Embeddedness of minimal surfaces with total boundary curvature at most 4π

Tobias Ekholm,Brian White,Daniel Wienholtz

2004-05-25

Abstract: This paper proves that classical minimal surfaces of arbitrary topological type with total boundary curvature at most 4\pi must be smoothly embedded. Related results are proved for varifolds and for soap film surfaces.

Differential Geometry

What problem does this paper attempt to address?

Embedded minimal surfaces in $\mathbb{S}^3$ and $\mathbb{B}^3$ via equivariant eigenvalue optimization

Mikhail Karpukhin,Robert Kusner,Peter McGrath,Daniel Stern

2024-02-21

Abstract:In 1970, Lawson solved the topological realization problem for minimal surfaces in the sphere, showing that any closed orientable surface can be minimally embedded in $\mathbb{S}^3$. The analogous problem for surfaces with boundary was posed by Fraser and Li in 2014, and it has attracted much attention in recent years, stimulating the development of many new constructions for free boundary minimal surfaces. In this paper, we resolve this problem by showing that any compact orientable surface with boundary can be embedded in $\mathbb{B}^3$ as a free boundary minimal surface with area below $2\pi$. Furthermore, we show that the number of minimal surfaces in $\mathbb{S}^3$ of prescribed topology and area below $8\pi$, and the number of free boundary minimal surfaces in $\mathbb{B}^3$ with prescribed topology and area below $2\pi$, grow at least linearly with the genus. This is achieved via a new method for producing minimal surfaces of prescribed topology in low-dimensional balls and spheres, based on the optimization of Laplace and Steklov eigenvalues in the presence of a discrete symmetry group. As a key ingredient, we develop new techniques for proving the existence of maximizing metrics, which can be used to resolve the existence problem in many symmetric situations and provide at least partial existence results for classical eigenvalue optimization problems.

Differential Geometry,Spectral Theory,Analysis of PDEs
Bernstein Type Theorems for Minimal Surfaces in $(\Alpha,\beta)$-Space

Ningwei Cui,Yi-Bing Shen

DOI: https://doi.org/10.5486/pmd.2009.4443

2009-01-01

Publicationes Mathematicae Debrecen

Abstract:Let Vn+1 be an (n + 1)-dimensional real vector space and (F) over tilde = (alpha) over tilde phi(s) s = (beta) over tilde/(alpha) over tilde, be all (alpha, beta)-metric, where (alpha) over tilde is an Euclidean metric and (beta) over tilde is a one form. Minimal surfaces with respect to the Busemann-Hausdorff measure and the Holmes-Thompson measure are called BH-minimal and HT-minimal surfaces, respectively. We give a Bernstein type theorem for minimal graphs in (Vn+1, (F) over tilde) with n <= 7. Let (F) over tilde (b) = (alpha) over tilde phi(s), s = (beta) over tilde/(alpha) over tilde, be a Minkowski metric with b := parallel to(beta) over tilde parallel to(alpha) over tilde. We use a PDE to characterize the BH-minimal and HT-minimal graph over any hyperplane containing the origin in (Vn+1, (F) over tilde (b)). Then we prove that this PDE is an elliptic equation of mean curvature type when b is an element of [0, is an element of) for sonic constant is an element of > 0 and give a Bernstein type theorem for BH-minimal surface in (V-3, (F) over tilde (b)). BH-minimal cones with an isolated singularity at the origin are also given.
Embeddedness of least area minimal hypersurfaces

Antoine Song

DOI: https://doi.org/10.48550/arXiv.1511.02844

2016-12-07

Abstract:E. Calabi and J. Cao showed that a closed geodesic of least length in a two-sphere with nonnegative curvature is always simple. Using min-max theory, we prove that for some higher dimensions, this result holds without assumptions on the curvature. More precisely, in a closed $(n+1)$-manifold with $2 \leq n \leq 6$, a least area closed minimal hypersurface exists and any such hypersurface is embedded. As an application, we give a short proof of the fact that if a closed three-manifold $M$ has scalar curvature at least $6$ and is not isometric to the round three-sphere, then $M$ contains an embedded closed minimal surface of area less than $4\pi$. This confirms a conjecture of F. C. Marques and A. Neves.

