Abstract:Plasma transferred arc additive manufacturing (PTA-AM) is a high volume and high speed directed energy deposition (DED) technique that uses metal powder as a feedstock material to build up 3-dimensional (3D) components, layer by layer. In the PTA-AM process, the quality of the build is a function of several parameters, including but not limited to the powder feed rate, the torch travel speed, stand-off distance (SOD), and plasma arc current. Unlike the laser DED systems, the melt pool and laser visualization are not possible through inline imaging systems. These processes have difficulty sustaining uniform evenly distributed powder flow between the nozzle and the substrate. For the constant operating parameters, the process requires in-depth attention to inspect the quality and geometrical features of bead deposition, which may alter due to continuous mechanical connection with the deposition process. Surprisingly, no work is reported in plasma-based DED systems to determine the process parameter influence on build quality using image processing technique. Therefore, in this work, high-speed imaging is employed to analyze and quantify the process parameters of the PTA-AM and their effects on the bead quality and geometry. The experiments of single-track multi-layer bead deposition of Tungsten Carbide (WC)-reinforced NiCrBSi composites are carried out and recorded with a high-speed camera. Based on captured 2D image data, the image processing techniques are developed using Matlab and Image-Pro premier software. The proposed techniques optimize and validate the SOD to print the stable bead and maintain the higher powder catchment efficiency at the deposition zone. It is also used to assess the process stability (uniform powder flow) and the impact of powder flow variation on the bead height. The powder stream distribution, the statistical dispersion of powder particle count, and their effect on the build quality are described based on powder flow images, using an image processing approach. The significance of relationships between bead height variation and powder particle counts is analyzed using statistical methodologies such as analysis of variance (ANOVA) and two-tailed t-test. The effect of PTA-AM process parameters on bead geometry reveals that the plasma arc current and powder particle count significantly affect the bead geometry. This work validates the benefit of using 7-mm SOD for improving part quality. Using image analysis, the uniformity of powder flow is evaluated. In addition, the finding shows that the increment in plasma current by 40% increases the mean bead width by 85% and decreases its height by 24%. By determining the effect of processing parameters on the bead quality and geometry, this PTA-AM process can build near-net-shape parts and increase the reliability and reproducibility of the process. Thus, the proposed in situ image processing methods can be adopted in the PTA-AM process to analyze manufactured parts’ quality and characterize the process parameters responsible for the deviation in surface quality and dimensional geometry.

PTT System Performance Evaluation in 3-D Imaging of AM Components

Study on Industrial Computed Tomography Detection and Identification of Inclusion Defects in Thick-Wall Polyethylene Pipe Butt Fusion Joint Within Nuclear Power Plant

Development of Production Eddy Current Inspection Process for Additively Manufactured Industrial Gas Turbine Engine Components

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

In situ image processing for process parameter-build quality dependency of plasma transferred arc additive manufacturing

Comparison of Digital Radiography and Computed Tomography as Nondestructive Testing Techniques for the Assessment of Lack of Fusion Defects in Additively Manufactured SS316L Coupon

Development of an Additive Manufactured Artifact to Characterize Unfused Powder Using Computed Tomography

Investigation of reconstructed three-dimensional active infrared thermography of buried defects: multiphysics finite elements modelling investigation with initial experimental validation

In-Situ Monitoring for Defect Identification in Nickel Alloy Complex Geometries Fabricated by L-PBF Additive Manufacturing

Investigation of microstructure in additive manufactured Inconel 625 by spatially resolved neutron transmission spectroscopy

Detection of Defects in Additively Manufactured Stainless Steel 316L with Compact Infrared Camera and Machine Learning Algorithms

Unsupervised learning-enabled pulsed infrared thermographic microscopy of subsurface defects in stainless steel

Complementary Methods for the Assessment of the Porosity of Laser Additive-Manufactured Titanium Alloy

Qualification Pathways for Additively Manufactured Components for Nuclear Applications

Application of Ultrasonic Array Method for the Inspection of TC18 Addictive Manufacturing Titanium Alloy

Efficient volumetric non-destructive testing methods for additively manufactured parts

Nondestructive Testing of 3D Printed Fiber-Reinforced Polymeric Composites: An Experimental Critical Comparison

Automated Defect Recognition for Additive Manufactured Parts Using Machine Perception and Visual Saliency

Cost-effective micro-CT system for non-destructive testing of titanium 3D printed medical components

Analysis of data processing methods for pulsed thermal imaging characterisation of delaminations

A highly efficient computational approach for fast scan-resolved simulations of metal additive manufacturing processes on the scale of real parts