Abstract:Most optical spectropolarimeters built to date operate as long-slit or point-source instruments; they are inefficient for observations of extended objects such as galaxies and nebulae. 2D spectropolarimetry technique development is a major challenge in astronomical instrumentation. At the South African Astronomical Observatory (SAAO) FiberLab, we are developing a spectropolarimetry capable Integral Field front-end called FiberPol(-6D) for the existing SpUpNIC spectrograph on the SAAO 1.9 m telescope. SpUpNIC is a general purpose 2 arc-minute long-slit spectrograph with a grating suite covering the wavelength range from 350 to 1000 nm and at spectral resolutions between 500 and 6000. FiberPol generates 6D observational data: x-y spatial dimensions, wavelength, and the three linear Stokes parameters $I$, $q$ and $u$. Using a rotating half-wave plate and a Wollaston prism, FiberPol executes two-channel polarimetry, and each channel is fed to an array of 14 fibers, corresponding to a field of view of $10\times20~arcseconds^2$ sampled with 2.9 arcsecond diameter fiber cores. These fiber arrays are then rerouted to form a pseudo-slit input to SpUpNIC. FiberPol aims to achieve a polarimetric accuracy of 0.1 % per spectral resolution bin. Further, it can also function as a non-polarimetric integral-field unit. The instrument design has been completed and it is currently being assembled and characterized in the lab. It is scheduled for on-sky commissioning in the second half of 2024. In this paper, we present the scientific and technical goals of FiberPol, its overall design and initial results from the lab assembly and testing. FiberPol is a low cost technology demonstrator, and the entire system predominantly employs small size, commercial off-the-shelve optics and optomechanical components. It can be modified and replicated for use on any existing spectrograph, especially on bigger telescopes.

SPIRAL Phase A: A Prototype Integral Field Spectrograph for the AAT

HIGH-PRECISION ASTROMETRY WITH A DIFFRACTIVE PUPIL TELESCOPE

The Wide Field Spectrograph (WiFeS)

FiberPol-6D: Spectropolarimetric Integral Field mode for the SAAO 1.9 m Telescope using fibers

Diffraction-limited integral-field spectroscopy for extreme adaptive optics systems with the Multi-Core fiber-fed Integral-Field Unit

An angle-scanned cryogenic Fabry-Pérot interferometer for far-infrared astronomy

Final Design and On-Sky Testing of the iLocater SX Acquisition Camera: Broadband Single-Mode Fiber Coupling

Mapping the aberrations of a wide-field spectrograph using a photonic comb

The Anglo-Australian Observatory's 2dF Facility

Early Commissioning Results of Slit Mask Integral Field Units on the Southern African Large Telescope

Image Slicing with Infrared Fibers

ATLAS: a Cassegrain spectrograph based on volume phase holographic gratings

Final design and on-sky testing of the iLocater SX acquisition camera: broad-band single-mode fibre coupling

The Large Sky Area Multi-Object Fibre Spectroscopy Telescope (Lamost) Project

A radio astronomy L-band phased array feed system using RF over fiber distribution

First on-sky results of a FIOS prototype, a Fabry Perot Based Instrument for Oxygen Searches

Hector - a new massively multiplexed IFS instrument for the Anglo-Australian Telescope

The ERA2 facility: towards application of a fiber-based astronomical spectrograph for imaging spectroscopy in life sciences

MIFS: A Mega Integral Field Spectrograph for the VLT

Apertif - the focal-plane array system for the WSRT

Development of the single-mode fiber integral field unit for the RHEA Spectrograph