Abstract:Additive manufacturing (AM) is an emerging method for cost-efficient fabrication of nuclear reactor parts. AM of metallic structures for nuclear energy applications is currently based on laser powder bed fusion (LPBF) process, which can introduce internal material flaws, such as pores and anisotropy. Integrity of AM structures needs to be evaluated nondestructively because material flaws could lead to premature failures due to exposure to high temperature, radiation and corrosive environment in a nuclear reactor. Quality control (QC) requires nondestructive evaluation (NDE) of actual AM structures. Pulsed thermography is a potentially promising QC technique because it is scalable to arbitrary structure size. However, detection sensitivity of this method is limited by noises. We investigate separation of signal from noise in thermography images using several machine learning (ML) methods, including new spatio-temporal blind source separation (STBSS) and spatio-temporal sparse dictionary learning (STSDL) methods. Performance of the ML methods is benchmarked using thermography data obtained from imaging stainless steel 316L and Inconel 718 specimens produced LPBF method with imprinted calibrated porosity defects. The ML methods are ranked by F-score and execution runtime. The ML methods with higher accuracy require longer run time. However, this runtime is sufficiently short to perform QC within a realistic time frame. specimen with the flash lamp. In addition, because detection of flaws is based on heat diffusion, contrast of “hot spots” is reduced due to blurring. In this paper, we investigate separation of signal from noise to enhance material flaw detection in thermography images using several machine learning (ML) methods. Performance of the ML methods is evaluated using the data cube obtained from flash thermography imaging of AM specimens. The specimens used in this study are SS316L and INC718 plates produced with LPBF method, which contain imprinted calibrated porosity defects of various sizes. The ML methods developed and demonstrated in this paper are Spatial-Temporal Blind Source Separation (STBSS) and Spatial-Temporal Sparse Dictionary Learning (STSDL). The STBBS method is developed by combining wavelet-based de-noising with neural learning-based Blind Source Separation (NLBSS) algorithm. The NLBSS method developed recently for ML of thermography images, is based on combining the principal component analysis (PCA) and independent component analysis (ICA), which is implemented as a two-layer neural network. The STSDL method is similarly developed by combining wavelet-based de-noising with the sparse dictionary learning (SDL) method. Performance of the ML methods, as well as the previously developed NLBSS, and established PCA, ICA and SDL methods in detection of flaws in flash thermography data is ranked by F-score and algorithm execution runtime. Results of this paper indicate that STBSS and STSDL outperform existing methods in their capability of defects detection, albeit at the expense of increased runtime. However, the time to perform flash thermography measurements and ML analysis of images is sufficiently short for implementation of these methods in a realistic QC procedure.

Imaging of Calibrated Defects in Additively Manufactured Materials: Pulsed Thermal Tomography Nondestructive Examination of Additively Manufactured Reactor Materials and Components

Performance Validation of Pulsed Thermal Imaging System for In-Service Applications

PTT System Performance Evaluation in 3-D Imaging of AM Components

Performance of Compact Pulsed Thermal Imaging System for In-Service Applications

Detection of Defects in Additively Manufactured Metallic Materials with Machine Learning of Pulsed Thermography Images

Thermal Tomography 3D Imaging of Additively Manufactured Metallic Structures

Report on PTT Imaging of Defects in AM Metallic Materials-Part 2

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

Spatial Temporal Denoised Thermal Source Separation in Images of Compact Pulsed Thermography System for Qualification of Additively Manufactured Metals

Development of an Additive Manufactured Artifact to Characterize Unfused Powder Using Computed Tomography

Advances in Neutron Radiography: Application to Additive Manufacturing Inconel 718

Neural Learning Based Blind Source Separation for Detection of Material Defects in Pulsed Thermography Images

Development of Production Eddy Current Inspection Process for Additively Manufactured Industrial Gas Turbine Engine Components

Detectability by X-ray micro computed tomography of fatigue initiating void defects in laser powder-bed additively manufactured Ti-6Al-4V coupons

Electromagnetic Non-Destructive Evaluation for Safety Critical Components and Material

Comparison of Digital Radiography and Computed Tomography as Nondestructive Testing Techniques for the Assessment of Lack of Fusion Defects in Additively Manufactured SS316L Coupon

Detection of Defects in Additively Manufactured Stainless Steel 316L with Compact Infrared Camera and Machine Learning Algorithms

In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing

Real-Time Nondestructive Evaluation of Additive Manufacturing Using a Laser Vibrometer and Shock Tube

Efficient volumetric non-destructive testing methods for additively manufactured parts

Quantitative Evaluation of Crack Depths on Thin Aluminum Plate using Eddy Current Pulse-Compression Thermography