Abstract:Ag/Al2O3 catalysts containing different precipitable silver compounds (AgCl, Ag2SO4, and Ag3PO4) were synthesized and investigated for NOx reduction in H2-assisted C3H6-selective catalytic reduction (SCR). The samples were systematically characterized by N2 adsorption, X-ray diffraction (XRD), UV–Vis, X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HR-TEM). N2 adsorption revealed that the introduction of anions (Cl–, SO42–, and PO43–) did not significantly affect the surface and structural properties of the Al2O3 support. However, XRD patterns and HR-TEM images indicated that the addition of Cl– anions caused the agglomeration of silver species to form large AgCl particles on the AgCl/Al2O3 catalysts. In contrast, the silver species dispersed well on Ag2SO4/Al2O3 and Ag3PO4/Al2O3 catalysts. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) revealed that partial oxidation of C3H6 on Ag2SO4/Al2O3 produced large amounts of reactive enolic species, while it tended to yield inert formate on AgCl/Al2O3. As a result, Ag2SO4/Al2O3 catalysts, especially 3% Ag2SO4/Al2O3, exhibited superior water and sulfur tolerance in H2-assisted C3H6-SCR.This article has not yet been cited by other publications.

Investigation of Water and Sulfur Tolerance of Precipitable Silver Compound Ag/Al 2 O 3 Catalysts in H 2 -Assisted C 3 H 6 -SCR of NO x

Behavior of Different Silver Species in the Selective Reduction of Nox by Ch4 over Ag-Hzsm-5 Catalyst

γ-Al2O3 supported silver nanoparticle applied in C3H8-SCR: Nanosphere and nanoflake

Investigation on the Catalytic Roles of Silver Species in the Selective Catalytic Reduction of NOx with Methane

Coll 448-The So2 Effect On Ag-Based Catalysts With Various Supports Of Al2o3, Tio2, And Tio2-Al2o3 For No Reduction In Lean Burn Condition

Understanding the high performance of an iron-antimony binary metal oxide catalyst in selective catalytic reduction of nitric oxide with ammonia and its tolerance of water/sulfur dioxide

Improvement of Catalytic Activity and Sulfur-Resistance of Ag/TiO2–Al2O3 for NO Reduction with Propene under Lean Burn Conditions

Preparation of Ag/ Al2O3 Selective Catalytic Reduction Monolithic Catalyst

Investigation of the effect of bimetallic Zn-Mg modified Al2O3 carriers modulating Ag species on the performance of H2-assisted C3H6-SCR and the mechanism

Selective Catalytic Reduction of No in the Presence of Excess Oxygen I Center Dot Scr of No with C3h6 over Ag/Al2o3

Effects of SO2 on NO reduction with methanol over Ag/Al2O3 catalyst]

Catalytic performance of Ag/Al2O3-C2H5OH-Cu/Al2O3 system for the removal of NOx from diesel engine exhaust.

Preparation of the Coupling Co-Precipitation and Impregnation Catalyst Ag/Al₂O₃ with High Catalytic Performance in Selective Catalytic Reduction of NO with C₃H6.

Resistance to Sulfidation of the Catalytic Reduction of Nox over Ag/Al2o3 by Controlling the Loadings of Ag and Ag+

Influence of preparation methods on selective catalytic reduction of nitric oxides by propene over silver–alumina catalyst

Excellent sulfur tolerance performance over Fe-SO4/TiO2 catalysts for NH3-SCR: Influence of sulfation and Fe-based sulfates

Development of SSZ-13 Based Sulfur Resistant NH 3 -SCR Catalysts

Enhancing the activity and sulfur resistance of CuFeAlO x catalyst via the structure effect for the simultaneous removal of Hg 0 and NO at wide temperature

Selective Catalytic Reduction of NO X from Exhaust of Lean-Burn Engine over Ag-Al 2 O 3 /cordierite Catalyst

On the correlation between microstructural changes of Ag-H-ZSM-5 catalysts and their catalytic performances in the selective catalytic reduction of NOx by methane

In situ DRIFTS and DFT studies of SO2 poisoning over Cu-exchanged X zeolite catalyst for NH3-SCR