Differential Geometry
The Topological Uniqueness of Complete Minimal Surfaces of Finite Topological Type

WH MEEKS,ST YAU

DOI: https://doi.org/10.1016/0040-9383(92)90023-b

1992-01-01

Topology

Abstract:IN 1970 Lawson [22] proved that two embedded closed diffeomorphic minimal surfaces in the unit three-dimensional sphere S3 in lRJ are ambiently isotopic in S3. Lawson proved this theorem by first proving that an embedded orientable closed minimal surface of genus y in a closed orientable Riemannian three-manifold M’ with positive Ricci curvature disconnects M-’ into two genus-8 handlebodics. A result of Frankel [7] was used to prove this. Lawson then applied a deep result of Waldhauscn [33] that states that decompositions of SJ into two genus-cl handlebodies arc unique up to ambient isotopy. More prcciscly. Waldhauscn’s uniqucncss thcorcm states that whenever a closed surface of genus y in S” separates SJ into handlcbodics, then the embedding of the surface is as simple as possible; in other words, the surface is obtained from a two-sphere Sz c S’ by adding handles in an unknotted manner. Mccks [23] gcncralizcd Lawson’s argument to the case of oricntablc closed minimal surfaces in a closed ,V3 with nonnegative Ricci curvature. Meek’s result and another topological uniqueness result of Waldhauscn [33] implies that two closed diffeomorphic minimal surfaces in S2 x S’ with the usual product metric arc ambiently isotopic. Finally, Meeks-Simon-Yau [25] proved that if X is a closed minimal surface in S’ equipped with a metric of non-negative scalar curvature, then X disconnects S3 into two handlebodies and hence dctcrmincs a unique ambient class in S’. In [23] Mceks considered the problem of the topological uniqueness of minimal surfaces in three-dimensional Euclidean space. In particular, Meeks proved that any two compact diffeomorphic minimal surfaces, with boundary a simple closed curve on the boundary of a smooth convex ball, are ambiently isotopic in the ball. Later Hall [I33 showed that there exist two simple closed curves on the unit sphere S* that bound a knotted minimal surface of genus one. In this paper we will use global properties of stable minimal surfaces in [w’ to prove: A properly embedded minimal surface of finite topological type in R’ is unknotted. In particular, if X, and IEz are two such diffeomorphic surfaces, then they are ambiently isotopic. This is the main result of our paper and it is restated in a more precise form in Theorem 5.1. Because of Hall’s counterexample to unknottedness for compact minimal
Embedded Minimal Surfaces, Exotic Spheres, and Manifolds with Positive Ricci Curvature

W MEEKS,L SIMON,ST YAU

DOI: https://doi.org/10.2307/2007026

IF: 4.795

1982-01-01

Annals of Mathematics

Abstract:Let N be a three dimensional Riemannian manifold. Let E be a closed embedded surface in N. Then it is a question of basic interest to see whether one can deform : in its isotopy class to some canonical embedded surface. From the point of view of geometry, a natural canonical surface will be the extremal surface of some functional defined on the space of embedded surfaces. The simplest functional is the area functional. The extremal surface of the area functional is called the minimal surface. Such minimal surfaces were used extensively by Meeks-Yau [MY21 in studying group actions on three dimensional manifolds. In [MY2], the theory of minimal surfaces was used to simplify and strengthen the classical Dehn's lemma, loop theorem and the sphere theorem. In the setting there, one minimizes area among all immersed surfaces and proves that the extremal object is embedded. In this paper, we minimize area among all embedded surfaces isotopic to a fixed embedded surface. In the category of these surfaces, we prove a general existence theorem (Theorem 1). A particular consequence of this theorem is that for irreducible manifolds an embedded incompressible surface is isotopic to an embedded incompressible surface with minimal area. We also prove that there exists an embedded sphere of least area enclosing a fake cell, provided the complementary volume is not a standard ball, and provided there exists no embedded one-sided RP2. By making use of the last result, and a cutting and pasting argument, we are able to settle a well-known problem in the theory of three dimensional manifolds. We prove that the covering space of any irreducible orientable three dimensional manifold is irreducible. It is possible to exploit our existence theorem to study
Minimal surfaces in $\mathbb{R}^4$ like the Lagrangian catenoid

