Abstract:Abstract Recently, nanoparticles have proven to enhance oil recovery on the core-flood scale in challenging high-pressure high-temperature reservoirs. Nanomaterials generally appear to improve oil production through wettability alteration and reduction in interfacial tension between oil and water phases. Besides, they are environmentally friendly and cost-effective enhanced oil recovery techniques. Studying the rheological properties of nanoparticles is critical for field applications. The instability of nanoparticle dispersion due to aggregation is considered as an unfavorable phenomenon in nanofluid flooding while conducting an EOR process. In this study, wettability behavior and rheological properties of surface-treated silica nanoparticles using internal olefins sulfonates (IOS 20–24 and IOS 19–23 ), anionic surfactants were investigated. Surface modification effect on the stability of the colloidal solution in porous media and oil recovery was inspected. The rheology of pure and surface-treated silica nanoparticles was investigated using a HPHT rheometer. Morphology and particle size distributions of pure and coated silica nanoparticles were studied using a field emission scanning electron microscope. A series of core-flood runs was conducted to evaluate the oil recovery factor. The coated silica nanoparticles were found to alter rheological properties and exhibited a shear-thinning behavior as the stability of the coated silica nanoparticles could be improved considerably. At low shear rates, the viscosity slightly increases, and the opposite happens at higher shear rates. Furthermore, the surface-modified silica nanoparticles were found to alter the wettability of the aqueous phase into strongly water-wet by changing the contact angle from 80° to 3° measured against glass slides representing sandstone rocks. Oil–water IFT results showed that the surface treatment by surfactant lowered the oil–water IFT by 30%. Also, the viscosity of brine increased from 0.001 to 0.008 Pa s by introducing SiO 2 nanoparticles to the aqueous phase for better displacement efficiency during chemical-assisted EOR. The core-flood experiments revealed that the ultimate oil recovery is increased by approximately 13% with a surfactant-coated silica nanofluid flood after the conventional waterflooding that proves the potential of smart nanofluids for enhancing oil recovery. The experimental results imply that the use of surfactant-coated nanoparticles in tertiary oil recovery could facilitate the displacement efficiency, alter the wettability toward more water-wet and avoid viscous fingering for stable flood front and additional oil recovery.

Slow release of surfactant by smart thermosensitive polymer-functionalized mesoporous silica for enhanced oil recovery: Synthesis and characterization

Smart Nanoparticles for Conformance Improvement in Waterflooding

Development and characterization of nanostructured surfactant compositions with prolonged action and stimuli-responsible physicochemical properties

Evaluating the potential of surface-modified silica nanoparticles using internal olefin sulfonate for enhanced oil recovery

Advanced polymer‐based surfactant for improved heat and salinity stability in enhanced oil recovery processes

Nanofluid of Petroleum Sulfonate Nanocapsules for Enhanced Oil Recovery in High-Temperature and High-Salinity Reservoirs

Study on interfacial tension, wettability and viscosity in different salinities of synthesized a new polymeric surfactant for improving oil recovery

Nanoparticle-Assisted Surfactant/Polymer Formulations for Enhanced Oil Recovery in Sandstone Reservoirs: From Molecular Interaction to Field Application

Development of surfactant formulation for high-temperature off-shore carbonate reservoirs

Improved Oil Recovery by Chemical Flood from High Salinity Reservoirs-Single-Well Surfactant Injection Test

Optimizing synthesis and application of an enhanced oil recovery agent: stability assessment of the optimized nanostructured PNIPAM/PS core–shell polymer using a developed DLVO-based model

A New Thermal Stable and Salt Tolerant Alkyl Polyether Benzyl Sulfonate Surfactant with Ultralow Interfacial Tensions for Enhanced Oil Recovery

A high temperature resistance and hyper‐dispersed nanoparticle grafted by multi‐monomer via in‐situ polymerization: Preparation, characterization, and its imbibition performance

Potential Application of Rhamnolipid-Silica Nanoparticle Complex for Enhanced Oil Recovery Studied with Molecular DynamicsSimulations

Surfactant-Nanoparticle Formulations for Enhanced Oil Recovery in Calcite-Rich Rocks

Dynamic properties of microspheres at the nanoscale and mechanisms for their application in enhanced oil recovery

Effect of Environment-Friendly Non-Ionic Surfactant on Interfacial Tension Reduction and Wettability Alteration; Implications for Enhanced Oil Recovery

Performance of surfactant blend formulations for controlling gas mobility and foam propagation under reservoir conditions

Evaluating the feasibility of using a rapeseed oil‐derived anionic polymeric surfactant for enhanced oil recovery from carbonate/sandstone composite reservoirs

Carboxyl/alkyl composite silica-based amphiphilic nanoparticles enhanced spontaneous imbibition of low permeability sandstone rocks at reservoir conditions

Stabilizing silica nanoparticles in high saline water by using ionic surfactants for wettability alteration application