Abstract:This paper presents a mixed-signal SRAM-based in-memory computing (IMC) macro for processing binarized neural networks. The IMC macro consists of $128\times 128$ (16K) SRAM-based bitcells. Each bitcell consists of a standard 6T SRAM bitcell, an XNOR-based binary multiplier, and a pseudo-differential voltage-mode driver (i.e., an accumulator unit). Multiply-and-accumulate (MAC) operations between 64 pairs of inputs and weights (stored in the first 64 SRAM bitcells) are performed in 128 rows of the macro, all in parallel. A weight-stationary architecture, which minimizes off-chip memory accesses, effectively reduces energy-hungry data communications. A row-by-row analog-to-digital converter (ADC) based on 32 replica bitcells and a sense amplifier reduces the ADC area overhead and compensates for nonlinearity and variation. The ADC converts the MAC result from each row to an N-bit digital output taking 2N-1 cycles per conversion by sweeping the reference level of 32 replica bitcells. The remaining 32 replica bitcells in the row are utilized for offset calibration. In addition, this paper presents a pseudo-differential voltage-mode accumulator to address issues in the current-mode or single-ended voltage-mode accumulator. A test chip including a 16Kbit SRAM IMC bitcell array is fabricated using a 65nm CMOS technology. The measured energy- and area-efficiency is 741-87TOPS/W with 1-5bit ADC at 0.5V supply and 3.97TOPS/mm2, respectively.

Transposable 9T-SRAM Computation-In-Memory for on-Chip Learning With Probability-Based Single-Slope SAR Hybrid ADC for Edge Devices

A Robust 8-Bit Non-Volatile Computing-in-Memory Core for Low-Power Parallel MAC Operations.

A 4-Kb 1-to-8-bit Configurable 6T SRAM-Based Computation-in-Memory Unit-Macro for CNN-Based AI Edge Processors

24.5 A Twin-8T SRAM Computation-In-Memory Macro for Multiple-Bit CNN-Based Machine Learning

An SRAM Compute-In-Memory Macro Based on Direct Coupling SAR ADC and DAC Reuse

A Twin-8T SRAM Computation-in-Memory Unit-Macro for Multibit CNN-Based AI Edge Processors

An XOR-10T SRAM computing-in-memory macro with current MAC operations and time-to-digital conversion for BNN edge processors

An ADC-less RRAM-based Computing-in-Memory Macro with Binary CNN for Efficient Edge AI

CAP-RAM: A Charge-Domain In-Memory Computing 6T-SRAM for Accurate and Precision-Programmable CNN Inference

A 128 Kb DAC-less 6T SRAM computing-in-memory macro with prioritized subranging ADC for AI edge applications

SSM-CIM: an Efficient CIM Macro Featuring Single-Step Multi-bit MAC Computation for CNN Edge Inference

A 28nm 32kb SRAM Computing-in-Memory Macro with Hierarchical Capacity Attenuator and Input Sparsity-Optimized ADC for 4b Mac Operation

A 28-Nm RRAM Computing-in-Memory Macro Using Weighted Hybrid 2T1R Cell Array and Reference Subtracting Sense Amplifier for AI Edge Inference

A Charge Domain P-8T SRAM Compute-In-Memory with Low-Cost DAC/ADC Operation for 4-bit Input Processing

A Multiply-Less Approximate SRAM Compute-In-Memory Macro for Neural-Network Inference

A 28nm 8Kb Reconfigurable SRAM Computing-In-Memory Macro With Input-Sparsity Optimized DTC for Multi-mode MAC Operations

A 1–8b Reconfigurable Digital SRAM Compute-in-Memory Macro for Processing Neural Networks

An 11T1C Bit-Level-Sparsity-Aware Computing-in-Memory Macro with Adaptive Conversion Time and Computation Voltage

A 137.5 TOPS/W SRAM Compute-in-Memory Macro with 9-b Memory Cell-Embedded ADCs and Signal Margin Enhancement Techniques for AI Edge Applications

A 1-16b Reconfigurable 80Kb 7T SRAM-Based Digital Near-Memory Computing Macro for Processing Neural Networks

SRAM-Based In-Memory Computing Macro Featuring Voltage-Mode Accumulator and Row-by-Row ADC for Processing Neural Networks