Jaehoon Lee

DOI: https://doi.org/10.48550/arXiv.2101.06836

2021-01-18

Abstract:In this paper, we discuss complete minimal immersions in $\mathbb{R}^N$($N\geq4$) with finite total curvature and embedded planar ends. First, we prove nonexistence for the following cases: (1) genus 1 with 2 embedded planar ends, (2) genus $\neq4$, hyperelliptic with 2 embedded planar ends like the Lagrangian catenoid. Then we show the existence of embedded minimal spheres in $\mathbb{R}^4$ with 3 embedded planar ends. Moreover, we construct genus $g$ examples in $\mathbb{R}^4$ with $d$ embedded planar ends such that $g\geq 1$ and $g+2\leq d\leq 2g+1$. These examples include a family of embedded minimal tori with 3 embedded planar ends.

Differential Geometry
Topological control for min-max free boundary minimal surfaces

Giada Franz,Mario B. Schulz

2023-08-15

Abstract:We establish general bounds on the topology of free boundary minimal surfaces obtained via min-max methods in compact, three-dimensional ambient manifolds with mean convex boundary. We prove that the first Betti number is lower semicontinuous along min-max sequences converging in the sense of varifolds to free boundary minimal surfaces. In the orientable case, we obtain an even stronger result which implies that if the number of boundary components increases in the varifold limit, then the genus decreases at least as much. We also present several compelling applications, such as the variational construction of a free boundary minimal trinoid in the Euclidean unit ball.

Differential Geometry
Index and topology of minimal hypersurfaces in R^n

Chao Li

DOI: https://doi.org/10.48550/arXiv.1605.09693

2016-05-31

Differential Geometry

Abstract:In this paper, we consider immersed two-sided minimal hypersurfaces in $\mathbb{R}^n$ with finite total curvature. We prove that the sum of the Morse index and the nullity of the Jacobi operator is bounded from below by a linear function of the number of ends and the first Betti number of the hypersurface. When $n=4$, we are able to drop the nullity term by a careful study for the rigidity case. Our result is the first effective generalization of Li-Wang. Using our index estimates and ideas from the recent work of Chodosh-Ketover-Maximo, we prove compactness and finiteness results of minimal hypersurfaces in $\mathbb{R}^4$ with finite index.
The Calabi-Yau problem for minimal surfaces with Cantor ends

Franc Forstneric

DOI: https://doi.org/10.48550/arXiv.2202.07601

2022-07-14

Abstract:We show that every connected compact or bordered Riemann surface contains a Cantor set whose complement admits a complete conformal minimal immersion in $\mathbb R^3$ with bounded image. The analogous result holds for holomorphic immersions into any complex manifold of dimension at least $2$, for holomorphic null immersions into $\mathbb C^n$ with $n\ge 3$, for holomorphic Legendrian immersions into an arbitrary complex contact manifold, and for superminimal immersions in any self-dual or anti-self-dual Einstein four-manifold.

Differential Geometry,Complex Variables
Willmore Surfaces of Constant Möbius Curvature

Xiang Ma,Changping Wang

DOI: https://doi.org/10.1007/s10455-007-9065-9

2007-01-01

Annals of Global Analysis and Geometry

Abstract:We study Willmore surfaces of constant Möbius curvature ${\mathcal{K}}$ in ${\mathbb{S}}^4$ . It is proved that such a surface in ${\mathbb{S}}^3$ must be part of a minimal surface in ${\mathbb{R}}^3$ or the Clifford torus. Another result in this paper is that an isotropic surface (hence also Willmore) in ${\mathbb{S}}^4$ of constant ${\mathcal{K}}$ could only be part of a complex curve in ${\mathbb{C}}^2 \cong {\mathbb{R}}^4$ or the Veronese 2-sphere in ${\mathbb{S}}^4$ . It is conjectured that they are the only possible examples. The main ingredients of the proofs are over-determined systems and isoparametric functions.
Complete stable minimal hypersurfaces in positively curved 4-manifolds

Otis Chodosh,Chao Li,Douglas Stryker

2024-01-16

Abstract:We show that the combination of non-negative sectional curvature (or $2$-intermediate Ricci curvature) and strict positivity of scalar curvature forces rigidity of complete (non-compact) two-sided stable minimal hypersurfaces in a $4$-manifold with bounded curvature. In particular, this implies the nonexistence of complete two-sided stable minimal hypersurface in a closed $4$-manifold with positive sectional curvature. Our work leads to new comparison results. We also construct various examples showing rigidity of stable minimal hypersurfaces can fail under other curvature conditions.

