Abstract:Cardiovascular diseases are currently the major causes of mortality in the world, especially in developed nations. As a predominant one, thrombosis is the platelet aggregation induced by a high shear rate. Platelet aggregation assay can clarify the occurrence mechanism of thrombosis, as well as be used as an important tool in the clinical diagnosis, personalized treatment, and screening of anticoagulants. Thus, relevant studies attracted considerable attention. As an important step in platelet aggregation, platelet adhesion and its detection also attract intensive concern. Thus, some analytical methods have been developed for platelet adhesion assay, and the impact of shear rate is one of the focuses. Compared with other devices, biosensors can give a more accurate result within a shorter time. Furthermore, some biosensors can achieve real-time analysis. However, only one or several shear rates can be tested at the same time, which may decrease the analytical efficiency. Meanwhile, in most cases, only the average platelet adhesion effect within a reactor is detected, and the impact of the distribution of shear rates is improperly neglected. In this study, a microfluidic device with a single channel is designed and fabricated for platelet adhesion assay. When the platelet-rich plasma flows through the collagen-modified sensing surface of the channel bottom, the interaction between platelets and collagen molecules on the entire surface can be simultaneously monitored by using a surface plasmon resonance imaging (SPRi) system. A gradient of the shear rate (0–546 s-1) could be formed within the channel by choosing a suitable depth-to-width ratio (1:5), so platelet adhesion at multiple shear rates could be monitored simultaneously. This method enables the measurement of the adhesion process of unlabeled platelets on the entire sensing surface, in vitro, at multiple shear rates. Such a system can obtain more accurate platelet adhesion result at a given shear rate than traditional methods. Furthermore, in an individual operation, platelet adhesion can be repeatedly tested at multiple points with an equal shear rate, so a much higher analytical efficiency can also be achieved.

A QCM-Based Lab-on-a-Chip Device for Real Time Characterization of Shear-Induced Platelets Adhesion and Aggregation

A microfluidic hemostatic diagnostics platform: Harnessing coagulation-induced adaptive-bubble behavioral perception

A Microfluidic Device For Platelet Aggregation Assay

Simultaneous Assay of Platelet Adhesion at Multiple Shear Rates Within a Single Microfluidic Channel

Integrated microfluidic multiple electrode aggregometry for point-of-care platelet function analysis

Real-Time Monitoring of Platelet Activation Using Quartz Thickness-Shear Mode Resonator Sensors

The Development and Application of A Flow Chamber for Platelet Research

Thrombogenicity of Microfluidic Chip Surface Manipulation: Facile, One-Step, None-Protein Technique for Extreme Wettability Contrast Micropatterning

Comprehensive Multiparameter Evaluation of Platelet Function Using a Highly Sensitive Membrane Capacitance Sensor

Use of non-contact hopping probe ion conductance microscopy to investigate dynamic morphology of live platelets.

CuO NWs boosted triboelectric microfluidic nanosensor functionalized by collagen-protein interactions for real-time platelet count monitoring

Blood platelet enrichment in mass-producible surface acoustic wave (SAW) driven microfluidic chips

From Chips-in-Lab to Point-of-Care Live Cell Device: Development of a Microfluidic Device for On-Site Cell Culture and High-Throughput Drug Screening

A Microfluidic Platform Integrating Dynamic Cell Culture and Dielectrophoretic Manipulation for in Situ Assessment of Endothelial Cell Mechanics

Design of a Microfluidic Chip System Based on Magnetoelastic Sensors for Blood Coagulation Measurement

Microclot array elastometry for integrated measurement of thrombus formation and clot biomechanics under fluid shear

A Novel Microfluidic Chip for Assessing Dynamic Adhesion Behavior of Cell-Targeting Microbubbles

In microfluidico: Recreating in vivo hemodynamics using miniaturized devices.

Functional Platelet Aggregation Analysis Using Digital Optofluidic Scattering Quantitation

Hemodynamic Mimic Shear Stress for Platelet Membrane Nanobubbles Preparation and Integrin Αiibβ3 Conformation Regulation