novel way to modify the physicochemical performance of PE fiber surface for matching the strain hardening behavior of UHS-HDCCs, which is meant to guide the mix-design optimization of UHS-HDCCs.

Coating of mussel‐inspired PDA modified SiC whiskers for enhancing the mechanical properties of SLS‐formed TPU parts

Synthesis of High-Toughness Waterborne Polyurethane Utilizing Self-Emulsifying CO2-based Polyols

Preparation of SiO2/Si3N4ws/PU Reinforced Coating and Its Reinforcement Mechanism for SLS-molded TPU Materials

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Mussel-inspired interfacial reinforcement of thermoplastic polyurethane based energetic composites

Mussel-inspired modification of carbon fiber via polyethyleneimine/polydopamine co-deposition for the improved interfacial adhesion

Improved Dielectric Properties of Thermoplastic Polyurethane Elastomer Filled with Core–Shell Structured PDA@TiC Particles

Effect of PE fiber coated by polydopamine and nano-SiO 2 on the strain hardening behavior of Ultra-High-Strength and High-Ductility Cementitious Composites

Enhanced high‐temperature tribological performance of PTFE / PI fabric composites by simultaneously introducing PDA / SiO 2 hybrid coating and aramid product reinforcements

Effect of multidimensional filler hybridization on the mechanical properties of thermoplastic polyurethane composites prepared by selective laser sintering

Mussel Inspired Modification for Aluminum Oxide/Silicone Elastomer Composites with Largely Improved Thermal Conductivity and Low Dielectric Constant

Enhancing Dielectric Properties, Thermal Conductivity, and Mechanical Properties of Poly(lactic acid)–Thermoplastic Polyurethane Blend Composites by Using a SiC–BaTiO3 Hybrid Filler

Poly(methyl dihydroxybenzoate) modified waterborne polyurethane sizing coatings with chemical and hydrogen-bonded complex cross-linking structures for improving the surface wettability and mechanical properties of carbon fiber

Dopamine and silane functionalized barium titanate with improved electromechanical properties for silicone dielectric elastomers

Facile and environment-friendly mussel-inspired surface modification of PBO fibers via dopamine/3-aminopropyltrimethoxysilane co-deposition for advanced composite

Mussel-inspired polyurethane coating for bio-surface functionalization to enhance substrate adhesion and cell biocompatibility

Preparation of a TPU-Based Flexible Stab-Resistant Composite Membrane Filled with SiO 2 and SBR Nanoparticles

Enhancing the Interfacial Property Between UHMWPE Fibers and Epoxy Through Polydopamine and SiO2 Surface Modification

Simple-effective strategy for surface modification via annealing treatment polydopamine coating

Improvement of Mechanical Property for PLA/TPU Blend by Adding PLA-TPU Copolymers Prepared via In Situ Ring-Opening Polymerization

Influence of Amine Chain Extenders on Morphology and Performances of Poly(dimethylsiloxane) Based Poly(urea‐urethane) Elastomers