Abstract:This paper presents a mixed-signal SRAM-based in-memory computing (IMC) macro for processing binarized neural networks. The IMC macro consists of $128\times 128$ (16K) SRAM-based bitcells. Each bitcell consists of a standard 6T SRAM bitcell, an XNOR-based binary multiplier, and a pseudo-differential voltage-mode driver (i.e., an accumulator unit). Multiply-and-accumulate (MAC) operations between 64 pairs of inputs and weights (stored in the first 64 SRAM bitcells) are performed in 128 rows of the macro, all in parallel. A weight-stationary architecture, which minimizes off-chip memory accesses, effectively reduces energy-hungry data communications. A row-by-row analog-to-digital converter (ADC) based on 32 replica bitcells and a sense amplifier reduces the ADC area overhead and compensates for nonlinearity and variation. The ADC converts the MAC result from each row to an N-bit digital output taking 2N-1 cycles per conversion by sweeping the reference level of 32 replica bitcells. The remaining 32 replica bitcells in the row are utilized for offset calibration. In addition, this paper presents a pseudo-differential voltage-mode accumulator to address issues in the current-mode or single-ended voltage-mode accumulator. A test chip including a 16Kbit SRAM IMC bitcell array is fabricated using a 65nm CMOS technology. The measured energy- and area-efficiency is 741-87TOPS/W with 1-5bit ADC at 0.5V supply and 3.97TOPS/mm2, respectively.

A 1–8b Reconfigurable Digital SRAM Compute-in-Memory Macro for Processing Neural Networks

A Low-Power In-Memory Multiplication and Accumulation Array with Modified Radix-4 Input and Canonical Signed Digit Weights

A 1-16b Reconfigurable 80Kb 7T SRAM-Based Digital Near-Memory Computing Macro for Processing Neural Networks

A 28nm 8Kb Reconfigurable SRAM Computing-In-Memory Macro With Input-Sparsity Optimized DTC for Multi-mode MAC Operations

A Multiply-Less Approximate SRAM Compute-In-Memory Macro for Neural-Network Inference

A High-Density and Reconfigurable SRAM-Based Digital Compute-In-Memory Macro for Low-Power AI Chips.

7.3 A 28nm 38-to-102-tops/w 8b Multiply-Less Approximate Digital SRAM Compute-In-Memory Macro for Neural-Network Inference

A 4-Kb 1-to-8-bit Configurable 6T SRAM-Based Computation-in-Memory Unit-Macro for CNN-Based AI Edge Processors

A Dual-Wordline 6T SRAM Computing-In-Memory Macro Featuring Full Signed Multi-Bit Computation for Lightweight Networks

34.3 A 22nm 64kb Lightning-Like Hybrid Computing-in-Memory Macro with a Compressed Adder Tree and Analog-Storage Quantizers for Transformer and CNNs.

A 28nm 32kb SRAM Computing-in-Memory Macro with Hierarchical Capacity Attenuator and Input Sparsity-Optimized ADC for 4b Mac Operation

A 128 Kb DAC-less 6T SRAM computing-in-memory macro with prioritized subranging ADC for AI edge applications

A Reconfigurable SRAM Computing-in-Memory Macro Supporting Ping-Pong Operation and CIM Pipeline for Multi-mode MAC Operations

A 16.38TOPS and 4.55POPS/W SRAM Computing-in-Memory Macro for Signed Operands Computation and Batch Normalization Implementation

A Dual-Split 6T SRAM-Based Computing-in-Memory Unit-Macro With Fully Parallel Product-Sum Operation for Binarized DNN Edge Processors

A Twin-8T SRAM Computation-in-Memory Unit-Macro for Multibit CNN-Based AI Edge Processors

An 8T SRAM Based Digital Compute-In-Memory Macro For Multiply-And-Accumulate Accelerating.

SRAM-Based In-Memory Computing Macro Featuring Voltage-Mode Accumulator and Row-by-Row ADC for Processing Neural Networks

An XOR-10T SRAM computing-in-memory macro with current MAC operations and time-to-digital conversion for BNN edge processors

An RRAM-Based Digital Computing-in-Memory Macro with Dynamic Voltage Sense Amplifier and Sparse-Aware Approximate Adder Tree

A 28-Nm RRAM Computing-in-Memory Macro Using Weighted Hybrid 2T1R Cell Array and Reference Subtracting Sense Amplifier for AI Edge Inference