Differential Geometry
Minimal surfaces near Hardt-Simon surfaces

Vishnu Nandakumaran

2024-10-30

Abstract:Caffarelli-Hardt-Simon used the minimal surface equation on the Simons cone $C(S^3\times S^3)$ to generate newer examples of minimal hypersurfaces with isolated singularities. Hardt-Simon proved that every area-minimizing quadratic cone $\mathcal{C}$ having only an isolated singularity can be approximated by a unique foliation of $\mathbb R^{n+1}$ by smooth, area-minimizing hypersurfaces asymptotic to $\mathcal C$. This paper uses methods similar to Caffareli-Hardt-Simon to solve the minimal surface equation for the Hardt-Simon surfaces in the sphere for some boundary values. We use gluing methods to construct minimal surfaces over Hardt-Simon surfaces and near quadratic cones.

Differential Geometry,Analysis of PDEs
New Examples of Willmore Surfaces in

Haizhong Li,Luc Vrancken

DOI: https://doi.org/10.1023/A:1022825513863

2003-01-01

Annals of Global Analysis and Geometry

Abstract:A surface : → is called a Willmore surface if it is a criticalsurface of the Willmore functional ∫ ( − 2), where isthe mean curvature and is the square of the length of the secondfundamental form. It is well known that any minimal surface is aWillmore surface. The first nonminimal example of a flat Willmoresurface in higher codimension was obtained by Ejiri. This example whichcan be viewed as a tensor product immersion of (1) and a particularsmall circle in (1), and therefore is contained in (1) gives anegative answer to a question by Weiner. In this paper we generalize theabove mentioned example by investigating Willmore surfaces in (1)which can be obtained as a tensor product immersion of two curves. We inparticular show that in this case too, one of the curves has to be(1), whereas the other one is contained either in (1) or in (1). In the first case, we explicitly determine the immersion interms of elliptic functions, thus constructing infinetely many newnonminimal flat Willmore surfaces in . Also in the latter casewe explicitly include examples.
Minimal surfaces in finite volume hyperbolic 3-manifolds N and in MxS(1), M a finite area hyperbolic surface

Pascal Collin,Laurent Hauswirth,Harold Rosenberg

DOI: https://doi.org/10.48550/arXiv.1304.1773

2013-04-06

Abstract:We consider properly immersed finite topology minimal surfaces S in complete finite volume hyperbolic 3-manifolds N, and in M x S(1), where M is a complete hyperbolic surface of finite area. We prove S has finite total curvature equal to 2\pi times the Euler characteristic of S, and we describe the geometry of the ends of S.

Differential Geometry
A parabolic minimal surface in R3 intersects every nonflat properly embedded minimal surface of bounded curvature

Franc Forstneric

DOI: https://doi.org/10.48550/arXiv.2206.06045

2022-07-05

Abstract:We show that the image of a nonconstant conformal harmonic map $\mathbb C\to \mathbb R^3$, not necessarily proper and possibly with branch points, intersects every properly embedded nonflat minimal surface of bounded curvature in $\mathbb R^3$. The same holds if $\mathbb C$ is replaced by any open conformal surface without nonconstant bounded subharmonic functions.

Differential Geometry
On C$^2$-smooth Surfaces of Constant Width

Brendan Guilfoyle,Wilhelm Klingenberg

DOI: https://doi.org/10.32513/tbilisi/1528768838

2007-04-25

Abstract:A number of results for C$^2$-smooth surfaces of constant width in Euclidean 3-space ${\mathbb{E}}^3$ are obtained. In particular, an integral inequality for constant width surfaces is established. This is used to prove that the ratio of volume to cubed width of a constant width surface is reduced by shrinking it along its normal lines. We also give a characterization of surfaces of constant width that have rational support function. Our techniques, which are complex differential geometric in nature, allow us to construct explicit smooth surfaces of constant width in ${\mathbb{E}}^3$, and their focal sets. They also allow for easy construction of tetrahedrally symmetric surfaces of constant width.

Differential Geometry
Complete minimal surfaces of finite topology in the doubled Schwarzschild 3-manifold

Jaigyoung Choe,Jaehoon Lee,Eungbeom Yeon

2023-07-10

Abstract:We construct a complete embedded minimal surface with arbitrary genus in the doubled Schwarzschild 3-manifold. A classical desingularization method is used for the construction.

Differential Geometry
Isotopies of complete minimal surfaces of finite total curvature

Antonio Alarcon,Franc Forstneric,Finnur Larusson

2024-06-07

Abstract:Let $M$ be a Riemann surface biholomorphic to an affine algebraic curve. We show that the inclusion of the space $\Re \mathrm{NC}_*(M,\mathbb{C}^n)$ of real parts of nonflat proper algebraic null immersions $M\to\mathbb{C}^n$, $n\ge 3$, into the space $\mathrm{CMI}_*(M,\mathbb{R}^n)$ of complete nonflat conformal minimal immersions $M\to\mathbb{R}^n$ of finite total curvature is a weak homotopy equivalence. We also show that the $(1,0)$-differential $\partial$, mapping $\mathrm{CMI}_*(M,\mathbb{R}^n)$ or $\Re \mathrm{NC}_*(M,\mathbb{C}^n)$ to the space $\mathscr{A}^1(M,\mathbf{A})$ of algebraic $1$-forms on $M$ with values in the punctured null quadric $\mathbf{A} \subset \mathbb{C}^n\setminus\{0\}$, is a weak homotopy equivalence. Analogous results are obtained for proper algebraic immersions $M\to\mathbb{C}^n$, $n\ge 2$, directed by a flexible or algebraically elliptic punctured cone in $\mathbb{C}^n\setminus\{0\}$.

Differential Geometry,Complex Variables
Constant Mean Curvature surfaces with prescribed finite topologies

Stephen. J. Kleene

2023-09-15

Abstract:In this article, we construct complete embedded constant mean curvature surfaces in $\mb{R}^3$ with freely prescribed genus and any number of ends greater than or equal to four. Heuristically, the surfaces are obtained by resolving finitely many points of tangency between collections of spheres. The construction relies a family of constant mean curvature surfaces constructed in \cite{Kleene}, constructed as graphs over catenoidal necks of small scale.

Differential Geometry
On the Areas of Genus Zero Free Boundary Minimal Surfaces Embedded in the Unit 3-Ball

McGrath, Peter,Zou, Jiahua

DOI: https://doi.org/10.1007/s12220-024-01726-2

2024-06-27

Journal of Geometric Analysis

Abstract:We prove that the area of each nonflat genus zero free boundary minimal surface embedded in the unit 3-ball is less than the area of its radial projection to . The inequality is asymptotically sharp, and we prove any sequence of surfaces saturating it converges weakly to , as currents and as varifolds.

mathematics

Embeddedness of minimal surfaces with total boundary curvature at most 4π

Embedded minimal surfaces in $\mathbb{S}^3$ and $\mathbb{B}^3$ via equivariant eigenvalue optimization

Bernstein Type Theorems for Minimal Surfaces in $(\Alpha,\beta)$-Space

Embeddedness of least area minimal hypersurfaces

The Topological Uniqueness of Complete Minimal Surfaces of Finite Topological Type

Embedded Minimal Surfaces, Exotic Spheres, and Manifolds with Positive Ricci Curvature

Minimal surfaces in $\mathbb{R}^4$ like the Lagrangian catenoid

Topological control for min-max free boundary minimal surfaces

Index and topology of minimal hypersurfaces in R^n

The Calabi-Yau problem for minimal surfaces with Cantor ends

Willmore Surfaces of Constant Möbius Curvature

Complete stable minimal hypersurfaces in positively curved 4-manifolds

Minimal surfaces near Hardt-Simon surfaces

New Examples of Willmore Surfaces in

Minimal surfaces in finite volume hyperbolic 3-manifolds N and in MxS(1), M a finite area hyperbolic surface

A parabolic minimal surface in R3 intersects every nonflat properly embedded minimal surface of bounded curvature

On C$^2$-smooth Surfaces of Constant Width

Complete minimal surfaces of finite topology in the doubled Schwarzschild 3-manifold

Isotopies of complete minimal surfaces of finite total curvature

Constant Mean Curvature surfaces with prescribed finite topologies

On the Areas of Genus Zero Free Boundary Minimal Surfaces Embedded in the Unit 3-Ball